User Guide

Sets the Color Gamut to Adobe RGB standards.
Fine Tune
This is used when experts control it by using a test pattern. You can control it by
selecting areas of six colors (Red/Green/Blue/Cyan/Magenta/Yellow).
For normal images, adjustments may not result in noticeable Color changes.
Color Adjustment
To make the image more colorful and lively adjust the Color and saturation of the
picture.
Select Color
From Red/Green/Blue/Cyan/Magenta/Yellow, select a tone to adjust.
Adjust Saturation / Adjust Tint / Adjust Luminance
Adjust the chroma/tint/luminance of the tone in the range of -30 to +30.
White Balance
The function to adjust each color to be reproduced more accurately based on white
allows you to adjust the overall color tone of the screen to your preference.
Color Temperature
You can set the color to make the display look cooler or warmer.
Method
This method is used for fine-tuning the color temperature setting. You can control
the color temperature at two points of the bright part and dark part of the video if you
select 2 Points, at each point of 10 levels if you select 10 Points Signal Level(%),
and at each point of 22 levels of the video if you select 22 Points Signal Level(%).
Point
Select screen brightness for color temperature adjustment.
If Method is set to 2 Points; use Low to select shadows and High to select
highlights.
If Method is set to 10 Points Signal Level(%); you can select brightness using
numbers indicating 10 levels.
When the Method is set to 22 Points Signal Level(%), you can select the
brightness with the 22 levels of brightness.
68