OWNER’S MANUAL LED TV* * LG LED TVs are LCD TVs with LED backlighting. Click! User Guide Please read this manual carefully before operating your set and retain it for future reference. UB85** UB93** UB95** UB98** UC97** *MFL68066606* www.lg.
TABLE OF CONTENTS ENGLISH ENG TABLE OF CONTENTS 3 3 3 LICENSES OPEN SOURCE SOFTWARE NOTICE EXTERNAL CONTROL DEVICE SETUP 4 SAFETY INSTRUCTIONS 11 - Viewing 3D Imaging (Only 3D models) 13 INSTALLATION PROCEDURE 39 Audio Connection 39 - Digital optical audio Connection 39 Headphone Connection 40 USB Connection 40 CI module Connection 41 Euro Scart Connection 42 REMOTE CONTROL 44 MAGIC REMOTE FUNCTIONS 45 Registering Magic Remote 45 How to use Magic Remote 46 Precautions to T
LICENSES / OPEN SOURCE SOFTWARE NOTICE / EXTERNAL CONTROL DEVICE SETUP 3 Supported licenses may differ by model. For more information about licenses, visit www.lg.com. OPEN SOURCE SOFTWARE NOTICE To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
SAFETY INSTRUCTIONS ENGLISH ENG SAFETY INSTRUCTIONS Please read these safety precautions carefully before using the product.
SAFETY INSTRUCTIONS y When mounting TV onto wall make sure to neatly install and isolate cabling from rear of TV as to not create possibility of electric shock/fire hazard. y Do not plug too many electrical devices into a single multiple electrical outlet. Otherwise, this may result in fire due to over-heating. y Do not drop the product or let it fall over when connecting external devices. Otherwise, this may result in injury or damage to the product.
SAFETY INSTRUCTIONS ENGLISH ENG y Do not spray water on the product or scrub with an inflammable substance (thinner or benzene). Fire or electric shock accident can occur. y Do not allow any impact, shock or any objects to fall into the unit, and do not drop anything onto the screen. You may be injured or the product can be damaged. y Never touch this product or antenna during a thunder or lighting storm. You may be electrocuted.
SAFETY INSTRUCTIONS y Install the product where no radio wave occurs. y There should be enough distance between an outside antenna and power lines to keep the former from touching the latter even when the antenna falls. This may cause an electric shock. y Do not install the product on places such as unstable shelves or inclined surfaces. Also avoid places where there is vibration or where the product cannot be fully supported.
SAFETY INSTRUCTIONS ENGLISH ENG y Make sure there are no objects between the remote control and its sensor. y Signal from Remote Control can be interrupted due to external/internal lighting eg Sunlight, fluorescent lighting. If this occurs turn off lighting or darken viewing area. y When connecting external devices such as video game consoles, make sure the connecting cables are long enough. Otherwise, the product may fall over, which may cause injury or damage the product.
SAFETY INSTRUCTIONS y When cleaning the product and its components, unplug the power first and wipe it with a soft cloth. Applying excessive force may cause scratches or discolouration. Do not spray with water or wipe with a wet cloth. Never use glass cleaner, car or industrial shiner, abrasives or wax, benzene, alcohol etc., which can damage the product and its panel. Otherwise, this may result in fire, electric shock or product damage (deformation, corrosion or breakage).
SAFETY INSTRUCTIONS ENGLISH ENG y You may find different brightness and colour of the panel depending on your viewing position(left/right/top/down). This phenomenon occurs due to the characteristic of the panel. It is not related with the product performance, and it is not malfunction. y Displaying a still image (e.g.
SAFETY INSTRUCTIONS 11 Viewing 3D Imaging (Only 3D models) Viewing Environment y Viewing Time - When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long period of time may cause headache, dizziness, fatigue or eye strain. Those that have a photosensitive seizure or chronic illness y Some users may experience a seizure or other abnormal symptoms when they are exposed to a flashing light or particular pattern from 3D contents.
SAFETY INSTRUCTIONS ENGLISH ENG CAUTION Viewing Environment y Viewing Distance - Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you feel discomfort in viewing 3D contents, move further away from the TV. Viewing Age y Infants/Children - Usage/ Viewing 3D contents for children under the age of 6 are prohibited.
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING 13 Image shown may differ from your TV. Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. The available menus and options may differ from the input source or product model that you are using. New features may be added to this TV in the future. The TV can be placed in standby mode in order to reduce the power consumption.
