User manual

Function
24
●
To return to the factory default settings, select [Reset] with
, buttons and press OK button.
Reset (Reset to original factory value)
1. Press the I-Sensor button of remote control.
2. Press the
, button to adjust the screen condition as you want.
I-Sensor Function
1. Press the MENU button and then use , button to select the menu.
2. Press the , button to select Film mode item.
3. Press the
, button to select On or Off.
●
Press the MENU button twice or the EXIT button to exit the menu screen.
Film mode Function
Color temp.
Smart picture
Gamma curve shift
Brilliant color
TM
White peaking 10
Black level
Expert Color
Intelligent sensor
Film mode
Reset
Natural
Presentation
On
MENU Prev. Move Select
Low
Off
Off
On
Off
●
Each press of the
, button changes the screen as shown below.
●
When the I-Sensor function is set to On, Brilliant Color
TM
and White peaking functions cannot be used.
●
You can use this function through the MENU button.
●
To exit the menu display, press the EXIT button.
* What is the I-Sensor function?
The projector adjusts its own screen brightness according to changes in surrounding lighting conditions and a
wiewer’s color adaptation capability to vividly reproduce the realistic natural colors of objects.
This function may not operate properly if the projector is installed on the ceiling or there are obstacles around it.
- This function maintains the best screen conditions when a user watches a movie.
For AV and Component 480i, 576i only.