BD300-N_AUSALLK_ENG_8053 2/12/09 5:15 PM Page 1 Network Blu-ray Disc Player Owner’s Manual Model: BD300 Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely. For service/ support Call: Toll Free Number As an ENERGY STAR Partner, LG has determined that this product or product models meet the ENERGY STAR® guidelines for energy efficiency. ® ENERGY STAR® is a U.S. registered mark. 1-800-243-0000 (http://us.lgservice.
BD300-N_AUSALLK_ENG_8053 2/12/09 5:15 PM Page 2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus. CAUTION concerning the Power Cord CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
2/12/09 5:15 PM Page 3 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
BD300-N_AUSALLK_ENG_8053 2/12/09 5:15 PM Page 4 Notes on Copyrights Because AACS (Advanced Access Content System) is approved as content protection system for BD format, similar to use of CSS (Content Scramble System) for DVD format, certain restrictions are imposed on playback, analog signal output, etc., of AACS protected contents.
2/12/09 5:15 PM Page 5 Introduction To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference. Cleaning Discs Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center out. Introduction BD300-N_AUSALLK_ENG_8053 This manual provides information on the operation and maintenance of your player.
BD300-N_AUSALLK_ENG_8053 2/12/09 5:15 PM Page 6 Playable Discs Blu-ray Disc - Discs such as movies that can be purchased or rented - BD-R/RE discs that contain audio titles, MP3, WMA, or Photo files. Regional Code This unit has a regional code printed on the rear of the unit. This unit can play only BD-ROM or DVD discs labeled same as the rear of the unit or “ALL”.
2/12/09 5:15 PM Page 7 BD-ROM Disc Features BD-ROM Discs can store 25 GB (single layer) or 50 GB (dual layer) on a single sided disc - about 5 to 10 times the capacity of a DVD. BD-ROM Discs also support the highest quality HD video available in the industry (up to 1920 x 1080) Large capacity means no compromise on video quality. Furthermore, a BD-ROM disc has the same familiar size and look as DVD. • The following BD-ROM disc features are disc dependent and will vary.
BD300-N_AUSALLK_ENG_8053 2/12/09 5:15 PM Page 8 Compatibility Notes Network update notification Because BD-ROM are a new format, certain disc, digital connection and other compatibility issues are possible. If you experience compatibility problems, please contact an authorized Customer Service Center. If there is a new software is uploaded in the update server, this player let you know that there is a new software update available through via network connection as shown below.
BD300-N_AUSALLK_ENG_8053 2/12/09 5:15 PM Page 9 Using an USB Devices Using the USB Device Inserting/Removing the USB Device Introduction 1. Connect a USB Device. This unit can play the music and photo files contained in the USB device. 2. Press HOME on the Remote Control. 3. Select [Music] or [Photo] option then press ENTER. 4. Select [USB] then press ENTER. MUSIC (or PHOTO) menu will appear. Details for the menu are on pages 30-31.
BD300-N_AUSALLK_ENG_8053 2/12/09 5:15 PM Page 10 Front Panel a b c d e f a 1 (POWER) Button Switches the unit ON or OFF. g h i f N / X (PLAY / PAUSE) Starts playback. Pause playback temporarily, press again to exit pause mode. b Disc Tray Insert a disc here. g x (STOP) Stops playback. c Display Window Shows the current status of the player. h . / > (SKIP) Go to next or previous track/chapter. d Remote Sensor Point the Remote Control here. i USB Port Connect a USB Device.
2/12/09 Remote Control 5:15 PM Page 11 OPEN/CLOSE (Z): Opens and closes the disc tray. PIP*: Switches on/off Secondary Video (Picture-in-picture) (BDROM only). a REPEAT: Repeat a desired section. PIP AUDIO*: Switch on/off Secondary Audio (BD-ROM only). SUBTITLE ON/OFF: Switches the subtitle on or off. A-B: Repeat sequence. b AUDIO ( ): Selects an audio language or audio channel. SUBTITLE ( ): Selects a subtitle language. ANGLE ( ): Selects a disc camera angle, if available.
BD300-N_AUSALLK_ENG_8053 2/12/09 5:15 PM Page 12 Installation and Setup Rear Panel a b f g c d e h a AC IN connector Connect the supplied power cord. b COMPONENT VIDEO OUT (Y Pb Pr) Connect to a TV with Y Pb Pr inputs. c DIGITAL AUDIO OUT (COAXIAL) Connect to digital (coaxial) audio equipment. d HDMI OUT (Type A) Connect to TV with HDMI inputs. (Interface for digital audio and video) 12 e LAN port Connect a network with an always-on broadband connection.
