OWNER’S MANUAL LED TV* * LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. 55LA9700 65LA9700 *MFL67652632* P/NO : MFL67652632 (1403-REV03) www.lg.
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product. WARNING/CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS yyDo not press strongly upon the panel with a hand Power Supply or a sharp object such asShort-circuit a nail, pencil or pen, or Breaker make a scratch on it. yyProtect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. yyOnly use attachments/accessories specified by the manufacturer.
IMPORTANT SAFETY INSTRUCTIONS yyDo not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit). Antenna grounding according to the National Electrical Code, ANSI/NFPA 70 Antenna Lead in Wire Ground Clamp Electric Service Equipment yyGrounding (Except for devices which are not grounded.) Ensure that you connect the earth ground wire to Power Supply prevent possible electricShort-circuit shock (i.
IMPORTANT SAFETY INSTRUCTIONS Preventing “Image burn” or “Burn-in” on your TV screen For USA and Canada FCC NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
IMPORTANT SAFETY INSTRUCTIONS Viewing 3D Imaging WARNING Viewing Environment yyViewing Time - When watching 3D content, take 5 - 15 minute breaks every hour. Viewing 3D content for a long period of time may cause headache, dizziness, fatigue or eye strain. Those that have a photosensitive seizure or chronic illness ENGLISH yySome users may experience a seizure or other abnormal symptoms when they are exposed to a flashing light or particular pattern from 3D content.
LICENSES / OPEN SOURCE SOFTWARE NOTICE 7 LICENSES Supported licenses may differ by model. For more information about licenses, visit www.lg.com . Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Manufactured under license under U.S.
TABLE OF CONTENTS TABLE OF CONTENTS 2 IMPORTANT SAFETY INSTRUCTIONS 6 Viewing 3D Imaging 7 LICENSES 7 OPEN SOURCE SOFTWARE NOTICE 32 Magic Remote Control Functions 33 33 33 Registering Magic Remote Control How to use Magic Remote Control Precautions to Take when Using the Magic Remote Control 34 WATCHING TV ENGLISH 8 TABLE OF CONTENTS 34 Turning the TV on for the First Time 9 Installation Procedure 35 Using the user guide 9 ASSEMBLING AND PREPARING 36 SPECIFICATIONS 9 11 12 13
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING 9 Installation Procedure 1 Open the package and make sure all the accessories are included. 2 Attach the stand to the TV set. 3 Connect an external device to the TV set. 4 Make sure the network connection is available. You can use the TV network functions only when the network connection is made. ASSEMBLING AND PREPARING Unpacking CAUTION yyDo not use any unapproved items to ensure the safety and product life span.
ASSEMBLING AND PREPARING ENERGY AV MODE INPUT TV SAVING 1 4 7 LIST 2 5 3 6 8 9 0 FLASHBK MARK FAV VOL 3D CH P A G E MUTE MENU INFO Tag On Q.MENU ENTER BACK EXIT L/R SELECT FREEZE RATIO Magic Remote Control, Batteries (AA) (See p. 32) Owner’s Manual Tag On (For 55LA9700) ENGLISH Stand Base (See p. 14) Stand Screws 4 EA, M4 x 14 (See p. 14) Wall Mount Inner Spacers 4 EA (See p. 18) (For 55LA9700) (For 65LA9700) Wall Mount Screws 4 EA, M6 x 54 (See p.
ASSEMBLING AND PREPARING 11 Optional Extras Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These devices only work with certain models. The model name or design may be changed manufacturer’s circumstances or policies.
ASSEMBLING AND PREPARING Parts and Buttons Screen Video call camera OK ENGLISH SETTINGS INPUT Speakers Remote control sensor Buttons Power Indicator Button / / ( / ( (OK / Description ) Scrolls through the saved channels. ) Adjusts the volume level. Selects the highlighted menu option or confirms an input. ) (SETTINGS) Accesses the main menus, or saves your input and exits the menus. (INPUT Changes the input source. ( ) ) Turns the power on or off.