ASSEMBLING AND PREPARING ENGLISH ENG NOTE How to use the ferrite core (Depending on model) y Use the ferrite core to reduce the electromagnetic interference in the LAN cable. Wind the LAN cable once on the ferrite core. Place the ferrite core close to the TV.
ASSEMBLING AND PREPARING 15 ENGLISH ENG Tag On Remote Control, Batteries (AAA) (Depending on model) The remote control will not be included for all sales market. (See p. 42, 43) Magic remote, batteries (AA) (Only UB85**, UB93**, UB95**, UB98**, UC97**) (See p. 44) Owner’s manual Tag on (Depending on model) Power Cord (Depending on model) Cable holder (Depending on model) (See p. 30, 31) Cinema 3D Glasses The number of 3D glasses may differ depending on the model or country.
ASSEMBLING AND PREPARING ENGLISH ENG Stand Body / Stand Base (Only UC97**) (See p. 26, 27) Stand Screws 8EA, M4 x L20 (Only UB85**-ZA, UB93**, UB95**-ZA) 4EA, M4 x L20 (Only UB85**-ZD, UB95**-ZB, UC97**) (See p. 22, 23, 27) Stand Screws 4EA, M4 x L10 (Only UB85**-ZD, UB95**-ZB, UC97**) (See p.23, 26) Stand Screws 4EA, M6 x L47 (Only 65UB98**) (See p.24) Stand Screws 4EA, M6 x L52 (Only 79/84UB98**) (See p.
ASSEMBLING AND PREPARING ENGLISH ENG Separate purchase 2SWLRQDO H[WUDV FDQ EH FKDQJHG RU PRGL¿HG IRU TXDOLW\ LPSURYHPHQW ZLWKRXW DQ\ QRWL¿FDWLRQ Contact your dealer for buying these items. These devices only work with certain models.
ASSEMBLING AND PREPARING ENGLISH ENG Parts and buttons A type : UB85**-ZA B type : UB85**-ZD Screen Screen Speakers Speakers Remote control and Intelligent1 sensors Power Indicator Joystick Button2 Remote control and Intelligent1 sensors Power Indicator D type : UB95**-ZB C type : UB93**, UB95**-ZA Screen Screen Speakers Speakers Remote control and Intelligent1 sensors LG Logo light Joystick Button2 Joystick Button3 Remote control and Intelligent1 sensors LG Logo light Joystick Butt
ASSEMBLING AND PREPARING F type : 84UB98** E type : 65/79UB98** Screen Screen Speakers Speakers Speakers(Only 79UB98**) Joystick Button G type : 98UB98** Speakers 2 Remote control and Intelligent1 sensors LG Logo light Joystick Button3 H type : UC97** Built-in camera Screen Screen Speakers Remote control and Intelligent1 sensors LG Logo light Sliding Speaker Joystick Button3 Remote control and Intelligent1 sensors LG Logo light Joystick Button2 ENGLISH ENG Built-in camera Built-in ca
ASSEMBLING AND PREPARING ENGLISH ENG 1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment. 2 Joystick Button - This button is located behind the TV screen. 3 Joystick Button - This button is located below the TV screen. NOTE y You can set the LG Logo Light or power indicator light to on or off by selecting General in the main menus.
ASSEMBLING AND PREPARING Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. y When transporting a large TV, there should be at least 2 people. y When transporting the TV by hand, hold the TV as shown in the following illustration. CAUTION y Avoid touching the screen at all times, as this may result in damage to the screen.
ASSEMBLING AND PREPARING ENGLISH ENG Setting up the TV 2 Image shown may differ from your TV. Attaching the stand UB85**-ZA, UB93**, UB95**-ZA 1 Stand Body (L) 1 Stand Body (R) 2 Stand Base 1 Attach the stand to the TV using the upper mounting hole on the back of the TV. 2 Attach the stand to the TV using the lower connection on the back of the TV. M4 x L20 4EA 3 NOTE y Be sure to check the Stand Body (L), (R), when installing on the stand base.
ASSEMBLING AND PREPARING UB85**-ZD, UB95**-ZB 23 ENGLISH ENG 3 1 Stand Body (R) Stand Body (L) Stand Base 1 2 1 Attach the stand to the TV using the upper mounting hole on the back of the TV. 2 Attach the stand to the TV using the lower connection on the back of the TV. 2 4 4EA M4 x L10 NOTE y Be sure to check the Stand Body (L), (R), when installing on the stand base.