2/12/09 5:15 PM Page 13 HDMI connection HDMI compatible TV HDMI If you have a HDMI TV or monitor, you can connect it to this player using a HDMI cable. 1. Connect the HDMI jack on the player to the HDMI jack on a HDMI compatible TV or monitor (H). 2. Set the TV’s source to HDMI (refer to TV’s Owner’s manual). H Notes: You must select a HDMI audio output and a maximum sampling frequency that your TV accepts using [HDMI] and [Sampling Freq.] options on the setup menu (see page 20).
BD300-N_AUSALLK_ENG_8053 2/12/09 5:15 PM Page 14 Connections to Your TV Make one of the following connections, depending on the capabilities of your existing equipment. Rear of TV L Tips Depending on your TV and other equipment you wish to connect, there are various ways you could connect the player. Use only one of the connections described below. Please refer to the manuals of your TV, Stereo System or other devices as necessary to make the best connections.
2/12/09 5:15 PM Page 15 Connecting to an Amplifier Make one of the following connections, depending on the capabilities of your existing equipment. Note: Since many factors affect the type of audio output, see “The unit’s Audio Output Specifications” on page 43 for details. Connecting to an Amplifier via 2 Channel Audio Output Connect the Left and Right 2CH AUDIO OUT jacks on the player to the audio left and right in jacks on your amplifier, receiver, or stereo system, using audio cables (A).
BD300-N_AUSALLK_ENG_8053 2/12/09 5:15 PM Page 16 Internet connection • This player can be connected to a local area network (LAN) via the LAN port on the rear panel. After making the physical connection the player needs to be set up for network communication. This is done from the [Setup] menu — see “[NETWORK] Menu” on page 22 for detailed instructions. • Connect the player’s LAN port to the corresponding port on your Modem or Router using a LAN cable.
2/12/09 5:15 PM Page 17 Resolution Setting 5. Use v / V to select the desired resolution then press ENTER to confirm your selection. The player provides several output resolutions for HDMI OUT and COMPONENT VIDEO OUT jacks. You can change the resolution using [Setup] menu or pressing the RESOLUTION button in stop mode.
BD300-N_AUSALLK_ENG_8053 2/12/09 5:15 PM Page 18 Video output according to the Resolution setting • When the copy unprotected media is playing back Video Output HDMI OUT Resolution Setting COMPONENT VIDEO OUT HDMI connected VIDEO OUT HDMI disconnected 480i 480p 480i 480i 480p 480p 480p 480i 720p 720p 720p 480i 1080i 1080i 1080i 480i 1080p / 24Hz Mode 1080p / 24Hz Mode 480i 1080i 480i 1080p / 60Hz Mode 1080p / 60Hz Mode 480i 1080i 480i • When the copy protected media is pl
2/12/09 5:15 PM Page 19 Initial Settings By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 19 to 23. To display and exit the Menu: Press HOME and the Home Menu appears. Select [Setup] then press ENTER, and Setup menu appears. Press RETURN or HOME to exit the Setup menu. To go to the next level: Press B on the Remote Control.
BD300-N_AUSALLK_ENG_8053 2/12/09 5:15 PM Page 20 [LANGUAGE] Menu [PCM Stereo] – Select if you connect this unit’s HDMI OUT or DIGITAL AUDIO OUT jack to a device with two-channel digital stereo decoder. [PCM Multi-Ch] (HDMI only) – Select if you connect this unit’s HDMI OUT jack to a device with multi-channel digital decoder. [DTS Re-Encode] – Select if you connect this unit’s HDMI OUT or DIGITAL AUDIO OUT jack to a device with DTS decoder.
BD300-N_AUSALLK_ENG_8053 2/12/09 5:15 PM Page 21 [LOCK] Menu (Parental Control) Rating The [LOCK] settings affect only Netflix movie, BD and DVD playback. Blocks playback of rated disc based on their content. (Not all discs are rated.) 2. To access this option, you must input the password you have created. If you have not yet entered password, you will be prompted to do so. Input a password and press ENTER. Enter it again and press ENTER to verify.
BD300-N_AUSALLK_ENG_8053 2/12/09 5:15 PM Page 22 [NETWORK] Menu BD-LIVE connection The [NETWORK] settings are needed to use the software update, BD Live, Netflix features and YouTube features. Some BD-ROM discs may enable you to access special BD-ROM sites, if you connect the player to the Internet. For example, if an BD-ROM site includes content such as links to future movie trailers, you can watch the downloaded on-line content on the player. You do not need to connect to a PC to use this function.
