Printing specification Drawn Checked Approved Signature Danbi.park Yena.park Jongok.kim MMM/DD/YYYY Jan/11/2013 Jan/11/2013 Jan/11/2013 1. Model Description Model name : 42PN450D-ZA Brand name : LG Part number 2nd, 3rd Suffix : EK Product name : 42PN450D (Revision number) : MFL67710003 (1301-REV00) 2. Printing Specification 1.
Part number Pagination sheet Total pages Front MFL67710003 : 32 pages (1301-REV00) Back (Eng) P/No.
OWNER’S MANUAL PLASMA TV Please read this manual carefully before operating your set and retain it for future reference. PN45** PN65** P/NO : MFL67710003 (1301-REV00) Printed in Korea www.lg.
2 TABLE OF CONTENTS ENGLISH TABLE OF CONTENTS 3 Licenses 3 OPEN SOURCE SOFTWARE NOTICE 3 EXTERNAL CONTROL DEVICE SETUP 4 Safety Instructions 10 Installation Procedure 10 ASSEMBLING AND PREPARING 10 13 14 15 16 16 18 19 20 Unpacking Separate purchase Parts and buttons Lifting and moving the TV Setting up the TV - Attaching the stand Mounting on a table Mounting on a wall Tidying cables 21 MAKING CONNECTIONS 21 21 22 22 23 23 24 24 24 24 25 Antenna Connection Satellite dish Connection HDMI
LICENSES / OPEN SOURCE SOFTWARE NOTICE / EXTERNAL CONTROL DEVICE SETUP 3 Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
4 SAFETY INSTRUCTIONS ENGLISH Safety Instructions Please read these safety precautions carefully before using the product.
SAFETY INSTRUCTIONS Do not drop the product or let it fall over when connecting external devices. yy Otherwise, this may result in injury or damage to the product. Des icca nt Keep the packing anti-moisture material or vinyl packing out of the reach of yy children. Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
6 SAFETY INSTRUCTIONS ENGLISH Do not disassemble, repair or modify the product at your own discretion. yy Fire or electric shock accident can occur. Contact the service centre for check, calibration or repair. If any of the following occur, unplug the product immediately and contact your local yy service centre.
SAFETY INSTRUCTIONS Install the product where no radio wave occurs. yy There should be enough distance between an outside antenna and power lines to yy keep the former from touching the latter even when the antenna falls. This may cause an electric shock. Do not install the product on places such as unstable shelves or inclined surfaces. yy Also avoid places where there is vibration or where the product cannot be fully supported.
8 SAFETY INSTRUCTIONS ENGLISH Do not turn the product On/Off by plugging-in or unplugging the power plug to the yy wall outlet. (Do not use the power plug for switch.) It may cause mechanical failure or could give an electric shock. Please follow the installation instructions below to prevent the product from yy overheating. --The distance between the product and the wall should be more than 10 cm. --Do not install the product in a place with no ventilation (e.g., on a bookshelf or in a cupboard).
SAFETY INSTRUCTIONS Contact the service centre once a year to clean the internal parts of the product. yy Accumulated dust can cause mechanical failure. Refer all servicing to qualified service personnel. Servicing is required when the yy apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
10 INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING ENGLISH NOTE yy Image shown may differ from your TV. yy Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. yy The available menus and options may differ from the input source or product model that you are using. yy New features may be added to this TV in the future. yy The TV can be placed in standby mode in order to reduce the power consumption.
ASSEMBLING AND PREPARING 11 ENGLISH Remote Control, Batteries (AAA) (See p. 26) Owner’s manual x1 Power Cord Holder (See p. 20) Desk-mount Screw (Only 42PN45**) (See p. 18) Stand Body / Stand Base (See p. 16) Protection Cover (Only 50PN45**, 50PN65**) (See p. 17) Power Cord x7 M4 x 14 Screw for assembly (Only 42PN45**) (See p. 16) Ferrite core (Depending on model) (See p. 12) x7 M5 x 16 Screw for assembly (Only 50PN45**, 50/60PN65**) (See p.
