User manual

Operating Instructions
10 Indoor Unit
Flip-up door
(opened)
Signal transmitter
ON
OFF
CANCEL
AUTO CLEAN
SET
5
1
3
10
9
17
12
14
16
6
4
2
7
11
8
13
15
Wireless Remote Controller
(Optional)
1. Start/Stop Button
Operation starts when this button is pressed.
2. Operation Mode Selection Button
Used to select the operation mode.
3. Room Temperature Setting Buttons
Used to select the room temperature.
4. Indoor Fan Speed Selector
Used to select fan speed in four steps low, medium,
high and Chaos.
5. Jet Cool
Speed cooling/heating operates super high fan
speed.
6. Chaos Swing Button
Used to stop or start louver movement and set the
desired up/down airflow direction.(Up/Down airflow)
7. On/Off Timer Buttons
Used to set the time of starting and stopping
operation.
8. Time Setting Button
Used to adjust the time.
9. Timer Set/Cancel Button
Used to set the timer when the desired time is
obtained and to cancel the Timer operation.
10. Sleep Mode Auto Button
Used to set Sleep Mode Auto operation.
11. Air Circulation Button
Used to circulate the room air without cooling or
heating.
12. Room Temperature Button
Used to set the desired horizontal airflow
direction.
13. Horizontal Airflow Direction Control Button
Used to set the desired horizontal airflow
direction.(Not available)
14. Reset Button
Initialize remote controller.
15. 2nd F Button
Used prior to using modes printed in blue at the
bottom of buttons.
16. Auto Clean
Used to set Auto Clean mode.(Not available)
PQWRHSF0(Heat pump)
PQWRCSF0(Cooling only)