BD300-N_AUSALLK_ENG_8053 2/12/09 5:15 PM Page 23 [OTHERS] Menu Software Update You can update the software by connecting the unit directly to the software update server (see page 44). We provide you the Netflix ESN (Electronic Serial Number) that allows you to rent and purchase videos using the Netflix website. For more information, please visit: www.netflix.com Skin Changes the background of the initial screen.
BD300-N_AUSALLK_ENG_8053 2/12/09 5:15 PM Page 24 Operations General disc playback features 1. Load your chosen disc in the tray, with the playback side down. 2. Start playback using the HOME menu (see page 9). Buttons Operations Discs OPEN / CLOSE (Z) Opens or closes the disc tray. All Discs x (STOP) Stops the playback. The unit records the stopped point, depending on the disc. “Xx” appears on the screen briefly. Press N (PLAY) to resume playback (from the scene point).
BD300-N_AUSALLK_ENG_8053 2/12/09 5:15 PM Page 25 General disc playback features (Continued) Buttons Operations TITLE/POP UP If the current DVD or BD-ROM disc has a menu, the Title DVD menu or Popup menu appears on the screen. Depending on the disc, the menu may not be available. BD AVCHD DISC MENU The menu appears on the screen. Depending on the disc, the menu may not be available.
BD300-N_AUSALLK_ENG_8053 2/12/09 5:15 PM Page 26 If a disc menu screen is displayed DVD BD AVCHD Use b / B / v / V buttons to select the title/chapter you want to view, then press ENTER to start playback. Enlarge the playback image BD AVCHD 1. During playback or pause mode, press ZOOM to display the [ZOOM] menu. 2. Use b / B to select zoom mode (16 steps). Press RETURN to disappear the menu. 3. To return to the normal picture size, select [Off] on the [ZOOM] menu.
BD300-N_AUSALLK_ENG_8053 2/12/09 5:15 PM Page 27 Displaying Disc Information On-Screen DVD BD AVCHD You can display various information about the disc loaded on-screen. 2. During BD-ROM or DVD playback, you can select an item by pressing v / V and change or select the setting by pressing b / B. Title – Current title number/total number of titles. Chapter – Current chapter number/total number of chapters. Time – Elapsed playing time. Audio – Selected audio language or channel.
BD300-N_AUSALLK_ENG_8053 2/12/09 5:15 PM Page 28 Enjoying BD-LIVE™ or BONUS VIEW™ in BD-Video BD – Additional contents such as movie’s trailer, subtitles and BD-J, etc. can be downloaded to USB device to play them. This unit allows you to enjoy functions such as picture-in-picture, secondary audio and Virtual packages, etc., with BD-Video supporting BONUSVIEW (BD-ROM version 2 Profile 1 version 1.1/ Final Standard Profile).
BD300-N_AUSALLK_ENG_8053 2/12/09 5:15 PM Page 29 Playing a DVD VR Format Disc MOVIE menu options This unit will play DVD-RW disc that is recorded using the Video Recording (VR) format. 1. Use v / V to select a title on the [MOVIE] menu then press ENTER. The menu options appear. 1. Insert a disc and close the tray. The [MOVIE] menu appears on the TV screen 2. Use v / V to select an option, then press ENTER. 3. Press DISC MENU to move to the list menu. • [Play] Starts playback the selected title.
BD300-N_AUSALLK_ENG_8053 2/12/09 5:15 PM Playing an Audio CD or MP3/WMA files ACD MP3 Page 30 MUSIC menu options WMA The player can play Audio CDs and MP3/WMA files. Before playing MP3/WMA files, read “MP3/WMA audio file requirement” on right. 1. Use v / V to select a track or file on the MUSIC menu then press ENTER. The menu options appear. 2. Use v / V to select an option, then press ENTER. 1. Insert Audio CD or a disc containing MP3/WMA files, or connect the USB Device containing MP3/WMA files 2.
BD300-N_AUSALLK_ENG_8053 2/12/09 Viewing a Photo file 5:15 PM Page 31 PHOTO Options during viewing a photo file in full screen This unit can play a photo files. Before playing photo recordings, read “Photo file requirement” on below. 1. Follow steps 1-4 as shown left (Viewing a Photo file). 1. Insert a disc containing photo files, or connect the USB Device containing photo files. 2. You can use variable options during viewing a picture. 2. Press HOME and Home Menu appears. 3.
BD300-N_AUSALLK_ENG_8053 2/12/09 5:15 PM Page 32 Netflix Operation You can instantly watch movies (very few new releases) & TV episodes from Netflix streamed over the internet to your TV via your LG BD300. To become a Netflix member visit: www.netflix.com/LG Preparations: Step 1: Check the Network Connection Activating your player Activating your player establishes a connection between your player and your Netflix account.
