Use and Care Manual

31MAINTENANCE
ENGLISH
10
Turn the product body over, lift the
Kompressor lever
h
up, and clean the inside
of the working plate with the towel-wrapped
brush handle.
Cleaning the Filters
Clean the exhaust filter and the pre-filter when the
filter cleaning icon
K
lights up.
 Clean the filters more frequently if the appliance
is used regularly or in areas with a lot of dust.
CAUTION
 Do not use the appliance without the exhaust
filter and pre-filter installed. Doing so could
result in product damage.
1
Remove the battery from the product body.
2
Rotate the exhaust filter
a
to the unlocked
position
b
to separate it from the product
body.
3
Lift out the pre-filter
c
from the product
body.
4
Use the combination tool
d
to clean any dust
off the motor.
 Do not wash the motor with water.
5
Clean filters by brushing the dust off and
wash them in running water at least once a
month.
 To avoid odor and the malfunction of the
motor, allow the exhaust filter to dry
completely in a well-ventilated area out of
direct sunlight for at least 24 hours before
reassembling.
6
Insert the dried pre-filter and rotate the
exhaust filter to the locked position
e
to
reassemble it on the product body.
Cleaning the Nozzle
Clean the nozzle and rotating brush regularly.