ASSEMBLING AND PREPARING 65/79/84UB98** ENGLISH ENG 3 1 (Only 65/79UB98**) 1 2 Wrench Stand Base 4EA 2 M6 x L47 (Only 65UB98**) 1 M6 x L52 (Only 79UB98**) (Only 84UB98**) 1 2 Wrench 4EA M6 x L52 1 4EA (Insulation Holder)
ASSEMBLING AND PREPARING y Make sure that the screws are inserted correctly and fastened securely. (If they are not fastened securely enough, the TV may tilt forward after being installed.) 98UB98** ENGLISH ENG CAUTION 25 1 Wrench 1 2 1 2 Mold M6 x L47 6EA NOTE y The stand screws are already attached at the back of the TV. Please use these attached screw to assemble the TV and stand.
ASSEMBLING AND PREPARING UC97** ENGLISH ENG 2 1 Stand Body (L) Stand Body (R) Stand Base Stand Base M4 x L10 4EA 3 2 Wrench 2 3 1 1 When assembling the stand, lay the front screen protective package included in the product box on a table or flat surface and then place the TV screen face down on the protective package. 2 Attach the stand to the TV using the upper mounting hole on the back of the TV. 3 Attach the stand to the TV using the lower connection on the back of the TV.
ASSEMBLING AND PREPARING 27 1 Lift and tilt the TV into its upright position on a table. - Leave a 10 cm (minimum) space from the wall for proper ventilation. 10 cm 10 cm m 10 c 10 cm 2 Connect the power cord to a wall outlet. M4 x L20 4EA CAUTION y Do not place the TV near or on sources of heat, as this may result in fire or other damage. CAUTION y When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.
ASSEMBLING AND PREPARING Mounting on a wall Securing the TV to a wall ENGLISH ENG (This feature is not available for all models.
ASSEMBLING AND PREPARING 29 Wall mount bracket MSW240 LSW640B A B NOTE y Use the screws that are listed on the VESA standard screw specifications. y The wall mount kit includes an installation manual and necessary parts. y The wall mount bracket is not provided. You can obtain additional accessories from your local dealer. y The length of screws may differ depending on the wall mount. Make sure to use the proper length. y For more information, refer to the manual supplied with the wall mount.
ASSEMBLING AND PREPARING ENGLISH ENG Tidying cables (Only UC97**) Image shown may differ from your TV. 1 Gather and bind the cables with the Cable Holder and the Cable Management. 2 Fix the Cable Management firmly to the TV.
ASSEMBLING AND PREPARING 1 Gather and bind the cables with the Cable Holder. Assembling the AV cover (Only 98UB98**) 1 Insert the cover holder attached to the AV port cover into the hole of the main body of the product as illustrated. 2 Attach the port cover onto the AV port part. (The cover remains attached through the use of a magnet.) 1 AV Port Cover Cable Holder CAUTION y Do not move the TV by holding the cable holders, as the cable holders may break, and injuries and damage to the TV may occur.
ASSEMBLING AND PREPARING ENGLISH ENG Sliding Speaker CAUTION y When the Sliding Speaker is operating (when the TV is turned on/off), ensure that children do not put their hands near the operating part of the speaker (at the bottom of the TV) and that they do not crawl into the space below the TV. - Their hands may get caught and injured due to the operation of the speaker. (Only 98UB98**) Sliding Speaker 1 When TV is turned ON - the hidden speaker slides out from inside the TV.
ASSEMBLING AND PREPARING Preparing Built-in Camera (Only UB98**) (This feature is not available for all models.) You can make a Skype video call or use the motion recognition function using the built-in camera of the TV. This TV does not support the use of an external camera. ENGLISH ENG Using Built-in Camera 33 1 Pull up the slide at the back of the TV.
ASSEMBLING AND PREPARING / MAKING CONNECTIONS ENGLISH ENG MAKING CONNECTIONS 3 Push down the built-in camera when you are not using it. This section on MAKING CONNECTIONS mainly uses diagrams for the UB85** models. Connect various external devices to the TV and switch input modes to select an external device. For more information on external device’s connection, refer to the manual provided with each device.
