OWNER’S MANUAL LED TV* * LG LED TVs are LCD TVs with LED backlighting. Click! User Guide Please read this manual carefully before operating your set and retain it for future reference. UB85** UB93** UB95** UB98** UC97** UC9* *MFL68066604* UG88** www.lg.
A-2 TABLE OF CONTENTS TABLE OF CONTENTS A-3 SETTING UP THE TV A-3 Attaching the stand A-9 Tidying cables A-11 Assembling the AV cover A-12 MAKING CONNECTIONS A-12 A-15 A-16 A-21 A-22 A-24 A-26 A-27 A-29 A-29 A-32 A-34 A-36 A-38 Antenna Connection Satellite dish Connection HDMI Connection - ARC (Audio Return Channel) DVI to HDMI Connection Component Connection Composite Connection MHL Connection Audio Connection - Digital optical audio Connection Headphone Connection USB Connection CI module Connection E
SETTING UP THE TV SETTING UP THE TV A-3 2 Image shown may differ from your TV. Attaching the stand UB85**-ZA, UB93**, UB95**-ZA 1 Stand Body (L) 1 Stand Body (R) 2 Stand Base 1 Attach the stand to the TV using the upper mounting hole on the back of the TV. 2 Attach the stand to the TV using the lower connection on the back of the TV. M4 x L20 4EA 3 NOTE yy Be sure to check the Stand Body (L), (R), when installing on the stand base.
A-4 SETTING UP THE TV UB85**-ZD, UB95**-ZB 3 1 Stand Body (R) Stand Body (L) Stand Base 1 Attach the stand to the TV using the upper mounting hole on the back of the TV. 2 Attach the stand to the TV using the lower connection on the back of the TV. 2 4 4EA M4 x L10 NOTE yy Be sure to check the Stand Body (L), (R), when installing on the stand base.
SETTING UP THE TV 65/79/84UB98** A-5 3 1 (Only 65/79UB98**) 1 2 Wrench Stand Base 4EA 2 M6 x L47 (Only 65UB98**) 1 M6 x L52 (Only 79UB98**) 2 (Only 84UB98**) 1 2 Wrench 4EA M6 x L52 1 4EA (Insulation Holder) 2
A-6 SETTING UP THE TV CAUTION y Make sure that the screws are inserted correctly and fastened securely. (If they are not fastened securely enough, the TV may tilt forward after being installed.) 98UB98** 1 Wrench 1 2 1 2 Mold M6 x L47 6EA NOTE y The stand screws are already attached at the back of the TV. Please use these attached screw to assemble the TV and stand.
SETTING UP THE TV UC97** 2 A-7 1 2 1 Stand Body (L) Stand Body (R) Stand Base Stand Base 1 2 M4 x L10 4EA 3 Wrench 2 2 3 1 When assembling the stand, lay the front screen protective package included in the product box on a table or flat surface and then place the TV screen face down on the protective package. 2 Attach the stand to the TV using the upper mounting hole on the back of the TV. 3 Attach the stand to the TV using the lower connection on the back of the TV.
A-8 SETTING UP THE TV 3 2 2 3 1 1 M4 x L20 4EA * Use at1least two people to attach the stand to the TV. 1 When assembling the stand, lay the front screen protective package included in the product box on a table or flat surface and then place the TV screen face down on the protective package. 2 Attach the stand to the TV using the upper mounting hole on the back of the TV. 3 Attach the stand to the TV using the lower connection on the back of the TV.
SETTING UP THE TV CAUTION yy When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. (Only UB85**, UB93**, UB95**, UB98**) yy Make sure that the screws are inserted correctly and fastened securely. (If they are not fastened securely enough, the TV may tilt forward after being installed.) Do not use too much force and over tighten the screws; otherwise screw may be damaged and not tighten correctly.
A-10 SETTING UP THE TV (Only UC97**) 1 Gather and bind the cables with the Cable Holder.
SETTING UP THE TV 1 Fix the Cable Management firmly to the TV. Assembling the AV cover (Only UC9*) (Only 98UB98**) A-11 1 Insert the cover holder attached to the AV port cover into the hole of the main body of the product as illustrated. 2 Attach the port cover onto the AV port part. (The cover remains attached through the use of a magnet.
A-12 SETTING UP THE TV / MAKING CONNECTIONS (Only UC9*) 1 Insert the cover holder attached to the AV port cover into the hole of the main body of the product as illustrated. 2 Attach the AV port cover by inserting it into the left hole of the port. (The cover remains attached through the use of a magnet.) MAKING CONNECTIONS This section on MAKING CONNECTIONS mainly uses diagrams for the UB85** models.
MAKING CONNECTIONS Deutsch Schließen Sie das TV-Gerät mit einem HF-Kabel (75 Ω) an eine Wandantennenbuchse an. HINWEIS yy Bei Verwendung von mehr als 2 TV-Geräten verwenden Sie einen Signalsplitter. yy Ist das Bild schlecht, installieren Sie einen Signalverstärker, um die Bildqualität zu verbessern. yy Wenn die Bildqualität bei angeschlossener Antenne schlecht ist, richten Sie die Antenne richtig aus. yy Antennenkabel und Wandler sind nicht im Lieferumfang enthalten.
