User Guide

abnormalities in the TV.
If you are using a set-top box, turn it off, and then turn it back on.
Make sure that the set-top box is correctly connected to your TV.
It says there is no signal on the screen.
Check whether the antenna or the cable connected to the external device is properly
connected to the TV.
Go to to choose the connected input.
Check if your external device, such as set-top box or Blu-ray player, is turned on.
I cannot see some channels.
Launch General Channels Channel Tuning Auto Tuning.
If you are using a set-top box, consult its supplier.
The screen is cut off.
Go to Picture and change the Aspect Ratio.
When using an external device (set-top box, game console, etc.), check the screen size
settings in the Settings menu of the device.
The screen shakes after the momentary appearance of vertical/horizontal lines and
net pattern.
Connect wireless telephones, hairdryers, electrical drills, etc. to a different power outlet.
The problem may be caused by high-frequency electronic devices such as another TV or
strong electro-magnetic sources nearby.
Each channel has a different image quality.
Depending on the type of videos provided by the broadcasters, channels may have
different image qualities.
If you are using a set-top box, consult its supplier.
Run Screen Self-diagnosis first. If it is normal, there may be a problem with the
broadcast signal.
111