● aria 20 SERIES DIGITAL KEY TELEPHONE SYSTEM USER GUIDE: aria 20A, aria 20, aria 20W 20 Series: 20/20A/20W Digital Key Telephone System USER GUIDE 0
● aria 20 SERIES DIGITAL KEY TELEPHONE SYSTEM USER GUIDE: aria 20A, aria 20, aria 20W aria 20 KSU aria 20 aria 20/ 20A/ 20W/ 16/ 16A each have a similar Key-Telephone Service Unit Housing. NB: Although every effort is made to keep this Guide up to date, Features and Functions are subject to change without notice. An inclusion of a feature or function in this guide does not imply it is operational on your system. Some features require specific hardware or software installation.
● aria 20 SERIES DIGITAL KEY TELEPHONE SYSTEM USER GUIDE: aria 20A, aria 20, aria 20W Index A Alarm Reset .....................................…..………. Answering an Intercom Call ....................….……... Auto Call Number Redial ..........................……….. 14 10 8 C Call Back ................................................………... Call Forward ...........................................………... Call Park ..................................................………... Call Transfer .........................
● aria 20 SERIES DIGITAL KEY TELEPHONE SYSTEM USER GUIDE: aria 20A, aria 20, aria 20W Quick Reference Guide for aria Digital Key Telephone Fixed Feature Buttons Call Forward MUTE button allows you to switch the built in microphone on or off when using the speakerphone or the handset microphone when using the handset. MON button enables you to make a phone call with-out lifting handset. It turns the telephone on and off when using the speakerphone.
● aria 20 SERIES DIGITAL KEY TELEPHONE SYSTEM USER GUIDE: aria 20A, aria 20, aria 20W CONTENTS Index (Alphabetical Order – Digital User Guide Section)..........................................…………………………. Quick Reference Guide ……..............................................................................................................……. Digital Key Telephone Family............................................................................................................…….
● aria 20 SERIES DIGITAL KEY TELEPHONE SYSTEM USER GUIDE: aria 20A, aria 20, aria 20W CONTENTS 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 22 22 22 22 22 22 22 22 20W DECT Supplement GDC-340 LCD Display…………………………………………………………………………………………... GDC-340 Button Function……………………………………………………………………………………... DECT Features :…..……………………………….. …………………………………………………………... Call Transfer……………………………………………………………………………………………………... Call Wait (Camp On)………………………………. …………………………………………………………... Call Back…………………………………………….
● aria 20 SERIES DIGITAL KEY TELEPHONE SYSTEM USER GUIDE: aria 20A, aria 20, aria 20W NOTES & Speed Dial Entry Record Station # ……….. ………..
● aria 20 SERIES DIGITAL KEY TELEPHONE SYSTEM USER GUIDE: aria 20A, aria 20, aria 20W Digital Key Telephone Family (You cannot use any Large LCD keyset (not shown) with aria 20/20A/20W system.
● aria 20 SERIES DIGITAL KEY TELEPHONE SYSTEM USER GUIDE: aria 20A, aria 20, aria 20W Placing an Outside Call Button Procedures Lift handset or press MON button. Press outside line button, pool button or dial CO line access code. Dial desired party. When called party answers, lift handset or use speakerphone. Range 1 OR: 4 + (1 ~ 4) OR: 48 + 20/16 :( 1 ~ 6) 20W :( 1 ~ 8 ) Button Procedures Range Lift handset or press MON button to use speakerphone. Press flashing CO line button or loop key.
● aria 20 SERIES DIGITAL KEY TELEPHONE SYSTEM USER GUIDE: aria 20A, aria 20, aria 20W Queuing When a CO line is busy, you can request a call back when the CO line is available. As soon as it becomes idle, you can be the first extension to get the CO line. Button Procedures Available by Software: 16: Above V4.0 20W: Above V3.0 To answer a queue request, When the busy CO line or specific line group returns to idle, you hear ring and the queued line button is flashing.
● aria 20 SERIES DIGITAL KEY TELEPHONE SYSTEM USER GUIDE: aria 20A, aria 20, aria 20W Storing Dial by Name Users for digital display phone can enter the called party’s name so they can dial by name instead of dialing the phone number. Button Procedures Press TRANS/PGM button. Press SPEED button and speed number bin. Dial the desired phone number. Press HOLD/SAVE button. Enter the name up to 16 letters using the code: Pressing [▼] key while entering name, the last character will be erased.
● aria 20 SERIES DIGITAL KEY TELEPHONE SYSTEM USER GUIDE: aria 20A, aria 20, aria 20W Changing Differential Ring Button Procedures Range Press TRANS/PGM button. Dial 5 0 Select the ring type by dialing 1~4. Press HOLD/SAVE button. Message Waiting When the called extension does not answer the call, you can leave a message wait to the station. Button Procedures Range If a called party does not answer, press CALLBK button. Hang up.
● aria 20 SERIES DIGITAL KEY TELEPHONE SYSTEM USER GUIDE: aria 20A, aria 20, aria 20W Call Forward A call can be forwarded to the other station or group depending on the call forward type. It should be programmed in Admin. Button Procedures Lift handset or press MON button. (The MON button is lighting.) Press DND/FWD button. Press the call forward type; 1 - Unconditional 2 - Busy calls Station. No.
● aria 20 SERIES DIGITAL KEY TELEPHONE SYSTEM USER GUIDE: aria 20A, aria 20, aria 20W Flash May disconnect outside line and re-seize dial tone if programmed . It can be used to send a recall to line, when the system is connected with a PBX or Enhanced Feature Analogue Line. Button Procedures Range While connected to an outside line, press FLASH button. Placing a CO Call on Hold Button Procedures While on a CO call Press HOLD/SAVE button.