A-14 MAKING CONNECTIONS Português Ligue a TV a uma tomada de antena de parede com um cabo RF (75 Ω). NOTA yy Utilize um separador de sinal se quiser utilizar mais de 2 TVs. yy Se a qualidade de imagem for fraca, instale um amplificador de sinal para melhorar a qualidade de imagem. yy Se a qualidade de imagem for fraca mesmo que tenha uma antena ligada, tente orientar a antena para a direcção correcta. yy O cabo da antena e o conversor não são fornecidos.
MAKING CONNECTIONS Satellite dish Connection A-15 Nederlands Sluit de TV met behulp van een RF-satellietkabel (75 Ω) aan op een satellietschotel. (Only satellite models) Ελληνικά Συνδέστε την τηλεόραση σε μια δορυφορική κεραία, μέσω μιας δορυφορικής υποδοχής με δορυφορικό καλώδιο (75 Ω). IN 13 / 18 V 700mA Max LNB IN Satellite (*Not Provided) Satellite Dish English Connect the TV to a satellite dish to a satellite socket with a satellite RF cable (75 Ω).
A-16 MAKING CONNECTIONS HDMI Connection 2 (ARC) 1 (HDCP 2.2) DVD / Blu-Ray / HD Cable Box / HD STB / PC (4K@60Hz) / DVI IN 3 (10Bit) 4 (MHL) English Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown. NOTE yy It is recommended to use the TV with the HDMI connection for the best image quality. yy Use the latest High Speed HDMI™ Cable with CEC (Customer Electronics Control) function.
MAKING CONNECTIONS Deutsch Français Überträgt digitale Video- und Audiosignale von einem externen Gerät an das TV-Gerät. Verbinden Sie das externe Gerät, wie in der folgenden Abbildung gezeigt, mithilfe des HDMI-Kabels mit dem TV-Gerät. HINWEIS Permet de transmettre les signaux vidéo et audio numériques d’un périphérique externe vers la TV. Connectez le périphérique externe et la TV avec le câble HDMI comme indiqué sur l’illustration suivante.
A-18 MAKING CONNECTIONS Italiano Español Il segnale digitale audio e video viene trasmesso da un dispositivo esterno al televisore. Collegare il dispositivo esterno e il televisore mediante il cavo HDMI come mostrato nell’illustrazione di seguito. NOTA yy Si consiglia di utilizzare il televisore con il collegamento HDMI per ottenere la migliore qualità delle immagini. yy Utilizzare un cavo HDMI™ ad alta velocità dotato dei requisiti più recenti con funzione CEC (Customer Electronics Control).
MAKING CONNECTIONS Português Nederlands Transmite os sinais digitais de vídeo e áudio de um dispositivo externo para a TV. Ligue o dispositivo externo à TV com o cabo HDMI, conforme demonstrado na ilustração. NOTA yy Recomenda-se a utilização da TV com a ligação HDMI para uma melhor qualidade de imagem. yy Utilize o mais recente cabo HDMI™ de alta velocidade com função CEC (Customer Electronics Control). yy Os cabos HDMI™ de alta velocidade foram testados para executar um sinal HD até 1080p e superior.
A-20 MAKING CONNECTIONS Slovenščina Ελληνικά Μεταδίδει τα ψηφιακά σήματα εικόνας και ήχου από μια εξωτερική συσκευή στην τηλεόραση. Συνδέστε την εξωτερική συσκευή και την τηλεόραση με το καλώδιο HDMI, όπως φαίνεται στην παρακάτω εικόνα. OPOMBA ΣΗΜΕΙΩΣΗ yy Για τη βέλτιστη ποιότητα εικόνας, χρησιμοποιήστε την τηλεόραση με σύνδεση HDMI. yy Χρησιμοποιήστε το καλώδιο HDMI™ υψηλής ταχύτητας με λειτουργία CEC (Customer Electronics Control).
MAKING CONNECTIONS ARC (Audio Return Channel) English yy An external audio device that supports SIMPLINK and ARC must be connected using HDMI(4K @ 60 Hz)/DVI IN 2 (ARC) port. yy When connected with a high-speed HDMI cable, the external audio device that supports ARC outputs optical SPDIF without additional optical audio cable and supports the SIMPLINK function. Deutsch yy Ein externes Audiogerät, das SIMPLINK und ARC unterstützt, muss über den HDMI(4K @ 60 Hz)/DVI IN 2 (ARC) angeschlossen werden.
A-22 MAKING CONNECTIONS DVI to HDMI Connection English 4 (MHL) Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown. To transmit an audio signal, connect an audio cable. (4K@60Hz) / DVI IN 3 (10Bit) Deutsch Überträgt digitale Videosignale von einem externen Gerät an das TV-Gerät. Verbinden Sie das externe Gerät, wie in der folgenden Abbildung gezeigt, mithilfe des DVI-HDMI-Kabels mit dem TV-Gerät.
