Full Product Manual

ENGLISHENGLISH
27MAINTENANCE
10 Turn the product body over, lift the
Kompressor lever h up, and clean the inside
of the working plate with the towel-wrapped
brush handle.
Cleaning the Filters
Clean the exhaust filter and the pre-filter when the
filter cleaning icon
K lights up.
• Clean the filters more frequently if the appliance
is used regularly or in areas with a lot of dust.
CAUTION
• Do not use the appliance without the exhaust
filter and pre-filter installed. Doing so could
result in product damage.
1 Remove the battery from the product body.
2 Rotate the exhaust filter a to the unlocked
position
b to separate it from the product
body.
3 Lift out the pre-filter c from the product
body.
4 Use the combination tool d to clean any dust
off the motor.
• Do not wash the motor with water.
5 Clean filters by brushing the dust off and
wash them in running water at least once a
month.
• To avoid odor and the malfunction of the
motor, allow the exhaust filter to dry
completely in a well-ventilated area out of
direct sunlight for at least 24 hours before
reassembling.
6 Insert the dried pre-filter and rotate the
exhaust filter to the locked position
e to
reassemble it on the product body.
us_main.book.book Page 27 Tuesday, March 31, 2020 5:28 PM