User manual
Function
27
Function
Video Menu Options
* In this manual, the OSD(On Screen Display) may be different from your Projector’s because it is just an example to
help with the Projector operation.
* If there is no input signal present, the Menu will not be displayed.
* This operating guide explains operation of RGB(PC) mode mainly.
1. Press the MENU button and then use F, G button to select the menu.
2. Press the D , E button to select a video item you want to adjust.
3. Press the F, G button to adjust the screen condition as you want.
< RGB mode >
< Video mode >
●
Each adjustment of menu options will not affect other inputs.
As required, re-adjust menu options for the following input source :
Video/S-Video/Component (480i(576i)), Component (480p(576p), 720p, 1080i)
●
To restore the original image condition after changing it, press A OK button
after selecting [Reset] item.
●
When receiving an NTSC signal, the picture item Tint is displayed and can
be adjusted.(60Hz only)
●
To exit the menu display, repeatedly, press the MENU button.
Adjusting Video
1. Press the MENU button and then use F, G button to select the menu.
2. Press the D , E button to select APC item.
3. Press the
F, G button to adjust the screen condition as you want.
APC (Auto Picture Control)
* Use APC to set the projector for the best picture appearance.
* This function will not work in RGB mode.
●
Each press of the D, E button changes the screen as shown below.
●
To exit the menu display, repeatedly, press the MENU button.
Clear
Soft User
APC
Contrast 80
Brightness 50
Color 50
Sharpness 50
Tint 0
FG
Clear
APC
Contrast 80
Brightness 50
Color 50
Sharpness 50
Tint 0
FG
Clear
Contrast 50
Brightness 50
Color R 50
Color G 50
Color B 50
Reset
MENU Exit Move Enter
FG
< HDMI mode >
Contrast 50
Brightness 50
Reset
MENU Exit Move Enter
FG
MENU Exit Move Enter
FG
MENU Prev. Move Select
D
E
FG
ENGLISH