MAKING CONNECTIONS Italiano A-23 Nederlands Il segnale digitale video viene trasmesso da un dispositivo esterno al televisore. Collegare il dispositivo esterno e il televisore mediante il cavo DVI-HDMI come mostrato nell’illustrazione di seguito. Per trasmettere un segnale audio, collegare un cavo audio. NOTA yy A seconda della scheda grafica in uso, la modalità DOS potrebbe non funzionare se si utilizza un cavo da HDMI a DVI.
A-24 MAKING CONNECTIONS Component Connection English Transmits analogue video and audio signals from an external device to the TV. Connect the external device and the TV with a component cable(or component gender cable) as shown. NOTE IN AV2 VIDEO yy If cables are not installed correctly, it could cause this image to display in black and white or with distorted colours. COMPONENT AUDIO PR PB Y Deutsch Überträgt analoge Video- und Audiosignale von einem externen Gerät an das TV-Gerät.
MAKING CONNECTIONS Español Transmite las señales de audio y vídeo analógico de un dispositivo externo a la TV. Use un cable de componentes (o de género compuesto) para conectar el dispositivo externo a la TV como se indica. NOTA yy Si los cables no se instalan correctamente, puede que la imagen se visualice en blanco y negro o con los colores distorsionados. Português Transmite sinais analógicos de vídeo e áudio de um dispositivo externo para a TV.
A-26 MAKING CONNECTIONS Composite Connection Deutsch Überträgt analoge Video- und Audiosignale von einem externen Gerät an das TV-Gerät. Verbinden Sie das externe Gerät wie in der Abbildung gezeigt über ein Composite-Kabel mit dem TV-Gerät. Français AV2 VIDEO IN COMPONENT AUDIO PR PB Y Permet de transmettre les signaux audio et vidéo analogiques d’un périphérique externe vers la TV.
MAKING CONNECTIONS MHL Connection A-27 Deutsch 11(HDCP 2.2) 2(ARC) 2 3(10Bit) (4K@60Hz) / DVI/ DVI IN IN 4 (MHL) Mobile High-definition Link (MHL) ist eine digitale Schnittstelle, welche audiovisuelle Signale vom Mobiltelefon an ein TV-Gerät überträgt. MHL passive cable (*Not Provided) HINWEIS yy Verbinden Sie das Mobiltelefon mit dem HDMI(4K @ 60 Hz)/DVI IN 4(MHL) Anschluss, um den Bildschirm des Telefons auf dem Fernsehgerät anzuzeigen.
A-28 MAKING CONNECTIONS Italiano Português Mobile High-definition Link (MHL) è un’interfaccia per la trasmissione di segnali audiovisivi digitali dai cellulari ai TV. NOTA yy Collegare il cellulare alla porta HDMI(4K @ 60 Hz)/DVI IN 4(MHL) per visualizzare lo schermo del telefono sul TV. yy È necessario un cavo passivo MHL per collegare il TV a un cellulare. yy Questa funzione è disponibile soltanto sui telefoni che supportano l’interfaccia MHL.
MAKING CONNECTIONS Ελληνικά A-29 Audio Connection Το MHL (Mobile High-definition Link) είναι μια διασύνδεση για τη μετάδοση ψηφιακών οπτικοακουστικών σημάτων από κινητά τηλέφωνα προς τηλεοράσεις. ΣΗΜΕΙΩΣΗ yy Συνδέστε το κινητό τηλέφωνο στη θύρα HDMI(4K @ 60 Hz)/DVI IN 4(MHL) για προβολή της οθόνης του τηλεφώνου στην τηλεόραση. yy Το παθητικό καλώδιο MHL είναι απαραίτητο για τη σύνδεση της τηλεόρασης με κινητό τηλέφωνο. yy Η λειτουργία αυτή υποστηρίζεται μόνο για τηλέφωνα με δυνατότητα MHL.
A-30 MAKING CONNECTIONS Deutsch Italiano Sie können anstelle der integrierten Lautsprecher ein optionales externes Audiosystem verwenden. È possibile utilizzare un sistema audio esterno opzionale al posto dell’altoparlante integrato. Anschluss über ein digitales optisches Audiokabel Collegamento audio ottico digitale Überträgt ein digitales Audiosignal vom TV-Gerät an ein externes Gerät.
MAKING CONNECTIONS Português Pode utilizar um sistema de áudio externo opcional em vez das colunas incorporadas. Ligação de áudio óptica digital Transmite um sinal áudio digital da TV para um dispositivo externo. Ligue o dispositivo externo à TV com o cabo de áudio óptico, conforme demonstrado na ilustração. NOTA yy Não olhe para a porta de saída óptica. Se olhar para o feixe laser, poderá prejudicar a visão. yy O áudio com a função ACP (protecção áudio anticópia) poderá bloquear a saída áudio digital.
A-32 MAKING CONNECTIONS Headphone Connection Deutsch Überträgt das Kopfhörersignal vom TV-Gerät an ein externes Gerät. Verbinden Sie die Kopfhörer, wie in der folgenden Abbildung gezeigt, mit dem TV-Gerät. HINWEIS OUT Ext.SPEAKER / H/P (*Not Provided) yy Bei angeschlossenem Kopfhörer sind die AUDIOMenüpunkte deaktiviert. yy Der optische digitale Audioausgang ist nicht verfügbar, solange Kopfhörer angeschlossen sind. yy Kopfhörerimpedanz: 16 Ω yy Max.
