Installation Guide

ManualsBrandsLG Electronics ManualsAppliancesCordZero A9 ThinQ Kompressor Cordless Stick Vacuum Cleaner in Vintage Wine

10 INSTALLATION

INSTALLATION

Product Overview

The images in this guide may be different from the actual components and accessories, which are subject

to change by the manufacturer without prior notice for product improvement purposes.

NOTE

 For your safety and for extended product life, use only authorized components. The manufacturer is not

responsible for product malfunction, property damage or bodily injury caused by the use of separately

purchased unauthorized components, parts, or non-LG products.

 The floor stand dock and floor stand pipe are not installed in wall-mount installation.

Front View

 This feature is only available on some models.

Charging Station

Auxiliary Charging Station

Battery (Dual Battery



)

Product Body

Extension Pipe

Nozzle

Floor Stand Dock

Floor Stand Pipe

Adapter

Detachable Nozzle Storage

Tool Holders

Exhaust Filter

Pre-filter

Kompressor Lever

Cyclonic Mesh Filter

Summary of content (8 pages)

PAGE 1
0 INSTALLATION INSTALLATION Product Overview The images in this guide may be different from the actual components and accessories, which are subject to change by the manufacturer without prior notice for product improvement purposes. NOTE For your safety and for extended product life, use only authorized components. The manufacturer is not responsible for product malfunction, property damage or bodily injury caused by the use of separately purchased unauthorized components, parts, or non-LG products.
PAGE 2
INSTALLATION 11 Accessories b Slim Hard Floor Nozzle Included Accessories c Bedding Nozzle Installation Kit a Wall Anchoring Block b Double-Sided Tape a Charging Station b Extension Pipe c Adapter d Pre-filter c Drywall Anchor d Wall Anchoring Screw e Stand Anchoring Screw Tools and Accessory Bag e Battery (Dual Battery) f Floor Stand Dock g Floor Stand Pipe Basic Accessories a Combination Tool b Crevice Tool c Cleaning Brush Nozzles a Hard Dirt Tool b Mattress Tool c Multi-angle To
PAGE 3
12 INSTALLATION Mop Kit b Detachable Nozzle and Mop Pads Storage c Mop Pads for General Cleaning d Water Tank Filler This accessory is only available on some models. NOTE The mop pads, batteries, exhaust filter and the pre-filter will eventually need to be replaced. Contact an LG Electronics customer service center. a Mop Nozzle Specifications Appliance Model A9********** Dimensions (Width X Depth X Height) 10.2 in X 10.6 in X 44.1 in 260 mm X 270 mm x 1120 mm Weight Approximately 5.
PAGE 4
INSTALLATION 13 Installing the Charging Station Keep fingers away from pinch points when assembling the appliance or the charging station. To prevent tipping, self-standing mode installations should be anchored to the wall using the provided stand anchoring screw, anchoring block and double-sided tape. CAUTION Do not allow children or pets to hang onto the charging station. They could be injured or cause damage to the appliance.
PAGE 5
14 INSTALLATION 3 Slide the detachable nozzle storage onto the floor stand pipe. Make sure not to pinch or tangle the power cord behind the mop pads storage. 4 7 Align the wall anchoring block c of the chanrging station, and fix the charging station to the wall by tightening the anchoring screw d all the way. 8 Plug the power cord into the power outlet. Assemble the charging station onto the top of the floor stand pipe.
PAGE 6
INSTALLATION 15 ENGLISH 4 Plug the power cord into the power outlet. Wall-Mounted Installation For wall-mounted installations, the charging station must be attached securely to the wall using the provided (short) wall anchoring screws. Compact Installation The detachable nozzle storage cannot be attached to the charging station in a wallmounted installation. For safety and convenience, install the charging station using the self-standing or wall-mounted installation methods.
PAGE 7
16 INSTALLATION CAUTION Leaving the appliance on a level floor for a long time with the extension pipe and nozzle attached may damage the appliance. Slide the cleaning brush up into the tool holder. Slide the combination tool over the cleaning brush and onto the tool holder. To remove a tool, press the release button at the front of the tool. Storing in the Accessory Bag Assembling the Appliance Follow these steps to safely assemble the appliance.
PAGE 8
INSTALLATION 17 Make sure that the mop pads are completely dry before storing them to prevent unpleasant odors.