MAKING CONNECTIONS 35 ENGLISH ENG Satellite dish Connection Antenna Connection (Only satellite models) IN 13 / 18 V IN (*Not Provided) 700mA Max LNB IN Satellite ANTENNA / CABLE (*Not Provided) Wall Antenna Socket Satellite Dish Connect the TV to a wall antenna socket with an RF FDEOH NOTE y Use a signal splitter to use more than 2 TVs. y If the image quality is poor, install a signal amplifier properly to improve the image quality.
MAKING CONNECTIONS 4 (MHL) (4K@60Hz) / DVI IN 3 (10Bit) 2 (ARC) DVD / Blu-Ray / HD Cable Box / HD STB / PC 1 (HDCP 2.2) ENGLISH ENG HDMI Connection 1) HDMI specifications may be different for each input port, so make sure to check the device specifications before connecting. 2) The HDMI IN 3 port is especially suitable for the specifications to enjoy UHD Video (4:4:4, 4:2:2) of 4K @ 50/60 Hz. However, video or audio may not be supported depending on the specifications of the external equipment.
MAKING CONNECTIONS DVI to HDMI Connection 37 (4K@60Hz) / DVI IN 3 (10Bit) 4 (MHL) ENGLISH ENG Component Connection 1 (HDCP 2.2) AV2 VIDEO COMPONENT AUDIO PR PB Y 2 (ARC) IN IN AV2 AV2 YELLOW (Use the composite gender cable provided.) GREEN (Use the component gender cable provided.
MAKING CONNECTIONS 4 (MHL) COMPONENT AUDIO PR PB Y AV2 YELLOW (Use the composite gender cable provided.) MHL passive cable (*Not Provided) YELLOW WHITE RED YELLOW WHITE RED (*Not Provided) RED WHITE YELLOW VIDEO 3(10Bit) (4K@60Hz) / DVI/ DVI IN IN VIDEO IN 2(ARC) 2 AV2 11(HDCP 2.2) ENGLISH ENG MHL Connection Composite Connection L (MONO) AUDIO R VCR / DVD / Blu-Ray / HD Cable Box Transmits analogue video and audio signals from an external device to the TV.
MAKING CONNECTIONS Headphone Connection OUT OUT OPTICAL DIGITAL AUDIO Ext.SPEAKER / H/P (*Not Provided) (*Not Provided) Transmits the headphone signal from the TV to an external device. Connect the external device and the TV with the headphone as shown. NOTE OPTICAL AUDIO IN Digital Audio System You may use an external audio system instead of the built-in speaker. Digital optical audio Connection Transmits a digital audio signal from the TV to an external device.
MAKING CONNECTIONS 2 USB IN 3 ▼ PCMCIA CARD SLOT ▼ CI module Connection HDD IN 1(USB 3.0 IN) (*Not Provided) HDD (*Not Provided) HUB (*Not Provided) USB (*Not Provided) &RQQHFW D 86% VWRUDJH GHYLFH VXFK DV D 86% ÀDVK memory, external hard drive or a USB memory card reader to the TV and access the SmartShare menu to XVH YDULRXV PXOWLPHGLD ¿OHV ▼ PCMCIA CARD SLOT ▼ ENGLISH ENG USB Connection NOTE y Some USB Hubs may not work.
MAKING CONNECTIONS ENGLISH ENG Euro Scart Connection IN / OUT (RGB) (Use the Scart gender cable provided - Depending on model) AV1 (RGB) AV1 (*Not Provided) Transmits the video and audio signals from an external device to the TV set. Connect the external device and the TV set with the euro scart cable (or Scart gender cable) as shown.
REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. or CAUTION y Do not mix old and new batteries, as this may damage the remote control.
REMOTE CONTROL 43 (Depending on model) SETTINGS INFO SUBTITLE Q.MENU GUIDE 0 [ 1 .@ 2 abc 3 def 4 ghi 5 jkl 6 mno 7 pqrs 8 tuv 9 wxyz Q.VIEW FAV MUTE 1 RECENT LIVE MENU TEXT T.OPT EXIT AD 2 REC/ GUIDE Shows programme guide. (Space) Opens an empty space on the screen keyboard. Q.VIEW Returns to the previously viewed programme. FAV Accesses your favourite programme list. Uses for viewing 3D video. (Depending on model) MUTE Mutes all sounds. + - Adjusts the volume level.