MAKING CONNECTIONS Español Transmite la señal de auriculares de la TV a un dispositivo externo. Use el cable de los auriculares para conectar el dispositivo externo a la TV, tal y como se muestra en la siguiente ilustración. NOTA yy Al conectar los auriculares se desactivarán las opciones del menú AUDIO. yy La salida óptica de audio digital no estará disponible al conectar unos auriculares. yy Impedancia del auricular: 16 Ω yy Salida de audio máxima de los auriculares: de 0,627 mW a 1,334 mW.
A-34 MAKING CONNECTIONS USB Connection Deutsch 3 Verbinden Sie ein USB-Speichergerät, z. B. USBFlash-Speicher, eine externe Festplatte oder einen USB-Kartenleser für Speicherkarten mit dem TV-Gerät, und greifen Sie auf das Menü „Smart Share“ zu, um verschiedene Multimediadateien zu verwenden. USB IN HINWEIS HDD IN 1(USB 3.0 IN) 2 yy Einige USB-Hubs funktionieren vielleicht nicht.
MAKING CONNECTIONS Italiano A-35 Português Collegare una periferica di archiviazione USB, ad esempio una memoria flash USB, un hard disk esterno, o un lettore di schede di memoria USB al televisore e accedere al menu Smart Share per utilizzare diversi file multimediali. NOTA yy Alcuni hub USB potrebbero non funzionare. Se una periferica USB collegata tramite un hub USB non viene rilevata, collegarla direttamente alla porta USB IN della TV.
A-36 MAKING CONNECTIONS Ελληνικά CI module Connection ▼ PCMCIA CARD SLOT ▼ Συνδέστε μια συσκευή αποθήκευσης USB, όπως μια μνήμη flash USB, έναν εξωτερικό σκληρό δίσκο ή μια συσκευή ανάγνωσης καρτών μνήμης USB, στην τηλεόραση και μεταβείτε στο μενού Smart Share για τη χρήση διάφορων αρχείων πολυμέσων. ΣΗΜΕΙΩΣΗ yy Ορισμένοι διανομείς USB ενδέχεται να μην λειτουργούν.
MAKING CONNECTIONS Deutsch Zeigen Sie verschlüsselte Dienste (Bezahldienste) im digitalen TV-Modus an. Diese Funktion ist in einigen Ländern nicht verfügbar. HINWEIS yy Überprüfen Sie, ob das CI-Modul richtig herum in den PCMCIA-Kartensteckplatz gesteckt wurde. Falls das Modul nicht korrekt eingesetzt wurde, können TV-Gerät und PCMCIA-Kartensteckplatz beschädigt werden.
A-38 MAKING CONNECTIONS Ελληνικά Euro Scart Connection Παρακολουθήστε κρυπτογραφημένες (συνδρομητικές) υπηρεσίες στη λειτουργία ψηφιακής τηλεόρασης. Αυτή η λειτουργία δεν είναι διαθέσιμη σε όλες τις χώρες. ΣΗΜΕΙΩΣΗ yy Ελέγξτε αν η μονάδα CI έχει τοποθετηθεί στην εσοχή κάρτας PCMCIA με τη σωστή κατεύθυνση. Αν δεν έχει τοποθετηθεί σωστά, μπορεί να προκαλέσει ζημιά στην τηλεόραση και στην υποδοχή κάρτας PCMCIA.
MAKING CONNECTIONS English A-39 Français Transmits the video and audio signals from an external device to the TV set. Connect the external device and the TV set with the euro scart cable (or Scart gender cable) as shown. Output Type Current input mode Digital TV Type de sortie AV1 (TV Out1) Digital TV Analogue TV, AV Component Transmet les signaux audio et vidéo d’un appareil externe au téléviseur.
A-40 MAKING CONNECTIONS Español Nederlands Transmite las señales de audio y vídeo de un dipositivo externo a la TV. Use el cable euroconector (o de género SCART) para conectar el dispositivo externo a la TV como se muestra. U kunt de video- en audiosignalen vanaf een etern apparaat naar de TV zenden. Sluit het externe apparaat en de TV op elkaar aan met behulp van de Scart-kabel (mannetje/vrouwtje), zoals in de afbeelding.
MAKING CONNECTIONS Slovenščina English Prenaša video in avdio signale iz zunanje naprave na televizor. Povežite zunanjo napravo in televizor s kablom Euro Scart (ali pretvorniškim kablom Euro Scart), kot je prikazano. Vrsta izhoda Trenutni način vhoda Digitalna TV AV1 (TV-izhod1) Digitalna TV Analogna TV, AV Komponentni A-41 Analogna TV HDMI 1 TV-izhod : Izhod za analogne in digitalne televizijske signale. OPOMBA yy Kabel Euro Scart mora biti signalno zaščiten.
A-42 MAKING CONNECTIONS Deutsch Verbinden Sie mehrere externe Geräte mit dem TVGerät, und wechseln Sie die Eingangsmodi, um ein externes Gerät auszuwählen. Weitere Informationen zum Anschluss von externen Geräten entnehmen Sie bitte dem Handbuch des jeweiligen Gerätes. Verfügbare externe Geräte sind : HD-Receiver, DVD-Player, Videorekorder, Audiosysteme, USBSpeichergeräte, PCs, Spielkonsolen und weitere externe Geräte.