12 ASSEMBLING AND PREPARING ENGLISH NOTE The items supplied with your product may vary depending on the model. yy Product specifications or contents of this manual may be changed without prior notice due to upgrade yy of product functions. How to use the ferrite core 1 Use the ferrite core to reduce the electromagnetic interference in the power cable. Wind the power cable on the ferrite core once. Place the ferrite core close to the TV and a wall plug.
ASSEMBLING AND PREPARING 13 Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These devices only work with certain models. LG Audio Device Compatibility PN45** PN65** LG Audio Device • • The model name or design may be changed depending on the upgrade of product functions, manufacturer’s circumstances or policies.
14 ASSEMBLING AND PREPARING ENGLISH Parts and buttons Screen Buttons Power indicator Button Description Turns the power on or off. Selects the highlighted menu option or confirms an input S Accesses the main menus, or saves your input and exits the menus. Changes the input source H H Adjusts the volume level. Scrolls through the saved programmes.
ASSEMBLING AND PREPARING Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. yy When transporting a large TV, there should be at least 2 people. yy When transporting the TV by hand, hold the TV as shown in the following illustration. CAUTION yy Avoid touching the screen at all times, as this may result in damage to the screen.
16 ASSEMBLING AND PREPARING ENGLISH Setting up the TV Image shown may differ from your TV.
ASSEMBLING AND PREPARING 17 ENGLISH To detach the stand (Only 50PN45**, 50PN65**) 1 CAUTION yy When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. yy Make sure that the screws are inserted correctly and fastened securely. If they are not fastened securely enough, the TV may tilt forward after being installed.
18 ASSEMBLING AND PREPARING ENGLISH Mounting on a table 1 Lift and tilt the TV into its upright position on a table. -- Leave a 10 cm (minimum) space from the wall for proper ventilation. Adjusting the angle of the TV to suit view (This feature is not available for all models.) Adjusting the angle of the TV to suit view Swivel 20 degrees to the left or right and adjust the angle of the TV to suit your view.
ASSEMBLING AND PREPARING A yy Make sure that children do not climb on or hang on the TV. B NOTE yy Use a platform or cabinet that is strong and large enough to support the TV securely. yy Brackets, bolts and ropes are not provided. You can obtain additional accessories from your local dealer. Mounting on a wall Attach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor.
20 ASSEMBLING AND PREPARING ENGLISH Tidying cables 1 Install the Power Cord Holder and Power Cord. It will help prevent the power cable from being removed by accident. (Only 42PN45**) Power cord holder (Only 50PN45**, 50/60PN65**) Power cord holder 2 Gather and bind the cables with the Cable Holder. Cable holder CAUTION yy Do not move the TV by holding the cable holder and power cable holder, as the cable holders may break, and injuries and damage to the TV may occur.
MAKING CONNECTIONS This section on MAKING CONNECTIONS mainly uses diagrams for the PN45** models. Connect various external devices to the TV and switch input modes to select an external device. For more information of external device’s connection, refer to the manual provided with each device. Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. NOTE yy The external device connection may differ from the model.
22 MAKING CONNECTIONS IN 1(PC) IN 1(PC) ENGLISH DVI to HDMI connection HDMI Connection AUDIO IN (PC) IN 2 L/MONO DVD / Blu-Ray / PC HD Cable Box / HD STB RED WHITE (*Not Provided) (*Not Provided) HDMI (*Not Provided) (Only HDMI IN 1(PC)) AUDIO OUT Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown. DVI OUT DVD / Blu-Ray / HD Cable Box / PC Choose any HDMI input port to connect.