ASSEMBLING AND PREPARING Lifting and moving the TV When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. 13 yyWhen transporting a large TV, there should be at least 2 people. yyWhen transporting the TV by hand, hold the TV as shown in the following illustration. CAUTION yyAvoid touching the screen at all times, as this may result in damage to the screen.
ASSEMBLING AND PREPARING Setting up the TV You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainment center or other furniture. Attaching the stand If you are not mounting the TV to a wall, use the following instructions to attach the stand. CAUTION yyWhen attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. yyMake sure that the screws are fastened tightly.
ASSEMBLING AND PREPARING Mounting on a table 1 15 Securing the TV to a wall (optional) (Depending upon model) Lift and tilt the TV into its upright position on a table. - Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation. 10 cm (4 inches) 10 cm 10 cm 10 cm 2 10 cm Connect the power cord to a wall outlet. CAUTION yyDo not place the TV near or on sources of heat, as this may result in fire or other damage.
ASSEMBLING AND PREPARING Tidying cables Using Sliding Speaker Gather and bind the cables with the Cable Holder on the back of the TV. Sliding Speaker 1 When TV is turned ON, the hidden Speaker slides out from inside the TV. 2 Go to More Settings SOUND Sliding Speaker to set Sliding Speaker.
ASSEMBLING AND PREPARING Mounting on a wall 17 CAUTION An optional wall mount can be used with your LG Television. Consult with your local dealer for a wall mount that supports the VESA standard used by your TV model. Carefully attach the wall mount bracket at the rear of the TV. Install the wall mount bracket on a solid wall perpendicular to the floor. If you are attaching the TV to other building materials, please contact qualified personnel to install the wall mount.
ASSEMBLING AND PREPARING CAUTION yyDisconnect the power before moving or installing the TV. Otherwise electric shock may occur. yyIf you install the TV on a ceiling or slanted wall, it may fall and result in severe injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel. yyDo not over tighten the screws as this may cause damage to the TV and void your warranty. yyUse the screws and wall mounts that meet the VESA standard.
ASSEMBLING AND PREPARING Using Built-in Camera Preparing Built-in Camera You can make a Skype video call or use the motion recognition function using the built-in camera of the TV. This TV does not support the use of an external camera. 1 19 Pull up the built-in camera at the back of the TV. NOTE ENGLISH yyBefore using the built-in camera, you must recognize the fact that you are legally responsible for the use or misuse of the camera by the relevant national laws including the criminal law.
3 ASSEMBLING AND PREPARING Pull down the built-in camera when you are not using it. Checking the Camera’s Shooting Range 1 Press the SMART button on the remote control to display the More menu. 2 Select Settings from the More menu and then press the Wheel (OK) button. 3 Go to OPTION Camera Setting Help and press the Wheel (OK) button. NOTE yyThe optimal distance from the camera to use the motion recognition function is between 1.5 m (5 ft) and 4.5 m (15 ft).
MAKING CONNECTIONS 21 MAKING CONNECTIONS You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information on external device’s connection, refer to the manual provided with each device. NOTE yyIf you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR.
MAKING CONNECTIONS Connecting to a HD receiver, DVD Player or VCR Connect a HD receiver, DVD Player, or VCR to the TV and select an appropriate input mode. HDMI Connection HDMI is the best way to connect a device. Transmits digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown in the following illustration. NOTE yyUse the latest High Speed HDMI™ Cable that supports CEC (Customer Electronics Control) function.
MAKING CONNECTIONS 23 DVI to HDMI Connection Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown in the following illustration. To transmit an audio signal, connect an audio cable. NOTE yyWhen using the HDMI/DVI cable, Single link only is supported. Choose any HDMI input port to connect. It does not matter which port you use.