MAKING CONNECTIONS Italiano A-43 Español Collegare diversi dispositivi esterni al televisore e modificare la modalità di ingresso per selezionare un dispositivo esterno. Per ulteriori informazioni sul collegamento di un dispositivo esterno, consultare il manuale fornito in dotazione con ciascun dispositivo. È possibile collegare i seguenti dispositivi esterni : ricevitori HD, lettori DVD, VCR, sistemi audio, periferiche di archiviazione USB, PC, console per videogiochi e altri dispositivi esterni.
A-44 MAKING CONNECTIONS Português Ligue vários dispositivos externos à TV e mude os modos de entrada para seleccionar um dispositivo externo. Para mais informações sobre a ligação de dispositivos externos, consulte o manual fornecido com cada dispositivo. Os dispositivos externos disponíveis são : receptores HD, leitores de DVD, videogravadores, sistemas de áudio, dispositivos de armazenamento USB, PC, dispositivos de jogos e outros dispositivos externos.
MAKING CONNECTIONS Ελληνικά Για να επιλέξετε μια εξωτερική συσκευή, συνδέστε διάφορες εξωτερικές συσκευές στην τηλεόραση και αλλάξτε λειτουργίες εισόδου. Για περισσότερες πληροφορίες σχετικά με τη σύνδεση εξωτερικών συσκευών, ανατρέξτε στο εγχειρίδιο που παρέχεται με κάθε συσκευή. Οι διαθέσιμες εξωτερικές συσκευές περιλαμβάνουν δέκτες HD, συσκευές αναπαραγωγής DVD, VCR, ηχοσυστήματα, συσκευές αποθήκευσης USB, υπολογιστές, παιχνιδομηχανές και άλλες εξωτερικές συσκευές.
OWNER’S MANUAL LED TV* * LG LED TVs are LCD TVs with LED backlighting. Click! User Guide Please read this manual carefully before operating your set and retain it for future reference. www.lg.
2 TABLE OF CONTENTS ENGLISH ENG TABLE OF CONTENTS 3 LICENSES 3 OPEN SOURCE SOFTWARE NOTICE 30 MAGIC REMOTE FUNCTIONS 31 Registering Magic Remote 31 How to use Magic Remote 32 Precautions to Take when Using the Magic Remote 3 EXTERNAL CONTROL DEVICE SETUP 4 SAFETY INSTRUCTIONS 11 - Viewing 3D Imaging (Only 3D models) 13 INSTALLATION PROCEDURE 13 ASSEMBLING AND PREPARING 13 Unpacking 17 Separate purchase 18 Parts and buttons 21 - Using the joystick button 22 Lifting and movin
LICENSES / OPEN SOURCE SOFTWARE NOTICE / EXTERNAL CONTROL DEVICE SETUP 3 Supported licenses may differ by model. For more information about licenses, visit www.lg.com. OPEN SOURCE SOFTWARE NOTICE To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
4 SAFETY INSTRUCTIONS ENGLISH ENG SAFETY INSTRUCTIONS Please read these safety precautions carefully before using the product.
SAFETY INSTRUCTIONS yy When mounting TV onto wall make sure to neatly install and isolate cabling from rear of TV as to not create possibility of electric shock/fire hazard. yy Do not plug too many electrical devices into a single multiple electrical outlet. Otherwise, this may result in fire due to over-heating. yy Do not drop the product or let it fall over when connecting external devices. Otherwise, this may result in injury or damage to the product.
6 SAFETY INSTRUCTIONS ENGLISH ENG yy Do not spray water on the product or scrub with an inflammable substance (thinner or benzene). Fire or electric shock accident can occur. yy Do not allow any impact, shock or any objects to fall into the unit, and do not drop anything onto the screen. You may be injured or the product can be damaged. yy Never touch this product or antenna during a thunder or lighting storm. You may be electrocuted.
SAFETY INSTRUCTIONS yy Install the product where no radio wave occurs. yy There should be enough distance between an outside antenna and power lines to keep the former from touching the latter even when the antenna falls. This may cause an electric shock. yy Do not install the product on places such as unstable shelves or inclined surfaces. Also avoid places where there is vibration or where the product cannot be fully supported.
8 SAFETY INSTRUCTIONS ENGLISH ENG yy Make sure there are no objects between the remote control and its sensor. yy Signal from Remote Control can be interrupted due to external/internal lighting eg Sunlight, fluorescent lighting. If this occurs turn off lighting or darken viewing area. yy When connecting external devices such as video game consoles, make sure the connecting cables are long enough. Otherwise, the product may fall over, which may cause injury or damage the product.
SAFETY INSTRUCTIONS yy When cleaning the product and its components, unplug the power first and wipe it with a soft cloth. Applying excessive force may cause scratches or discolouration. Do not spray with water or wipe with a wet cloth. Never use glass cleaner, car or industrial shiner, abrasives or wax, benzene, alcohol etc., which can damage the product and its panel. Otherwise, this may result in fire, electric shock or product damage (deformation, corrosion or breakage).
