Troubleshooting Guide
24
TROUBLESHOOTING
ENGLISH
TROUBLESHOOTING
Before Calling for Service
Problem Possible Cause Solutions
Air purifier does
not turn on.
• Power cord not plugged in.
• Incorrect power rating.
• Plug cord securely into socket.
• Make sure outlet is rated for 115V.
Air output is weak,
product makes a
noise.
• Pre-filter is clogged.
• Dust accumulation on the
Puricare Main Filter.
• Clean the pre-filter.
• Replace the Puricare Main Filter.
Air purification
does not work
well.
• Indoor air quality is very bad.
• Dust has built up on the pre-
filter or Puricare Main Filter.
• Usage area is too large.
• Nearby objects are blocking air
circulation.
• The product is installed in a
corner.
• Ventilate the room before using the air
purifier.
• Clean the pre-filter or replace the
Puricare Main Filter.
• Use the product in a smaller area or an
area more protected from the influx of
outside air.
• Remove nearby obstacles or move the
product to a different location.
• Move the product.
Strange odor
coming from air
outlet.
• Installed in area with heavy
smoke or odors.
• Odor coming from deodorizing
filter.
• Very heavy smoke or odors may
degrade the performance of the filters.
Ventilate the area before using the air
purifier.
• Replace the deodorizing filter.
There is an odor,
but the Indicator
lamp does not
change.
• Odor sensor may not respond
to food odors as harmful.
• Odor sensor may not respond to food
odors as harmful, but odors are
removed by the deodorizing filter.
Air quality shows
red continuously.
• Air purifier may be unable to
process amount of
contamination in air.
• Water or oil sprayed near air
purifier.
• Try moving product to another room to
clear the indicator.
• Do not spray water or oil near the air
purifier.
Buttons do not
work.
• Lock function is enabled.
• Press and hold Speed button and
Indicator button for 3 seconds to
disable the Lock function.
If there is a problem with the product, check the following first before calling for service.
1,MFL68181332,영영 17. 2. 9. 영영 6:09 Page 24