MAKING CONNECTIONS Composite Connection AUDIO IN (PC) AV IN 2 ENGLISH Component Connection 23 AUDIO IN (PC) L/MONO L/MONO COMPONENT IN COMPONENT IN AV IN 2 RED WHITE (*Not Provided) RED WHITE RED BLUE GREEN L (MONO) AUDIO RED VIDEO WHITE AUDIO YELLOW VIDEO YELLOW RED WHITE RED BLUE GREEN (*Not Provided) R DVD / Blu-Ray / HD Cable Box Transmits analog video and audio signals from an external device to the TV.
24 MAKING CONNECTIONS USB Connection USB IN ENGLISH Audio Connection (*Not Provided) USB (*Not Provided) Connect a USB storage device such as a USB flash memory, external hard drive, or a USB memory card reader to the TV and access the My media menu to use various multimedia files. CI module Connection OPTICAL AUDIO IN Digital Audio System (*Not Provided) You may use an external audio system instead of the built-in speaker.
MAKING CONNECTIONS AV 1 IN / OUT (*Not Provided) AUDIO / VIDEO Transmits the video and audio signals from an external device to the TV set. Connect the external device and the TV set with the euro scart cable as shown. Output Type Current input mode Digital TV AV1 (TV Out1) Digital TV Analogue TV, AV Component Analogue TV HDMI 1 TV Out : Outputs Analogue TV or Digital TV signals. NOTE yy Any Euro scart cable used must be signal shielded.
26 REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. CAUTION yy Do not mix old and new batteries, as this may damage the remote control.
NETWORK SETTING 27 ENGLISH Network setting (Depending on model) Image shown may differ from your TV. Wired Network Connection LAN Internet connection Wired router 1 Press the SETTING button to access the main menu. 2 Select the NETWORK → Network Setting menu. NETWORK Move 4 The device automatically tries to connect to the network. Network Setting Network connecting... OK Network Setting Network Status Cancel Previous 5 The connected network is displayed.
28 USING THE USER GUIDE ENGLISH Using the User guide User Guide allows you to more easily access the detailed TV information. Press SETTINGS to access the main menus. Press the RED button to access the Customer Support menus. Press the Navigation buttons to scroll to User Guide and press OK. 1 2 3 1 User Guide OPTION > To set language SETTING PROGRAMME Setting PICTURE, SOUND Setting OPTION Language You can select the language of the menu displayed on the screen and the digital sound broadcasting.
MAINTENANCE / TROUBLESHOOTING 29 ENGLISH MAINTENANCE Cleaning your TV Clean your TV regularly to keep the best performance and to extend the product lifespan. CAUTION yy Make sure to turn the power off and disconnect the power cord and all other cables first. yy When the TV is left unattended and unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges.
30 SPECIFICATIONS ENGLISH SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions. For the power supply and power consumption, refer to the label attached to the product. MODELS Dimensions With stand (mm) (W x H x D) Without stand (mm) Weight With stand (kg) Without stand (kg) 50PN45** 50PN450D-ZA 50PN451D-ZA 50PN452D-ZA 50PN450B-ZA 50PN4503-ZA 50PN450D-ZE 50PN451D-ZE 50PN452D-ZE 50PN450B-ZE 50PN450D-ZF 50PN451D-ZF 50PN452D-ZF 50PN450B-ZF 1168.
SPECIFICATIONS Programme coverage Maximum number of storable programmes Digital TV Analogue TV DVB-T DVB-C DVB-S/S2 DVB-T/T2 DVB-C DVB-T DVB-C PAL/SECAM B/G/I/D/K, SECAM L/L’ 3 VHF, UHF C-Band, Ku-Band VHF, UHF 6,000 1,800 VHF: E2 to E12, UHF : E21 to E69, CATV: S1 to S20, HYPER: S21 to S47 External antenna impedance 75 Ω 1 2 3 Only satellite models Only DVB-T2 support models Except for DVB-T2 support models HDMI/DVI-DTV supported mode Component port connecting information Resolution Hori
Please contact LG First. If you have any inquiries or comments, please contact LG customer information centre. Customer Information Centre Country Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service.