10 SAFETY INSTRUCTIONS ENGLISH ENG yy You may find different brightness and colour of the panel depending on your viewing position(left/right/top/down). This phenomenon occurs due to the characteristic of the panel. It is not related with the product performance, and it is not malfunction. yy Displaying a still image (e.g.
SAFETY INSTRUCTIONS 11 WARNING Viewing Environment yy Viewing Time -- When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long period of time may cause headache, dizziness, fatigue or eye strain. Those that have a photosensitive seizure or chronic illness yy Some users may experience a seizure or other abnormal symptoms when they are exposed to a flashing light or particular pattern from 3D contents.
12 SAFETY INSTRUCTIONS ENGLISH ENG CAUTION Viewing Environment yy Viewing Distance - Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you feel discomfort in viewing 3D contents, move further away from the TV. Viewing Age yy Infants/Children -- Usage/ Viewing 3D contents for children under the age of 6 are prohibited.
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING 13 INSTALLATION PROCEDURE 1 2 3 4 Open the package and make sure all the accessories are included. Attach the stand to the TV set. Connect an external device to the TV set. Make sure the network connection is available. You can use the TV network functions only when the network connection is made. * If the TV is turned on for the first time after it was shipped from the factory, initialization of the TV may take a few minutes.
14 ASSEMBLING AND PREPARING ENGLISH ENG NOTE How to use the ferrite core (Depending on model) yy Use the ferrite core to reduce the electromagnetic interference in the LAN cable. Wind the LAN cable once on the ferrite core. Place the ferrite core close to the TV.
ASSEMBLING AND PREPARING 15 ENGLISH ENG ENERGY AV MODE INPUT TV SAVING 1 2 3 4 5 6 7 8 9 0 FLASHBK LIST MARK FAV VOL 3D CH P A G E MUTE MENU INFO Q.MENU Tag On ENTER BACK EXIT L/R SELECT FREEZE RATIO Remote Control, Batteries (AAA) (Depending on model) The remote control will not be included for all sales market. (See p. 28, 29) Magic remote, batteries (AA) (Only UB85**, UB93**, UB95**, UB98**, UC97**, UC9*, UG88**) (See p.
1 2 16 ASSEMBLING AND PREPARING ENGLISH ENG Stand Body / Stand Base (Only UC97**) (See p. A-7, A-8) Stand Body / Stand Base (Only UG88**) (See p. A-8) Stand Screws 8EA, M4 x L20 (Only UB85**-ZA, UB93**, UB95**-ZA) 4EA, M4 x L20 (Only UB85**-ZD, UB95**-ZB, UC97**) (See p. A-3, A-4, A-8) Stand Screws 4EA, M4 x L10 (Only UB85**-ZD, UB95**-ZB, UC97**) 2EA, M4 X L10 (Only UG88**) (See p. A-4, A-7, A-8) Stand Screws 4EA, M6 x L47 (Only 65UB98**) (See p.
ASSEMBLING AND PREPARING 17 ENGLISH ENG AV Port Cover (Only UC9*) (See p. A-12) Separate purchase Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items. These devices only work with certain models.
18 ASSEMBLING AND PREPARING ENGLISH ENG Parts and buttons B type : UB85**-ZD A type : UB85**-ZA Screen Screen Speakers Speakers Remote control and Intelligent1 sensors Power Indicator Joystick Button2 Remote control and Intelligent1 sensors Power Indicator D type : UB95**-ZB C type : UB93**, UB95**-ZA Screen Screen Speakers Speakers Remote control and Intelligent1 sensors LG Logo light Joystick Button2 Joystick Button3 Remote control and Intelligent1 sensors LG Logo light Joystick Butto
ASSEMBLING AND PREPARING F type : 84UB98** E type : 65/79UB98** Screen Screen Speakers Speakers Speakers(Only 79UB98**) Speakers Joystick Button 2 G type : 98UB98** Built-in camera Screen Remote control and Intelligent1 sensors LG Logo light Joystick Button3 H type : UC97** Screen Speakers Remote control and Intelligent1 sensors LG Logo light Sliding Speaker Joystick Button3 Remote control and Intelligent1 sensors LG Logo light Joystick Button2 ENGLISH ENG Built-in camera Built-in camer
20 ASSEMBLING AND PREPARING I Type : UC9* ENGLISH ENG Built-in Camera J Type : UG88** Screen Screen Speakers Speakers Remote control and Intelligent1 sensors Power Indicator Joystick Button3 Remote control and Intelligent1 sensors LG Logo light Joystick Button2 CAUTION yy Do NOT place any objects or body parts in area between TV Screen and Speaker Stand assembly. It could cause personal Injury or damage to product.
ASSEMBLING AND PREPARING 21 Using the joystick button Basic Functions Power On When the TV is turned off, place your finger on the joystick button and press it once and release it. Power Off When the TV is turned on, place your finger on the joystick button and press it once for a few seconds and release it. Volume Control If you place your finger over the joystick button and move it left or right, you can adjust the volume level you want.