MAKING CONNECTIONS Connecting to a mobile phone Mobile High-definition Link (MHL) is an interface for transmitting digital audio/visual signals from mobile phones to television sets. NOTE 3 (MHL) yyConnect the mobile phone to the HDMI/DVI IN 3 (MHL) port to view the phone screen on the TV. yyThis only works with an MHL-enabled phone. yyWith some MHL supporting mobile phones, you can use the TV remote to control the phone. yyAn MHL passive cable is needed to connect the TV and a mobile phone.
MAKING CONNECTIONS 25 Component Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with a component cable as shown in the following illustration. NOTE yyIf cables are installed incorrectly, it could cause the image to display in black and white or with distorted color. yyCheck to ensure the cables are matched with the corresponding color connection.
MAKING CONNECTIONS Composite Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown in the following illustration. NOTE yyIf you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the TV. yyCheck to ensure the cables are matched with the corresponding color connection. AV VIDEO AUDIO IN COMPONENT PR PB Y ENGLISH YELLOW (Use the composite video cable provided.
MAKING CONNECTIONS 27 Connecting a PC NOTE yyIt is recommended to use an HDMI connection for the best image quality. yyDepending upon the graphics card, DOS mode video may not work if a HDMI to DVI Cable is in use. yyIn PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness.
MAKING CONNECTIONS Method B: DVI to HDMI Connection Choose any HDMI input port to connect. It does not matter which port you use.
MAKING CONNECTIONS 29 Connecting to an Audio System You can use an optional external audio system instead of the built-in speaker. Digital Optical Audio Connection Transmits a digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audio cable as shown in the following illustration. NOTE yyDo not look into the optical output port. Looking at the laser beam may damage your vision.
MAKING CONNECTIONS Connecting Headphones Listening to sound with headphones NOTE yyAUDIO menu options are disabled when using headphones. yyWhen changing AV MODE with headphones connected, the change is applied to video but not to audio. yyOptical Digital Audio Out is not available when headphones are connected. yyHeadphone impedance: 16 Ω yyMax audio output: 0.6 mW to 1.3 mW yyHeadphone jack size: 0.35 cm (0.13 inches) CAUTION yyDo not use headsets (earphones) at high volume or for a long time.
MAKING CONNECTIONS 31 Connecting a USB Device Connect a USB storage device such as USB flash memory, external hard drive, or a USB memory card reader to the TV and access the Smart Share menu to use various multimedia files. NOTE yySome USB Hubs may not work. If a USB device connected using a USB Hub is not detected, connect it directly to the USB port on the TV. Choose any USB input port to connect. It does not matter which port you use.
Magic Remote Control Functions Magic Remote Control Functions When the message “Magic remote control battery is low. Change the battery.” is displayed, replace the battery. To install batteries, open the battery cover, replace and ends to the label inside the compartment, batteries (1.5 V AA) matching and close the battery cover. Failure to match the correct polarities of the battery may cause the battery to burst or leak, resulting in fire, personal injury, or ambient pollution.
Magic Remote Control Functions 33 Registering Magic Remote Control The Magic Remote Control operates by pairing with your TV. Please register the remote as follows. How to register the Magic Remote Control To register automatically, turn the TV on and press the Wheel (OK). When registration is completed, the completion message appears on the screen. (Wheel) If registration fails, turn the TV off and back on, then press the Wheel (OK) to complete registration.
WATCHING TV WATCHING TV Using camera and microphone Turning the TV on for the First Time Setting is complete When you turn the TV on for the first time, the Initial setting screen appears. Select a language and customize the basic settings. 1 Connect the power cord to a power outlet. 2 In Standby mode, press the power button on the remote control to turn the TV on. The Initial setting screen appears if you turn the TV on for the first time.
USING THE USER GUIDE USING THE USER GUIdE 1 User Guide Check with your remote control right now. User Guide allows you to easily access detailed TV information. 1 2 Press SMART Home menu. button to access the Smart To use input device To set time options CHANNEL Setting To set TV lock options PICTURE, SOUND Setting To set language OPTION Select User Guide and press the (OK) button.