● aria 20 SERIES DIGITAL KEY TELEPHONE SYSTEM USER GUIDE: aria 20A, aria 20, aria 20W Wake-up Call The system automatically sends ring signal to a station which registers a wake-up time. There are two kinds of wake-up call, one is effective for one-day, the other is effective until canceled. Range Button Procedures To register wake-up time, Press TRANS/PGM button. Dial 4 1 and 4-digit wake-up time (HHMM) in 24-hour mode.
● aria 20 SERIES DIGITAL KEY TELEPHONE SYSTEM USER GUIDE: aria 20A, aria 20, aria 20W Voice Announcement Button Procedures Range Record your greeting, Lift handset or press MON button. Press DND/FWD button. Dial 7 # Record your greeting Press Hold/Save NB: Call Forward to DVU is automatically enabled after recording your greeting. Delete your greeting, Lift handset or press MON button. Press DND/FWD button. Dial 7 * . Activate Call Forward to DVU, Lift handset or press MON button.
● aria 20 SERIES DIGITAL KEY TELEPHONE SYSTEM USER GUIDE: aria 20A, aria 20, aria 20W Flexible Button Programming Button Range Procedures To program flexible buttons, Press TRANS/PGM button. Press a flexible button to program. See the below table and enter the desired code. Press HOLD/SAVE button. To erase a flexible button, Press TRANS/PGM button. Press the flexible button to be erased. Press HOLD/SAVE button.
● aria 20 SERIES DIGITAL KEY TELEPHONE SYSTEM USER GUIDE: aria 20A, aria 20, aria 20W Wake-up Call Button Procedures To register wake-up call, Press TRANS/PGM button. Dial 4 1 Enter the station range (XXX-YYY) to receive wake-up call. After hearing confirmation tone, enter 4-digit wake-up time (HHmm) in 24-hour mode. (HH= 00~23, mm= 00~59) Press HOLD/SAVE button for one-day, or dial # and HOLD/SAVE button for until canceled. To cancel wake-up call, Press TRANS/PGM button. Dial 4 2 .
● aria 20 SERIES DIGITAL KEY TELEPHONE SYSTEM USER GUIDE: aria 20A, aria 20, aria 20W To Set Current Time 1 Hour Early/Late Button Procedure To set the current time 1 hour early, Press TRANS/PGM button. Dial * 1. To set the current time 1 hour late, Press TRANS/PGM button. Dial * 2. System Speed Dial To store system speed numbers, Press TRANS/PGM button. Dial SPEED button. Dial speed number bin. Dial the phone numbers to be stored. Dial HOLD/SAVE button.
● aria 20 SERIES DIGITAL KEY TELEPHONE SYSTEM USER GUIDE: aria 20A, aria 20, aria 20W To Print out Accumulated SMDR Records Station Message Detail Recording(SMDR) can provide details on both incoming and outgoing calls. Button Procedures For station basis, Available by Software: Dial TRANS/PGM + * 8 1 aria 16: Above V4.0 Enter the desired station range. aria 20W: Above V3.0) Press HOLD/SAVE button. All aria 20 Accumulated SMDR records will be printed out through the printer connected to KSU.
● aria 20 SERIES DIGITAL KEY TELEPHONE SYSTEM USER GUIDE: aria 20A, aria 20, aria 20W Attendant Programming Menu Table The attendant can program some features with this table by pressing TRANS/PGM button then the appropriate codes: Attendant Main Menu Attendant Sub Menu-1 Attendant Sub Menu-2 Selection [1] Clock Set [#] [1] System Message 01 - 19 [2] System Prompt 1-9 [1] Set Current Time 1 hr early - immediate - [2] Set Current Time 1 hr late - immediate - [5] Date Format Toggle DDMMYY /
● aria 20 SERIES DIGITAL KEY TELEPHONE SYSTEM USER GUIDE: aria 20A, aria 20, aria 20W Analogue Single Line Telephone User Guide for aria Telephone Systems Placing an Outside Call Lift handset. Dial 1. Dial the desired number. Making a Screened Transfer Placing an Outside Call via CO Group Access Lift handset. Dial 8 and CO group number. (1~4) Dial the desired number.
● aria 20 SERIES DIGITAL KEY TELEPHONE SYSTEM USER GUIDE: aria 20A, aria 20, aria 20W Voice Announcement Programming a Name for an SLT Recording Your Message; Lift handset. Dial 5 4 + 7 + # . Record your message. Replace the handset. NB: Call Forward to DVU is automatically enabled after recording your greeting. Deleting Your Message; Lift handset. Dial 5 4 + 7 + * . Replace the handset. To hear the recorded Message, Dial 5 7.
● aria 20 SERIES DIGITAL KEY TELEPHONE SYSTEM USER GUIDE: aria 20A, aria 20, aria 20W 20W Dect Supplement GDC-340 LCD Display The LCD of GDC-340H GAP has eight icons and 2 x 12 Dot matrix. The LCD shows different wireless states and displays visual feedback for the actions performed by user.
● aria 20 SERIES DIGITAL KEY TELEPHONE SYSTEM USER GUIDE: aria 20A, aria 20, aria 20W GDC-340 Button Function DECT SUPPLIMENT 24
● aria 20 SERIES DIGITAL KEY TELEPHONE SYSTEM USER GUIDE: aria 20A, aria 20, aria 20W GDC-340 Button Function (cont) aria 20W DECT Features (GDC-340/ 345 shown) DECT SUPPLIMENT 25
● aria 20 SERIES DIGITAL KEY TELEPHONE SYSTEM USER GUIDE: aria 20A, aria 20, aria 20W GDC-340 Handset Menu DECT SUPPLIMENT 26