22 ASSEMBLING AND PREPARING ENGLISH ENG Lifting and moving the TV Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. yy When transporting a large TV, there should be at least 2 people. yy When transporting the TV by hand, hold the TV as shown in the following illustration. CAUTION yy Avoid touching the screen at all times, as this may result in damage to the screen.
ASSEMBLING AND PREPARING Using the Kensington security system Securing the TV to a wall (This feature is not available for all models.) yy Image shown may differ from your TV. The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http://www. kensington.com. Connect the Kensington security system cable between the TV and a table.
24 ASSEMBLING AND PREPARING Mounting on a wall ENGLISH ENG Wall mount bracket Attach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel. LG recommends that wall mounting be performed by a qualified professional installer. We recommend the use of LG’s wall mount bracket.
25 Sliding speaker CAUTION y Disconnect the power first, and then move or install the TV. Otherwise electric shock may occur. y If you install the TV on a ceiling or slanted wall, it may fall and result in severe injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel. y Do not over tighten the screws as this may cause damage to the TV and void your warranty. y Use the screws and wall mounts that meet the VESA standard.
26 ASSEMBLING AND PREPARING ENGLISH ENG CAUTION y When the Sliding speaker is operating (when the TV is turned on/off), ensure that children do not put their hands near the operating part of the speaker (at the bottom of the TV) and that they do not crawl into the space below the TV. - Their hands may get caught and injured due to the operation of the speaker.
ASSEMBLING AND PREPARING Preparing Built-in Camera 27 (This feature is not available for all models.) 1 Pull up the slide at the back of the TV. Angle Adjustment Lever Slide Name of Parts of Built-in Camera Protective Film Camera Lens Microphone NOTE yy Remove the protective film before using the builtin camera. 2 You can adjust the angle of the camera with the angle adjustment lever on the back of the built-in camera.
28 REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. or CAUTION yy Do not mix old and new batteries, as this may damage the remote control.
REMOTE CONTROL (Depending on model) Q.MENU 2 5 8 3 6 9 0 Q.VIEW [ 1 4 7 FAV MUTE 1 RECENT MENU TEXT T.OPT EXIT T M AD 2 REC/ AD/PIP (POWER) Turns the TV on or off. TV/RAD Selects Radio, TV and DTV programme. INPUT Changes the input source. SETTINGS Accesses the main menus. Q. MENU Accesses the quick menus. INFO Views the information of the current programme and screen. SUBTITLE Recalls your preferred subtitle in digital mode. GUIDE Shows programme guide.
30 MAGIC REMOTE FUNCTIONS ENGLISH ENG MAGIC REMOTE FUNCTIONS When the message “Magic Remote battery is low. Change the battery.” is displayed, replace the battery. To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching and ends to the label inside the compartment, and close the battery cover. Be sure to point the remote control toward the remote control sensor on the TV. To remove the batteries, perform the installation actions in reverse.
MAGIC REMOTE FUNCTIONS Registering Magic Remote BACK How HOME to register the Magic Remote (Wheel) To use the Magic Remote, first pair it with your TV. 1 Put batteries into the Magic Remote and turn the TV on. 2 Point the Magic Remote at your TV and press the Wheel (OK) on the remote control. * If the TV fails to register the Magic Remote, try again after turning the TV off and back on.
32 MAGIC REMOTE FUNCTIONS ENGLISH ENG Precautions to Take when Using the Magic Remote yy Use the Magic Remote within the maximum communication distance (10 m). Using the Magic Remote beyond this distance, or with an object obstructing it, may cause a communication failure. yy A communication failure may occur due to nearby devices. Electrical devices such as a microwave oven or wireless LAN product may cause interference, as these use the same bandwidth (2.4 GHz) as the Magic Remote.
USING THE USER GUIDE / MAINTENANCE User Guide allows you to more easily access the detailed TV information. 1 Press the (Home) button to access the Home menu. 2 Select User Guide and press Wheel(OK). BACK HOME P MY APPS NOTE yy You can also access the User Guide by pressing (User Guide) in the remote control. (Depending on model) MAINTENANCE Cleaning your TV Clean your TV regularly to keep the best performance and to extend the product lifespan.
34 TROUBLESHOOTING / SPECIFICATIONS ENGLISH ENG TROUBLESHOOTING Problem Solution Cannot control the TV with the remote control. yy Check the remote control sensor on the product and try again. yy Check if there is any obstacle between the product and the remote control. yy Check if the batteries are still working and properly installed ( to , to ). No image display and no sound is produced. yy Check if the product is turned on. yy Check if the power cord is connected to a wall outlet.
SPECIFICATIONS 35 (Only UB98**, UC9*) IEEE 802.11a/b/g/n/ac 2400 to 2483.5 MHz 5150 to 5250 MHz 5725 to 5850 MHz (for Non EU) Frequency Range 802.11a: 14.5 dBm 802.11b: 16 dBm 802.11g: 13.5 dBm 802.11n - 2.4GHz: 14 dBm 802.11n - 5GHz: 15.5 dBm 802.11ac - 5GHz : 16 dBm Output Power (Max.) yy Because band channel used by the country could be different, the user can not change or adjust the operating frequency and this product is set for the regional frequency table.