SPECIFICATIONS SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions.
SPECIFICATIONS HDMI (DTV) supported mode HDMI (PC) supported mode (HDCP 1.4) (HDCP 1.4) Horizontal Frequency (kHz) Vertical Frequency (Hz) 31.469 31.50 59.94 60.00 640 x 350 31.468 70.09 720 x 400 31.469 70.08 1280 x 720 44.96 45.00 59.94 60.00 640 x 480 31.469 59.94 800 x 600 37.879 60.31 59.94 60.00 23.97 24.000 29.976 30.00 59.94 60 1024 x 768 48.363 60.00 1152 x 864 54.348 60.053 1920 x 1080 33.72 33.75 26.97 27.000 33.716 33.75 67.43 67.500 1280 x 1024 63.981 60.
SPECIFICATIONS [ULTRA HD] Video Supported Codec yyMaximum : 3840 x 2160 @ 30p yyMaximum data transfer rate 3840 x 2160 (H.264 L5.1) : 50Mbps (megabits per second) 3840 x 2160 (HEVC L5.0) : 25Mbps (megabits per second) Extension .mkv / .mp4 / .ts .ts Codec Video H.264 / AVC Audio Dolby Digital, Dolby Digital Plus, AAC, HE-AAC Video HEVC Audio Dolby Digital, Dolby Digital Plus, AAC, HE-AAC NOTE ENGLISH yyNew codecs can be updated through SW upgrade.
SPECIFICATIONS 39 3D supported mode yyVideo, which is input as below media contents is switched into the 3D screen automatically. 3D supported mode automatically Input Signal 1080p HDMI 1080i 720p 480p 1080p Vertical Frequency (Hz) 54.00 24 67.50 30 27.00 24 33.75 30 67.50 60 Playable 3D video format F/P, L/A S/S, T&B, S/S Full S/S, T&B 67.50 F/P, F/A 33.75 S/S, T&B, S/S Full 90.00 45.00 F/P, L/A 60 S/S, T&B, S/S Full 63.00 F/P, L/A 31.50 T/B, S/S, S/S Full 33.
SPECIFICATIONS / EXTERNAL CONTROL DEVICE SETUP 3D supported mode manually Input Signal TV - ATV(CVBS) - Component - HDMI-PC HDMI-DTV USB / DLNA (Movie) ENGLISH USB / DLNA (Photo) Playable 3D video format 2D to 3D, S/S, T&B 1080p 2D to 3D, S/S, T&B, C/B, R/I, C/I (60Hz : F/S) Others 2D to 3D, S/S, T&B Interlace 2D to 3D, S/S, T&B Progressive 2D to 3D, S/S, T&B, C/B, R/I, C/I (60Hz : F/S ) 704 x 480p (Over) 2D to 3D, S/S, T&B, C/B, R/I, C/I (60Hz : F/S ) 704 x 480i (Over) 2D to
MAINTENANCE / TROUBLESHOOTING 41 MAINTENANCE Cleaning Your TV Clean your TV regularly to keep it at peak performance and to extend the product lifespan. CAUTION yyBefore cleaning, turn the power off and disconnect the power cord and all other cables. yyWhen the TV is left unattended or unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges.
CHILD SAFETY: It Makes A Difference How and Where You Use Your Flat Panel Display Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind: THE ISSUE yy The home theater entertainment experience is a growing trend and larger flat panel displays are popular purchases. However, flat panel displays are not always supported on the proper stands or installed according to the manufacturer’s recommendations.
LG Customer Information Center The model and serial number of the TV is located on the back and one side of the TV. Record it below should you ever need service. MODEL SERIAL For inquires or comments, visit www.lg.com or call; 1-800-243-0000 1-888-865-3026 1-888-542-2623 USA, Consumer User USA, Commercial User CANADA Register your product Online! www.lg.