MAGIC REMOTE FUNCTIONS ENGLISH ENG MAGIC REMOTE FUNCTIONS When the message “Magic Remote battery is low. Change the battery.” is displayed, replace the battery. To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching and ends to the label inside the compartment, and close the battery cover. Be sure to point the remote control toward the remote control sensor on the TV. To remove the batteries, perform the installation actions in reverse.
MAGIC REMOTE FUNCTIONS Registering Magic Remote How to register the Magic Remote (Wheel) 7R XVH WKH 0DJLF 5HPRWH ¿UVW SDLU LW with your TV. 1 Put batteries into the Magic Remote and turn the TV on. 2 Point the Magic Remote at your TV and press the Wheel (OK) on the remote control. * If the TV fails to register the Magic Remote, try again after turning the TV off and back on.
MAGIC REMOTE FUNCTIONS ENGLISH ENG Precautions to Take when Using the Magic Remote y Use the Magic Remote within the maximum communication distance (10 m). Using the Magic Remote beyond this distance, or with an object obstructing it, may cause a communication failure. y A communication failure may occur due to nearby devices. Electrical devices such as a microwave oven or wireless LAN product may cause interference, as these use the same bandwidth (2.4 GHz) as the Magic Remote.
USING THE USER GUIDE / MAINTENANCE User Guide allows you to more easily access the detailed TV information. 1 Press the (Home) button to access the Home menu. 2 Select User Guide and press Wheel(OK). MAINTENANCE Cleaning your TV Clean your TV regularly to keep the best performance and to extend the product lifespan. CAUTION y Make sure to turn the power off and disconnect the power cord and all other cables first.
TROUBLESHOOTING / SPECIFICATIONS ENGLISH ENG TROUBLESHOOTING Problem Solution Cannot control the TV with the remote control. No image display and no sound is produced. The TV turns off suddenly. When connecting to the PC (HDMI/DVI), ‘No signal’ or ‘Invalid Format’ is displayed. y Check the remote control sensor on the product and try again. y Check if there is any obstacle between the product and the remote control. y Check if the batteries are still working and properly installed ( to , to ).
SPECIFICATIONS 49 (Only UB98**) IEEE 802.11a/b/g/n/ac 2400 to 2483.5 MHz 5150 to 5250 MHz 5725 to 5850 MHz (for Non EU) Frequency Range 802.11a: 14.5 dBm 802.11b: 16 dBm 802.11g: 13.5 dBm 802.11n - 2.4GHz: 14 dBm 802.11n - 5GHz: 15.5 dBm 802.11ac - 5GHz : 16 dBm Output Power (Max.) y Because band channel used by the country could be different, the user can not change or adjust the operating frequency and this product is set for the regional frequency table.
SPECIFICATIONS 3URGXFW VSHFL¿FDWLRQV PD\ EH FKDQJHG ZLWKRXW SULRU QRWLFH GXH WR XSJUDGH RI SURGXFW IXQFWLRQV ENGLISH ENG 49UB85** MODELS Dimensions (W x H x D) 49UB850V-ZA 49UB850V-ZD With stand (mm) 1093 x 689 x 242 1093 x 681 x 237 Without stand (mm) 1093 x 646 x 38.2 1093 x 646 x 38.2 18.2 18.5 With stand (kg) Weight Without stand (kg) 17.5 17.
SPECIFICATIONS Dimensions (W x H x D) 55UB950V-ZA 55UB950V-ZB With stand (mm) 1232 x 782 x 260 1232 x 780 x 242 Without stand (mm) 1232 x 734 x 37 1232 x 734 x 37 With stand (kg) 23.8 24.2 Without stand (kg) 23.1 23.
SPECIFICATIONS ENGLISH ENG 55UC97** 65UC97** MODELS Dimensions (W x H x D) With stand (mm) Without stand (mm) 55UC970V-ZA 65UC970V-ZA 1238.7 X 757.5 X 289.0 1456.9 X 888.0 X 316.4 1238.7 X 730 X 72.1 1456.9 X 853.2 X 71.5 With stand (kg) 27.7 34.6 Without stand (kg) 26.2 32.9 Power requirement AC 100-240 V ~ 50/60 Hz AC 100-240 V ~ 50/60 Hz Power consumption 240W 260W Weight CI Module Size (W x H x D) 100.0 mm x 55.0 mm x 5.
Please contact LG First. If you have any inquiries or comments, please contact LG customer information centre. Customer Information Centre Country Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service.