SPECIFICATIONS SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions. 49UB85** MODELS Dimensions (W x H x D) Weight 49UB850V-ZD 49UB850V-ZA 49UB856V-ZD With stand (mm) 1093 x 689 x 242 1093 x 681 x 237 Without stand (mm) 1093 x 646 x 38.2 1093 x 646 x 38.2 18.2 18.5 With stand (kg) Without stand (kg) 17.5 17.
B-2 SPECIFICATIONS MODELS 55UB95** 55UB950V-ZA 55UB950V-ZB With stand (mm) 1232 x 782 x 260 1232 x 780 x 242 Without stand (mm) 1232 x 734 x 37 1232 x 734 x 37 With stand (kg) 23.8 24.2 Without stand (kg) 23.1 23.
SPECIFICATIONS 55UC97** MODELS With stand (mm) Dimensions (W x H x D) Without stand (mm) 65UC97** 55UC970V-ZA 65UC970V-ZA 1238.7 x 757.5 x 289.0 1456.9 x 888.0 x 316.4 1238.7 x 730 x 72.1 1456.9 x 853.2 x 71.5 With stand (kg) 27.7 34.6 Without stand (kg) 26.2 32.
Please contact LG First. If you have any inquiries or comments, please contact LG customer information centre. LG Customer Information Centre Country Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service.
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.
2 KEY CODES ENGLISH ENG key CODES • This feature is not available for all models.
EXTERNAL CONTROL DEVICE SETUP 3 • Image shown may differ from your TV. Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Note: The type of control port on the TV can be different between model series. * Please be advised that not all models support this type of connectivity. * Cable is not provided.
USB USB IN IN 4 EXTERNAL CONTROL DEVICE SETUP (PC) (PC) (TV) (TV) RS-232C IN (CONTROL SERVICE) • You need to purchase the phone-jack to RS-232 cable required for &the connection between the PC and the TV, which is specified in the manual. RS-232C IN (PC) (PC) (CONTROL & SERVICE) * For other models, connect to the USB port. * The connection interface may differ from your TV.
EXTERNAL CONTROL DEVICE SETUP 5 • Baud rate : 9600 bps (UART) • Data length : 8 bits • Parity : None ENGLISH ENG Communication Parameters • Stop bit : 1 bit • Communication code : ASCII code • Use a crossed (reverse) cable. Command reference list (Depending on model) COMMAND1 COMMAND2 DATA (Hexadecimal) 01. Power* k a 00 to 01 02. Aspect Ratio k c (p.7) 03. Screen Mute k d (p.7) k e 00 to 01 k f 00 to 64 06. Contrast k g 00 to 64 07. Brightness k h 00 to 64 08.
6 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99. If [Set ID] value is selected to ‘0’, every connected set can be controlled.
EXTERNAL CONTROL DEVICE SETUP 7 01. Power (Command: k a) ►► To control Power *On or Off of the set. Transmission[k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off 01 : *Power On Ack [a][ ][Set ID][ ][OK/NG][Data][x] ►► To Show TV is Power On or *Off Transmission [k][a][ ][Set ID][ ][FF][Cr] Ack [a][ ][Set ID][ ][OK][Data][x] * Similarly, if other functions transmit ‘FF’ data based on this format, Acknowledgement feedback presents status about each function. 02.
8 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG Data Min : 00 to Max : 64 * (Depending on model) Ack [i][ ][Set ID][ ][OK/NG][Data][x] 09. Tint (Command: k j) ►► To adjust the screen tint. You can also adjust tint in the PICTURE menu. Transmission [k][j][ ][Set ID][ ][Data][Cr] Data Red : 00 to Green : 64 Ack [j][ ][Set ID][ ][OK/NG][Data][x] 10. Sharpness (Command: k k) ►► To adjust the screen sharpness. You can also adjust sharpness in the PICTURE menu.
EXTERNAL CONTROL DEVICE SETUP 0 0 5th Band 0 0 1 0 1 20(decimal) Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x] * It depends on model, and can adjust when sound mode is EQ adjustable value. 19. Energy Saving (Command: j q) ►► To reduce the power consumption of the TV. You can also adjust Energy Saving in PICTURE menu.
10 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG Number - 22 : Antenna TV (DTV) – Don’t Use Physical Channel Number - 26 : Cable TV (CADTV) - Don’t Use Physical Channel Number - 46 : Cable TV (CADTV) – Use Major Channel Number Only (One Part Channel) Two bytes are available for each major and minor channel data, but usually the low byte is used alone (high byte is 0). * Tune Command Examples: 1. Tune to the Analog cable (NTSC) channel 35.
EXTERNAL CONTROL DEVICE SETUP ►► To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data 00 : DTV 01 : CADTV 02 : Satellite DTV 10 : ATV ISDB-BS (Japan) 03 : ISDB-CS1 (Japan) 04 : ISDB-CS2 (Japan) 11 : CATV O 01 X X X 02 X X X 03 X O O [Data03][x] [t][ ][Set ID][ ][NG][Data00][x] 40 : Component1 60 : RGB 41 : Component2 90 : HDMI1 92 : HDMI3 91 : HDMI2 93 : HDMI4 26.
12 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG 27. Auto Configure (Command: j u) (Depending on model) ►► To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode.