BD300-N_AUSALLK_ENG_8053 2/12/09 5:15 PM Page 33 Using your player for Netflix After you activate your player, you’re ready to add movies & TV episodes to your instant Queue. You can then use your player’s remote to browse your instant Queue and to select and watch titles on your TV. You will be amazed at how quick and easy it is. Filling your instant Queue Your instant Queue works just like your DVD Queue.
BD300-N_AUSALLK_ENG_8053 2/12/09 5:15 PM Page 34 Playing a movie While watching a movie or TV episode from Netflix via your player, you have full control over your viewing experience. You can use the buttons on the remote to pause and resume viewing and to scan forward and backward, just like when you watch a DVD. While playing a movie, the buttons on the remote do the following: 34 Button(s) Operations N Starts playing back the movie. X To pause a movie while it’s playing.
BD300-N_AUSALLK_ENG_8053 2/12/09 5:15 PM Page 35 YouTube Operation Preparations: Step 1: Check the Network Connection About the YouTube menu There are various options on the YouTube menu. Use v V b B to select an option and press ENTER to select the options as described below. See page 16. Step 2: Configuring Network Settings See page 22. Step 3: Checking Network Configuration 1. Select [NETWORK] on the [Setup] menu. 2. Select [IP Mode] option on the [NETWORK] menu. 3.
BD300-N_AUSALLK_ENG_8053 2/12/09 5:15 PM Page 36 About YouTube playback screen While playing When you press PLAY (N) or ENTER at the video you want to watch, the playback screen and content detail will appear on the screen. playback screen While watching a video from YouTube via your player, you can control the YouTube video playback. You can use the buttons on the remote to pause and resume viewing, just like when you watch a DVD.
2/12/09 5:15 PM Page 37 Searching videos You can search for videos by entering search words of up to 128 characters. Use b B to select [Search] option from the menu and press ENTER to display the keyboard menu. Use v V b B to select a character then press ENTER to confirm your selection on the keyboard menu. When you entering a character, maximum of 5 suggestion words will be displayed. To enter a letter with an accent mark, select the letter from extended character set.
BD300-N_AUSALLK_ENG_8053 2/12/09 5:15 PM Page 38 To program the remote to control the TV using the manufacturer code Reference Controlling a TV with the Supplied Universal Remote Control You can control the volume, input source, and power state of your TV with the supplied Universal Remote Control. If your TV is listed in the table on page 39, set the appropriate manufacturer code. Follow steps 1-2 as shown right. You can control your TV using the buttons below. 1.
BD300-N_AUSALLK_ENG_8053 2/12/09 5:15 PM Page 39 Code numbers of controllable TVs Manufacturer Code Number Manufacturer Code Number Manufacturer Code Number A MARK 112 143 KEC 043 REALISTIC 007 019 043 047 ADMIRAL 072 081 161 KENWOOD 006 070 ROCTEC 186 AKAI 006 146 KLOSS 002 059 RUNCO 168 169 AMPRO 073 167 KMC 143 SAMPO 004 006 058 116 AMSTRAD 052 KTV 006 043 143 154 SAMSUNG ANAM 026 043 054 056 080 104 108 112 115 118 121 131 LG 004 050 089 101 105 113 116 127 133
BD300-N_AUSALLK_ENG_8053 2/12/09 5:15 PM Page 40 Language Codes Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
BD300-N_AUSALLK_ENG_8053 2/12/09 5:15 PM Page 41 Troubleshooting Correction Possible Cause Symptom No power. • The power cord is disconnected. • Plug the power cord into the wall outlet securely. The power is on, but the player does not work. • No disc is inserted. • Insert a disc. (Check the disc indicator in the display window is lit.) No picture. • The TV is not set to receive DVD signal output. • Select the appropriate video input mode on the TV.
BD300-N_AUSALLK_ENG_8053 2/12/09 5:15 PM Page 42 Specifications General Power requirements: AC 120 V~, 60 Hz Power consumption: 26W Dimensions (W x H x D): Approx. 16.9 x 2.3 x 10.9 inches (430 x 58 x 277 mm) without foot Net Weight (Approx.): 6.6 lbs (3 kg) Operating temperature: 41 °F to 95 °F (5 °C to 35 °C) Operating humidity: 5 % to 90 % Outputs VIDEO OUT: 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1 COMPONENT VIDEO OUT: (Y) 1.
BD300-N_AUSALLK_ENG_8053 2/12/09 5:15 PM Page 43 The unit’s Audio Output Specifications Jack/ Setting Source Format Analog Output Stereo SPDIF (DIGITAL AUDIO OUT) *5 PCM Stereo DTS Re-encode *3 *6 Primary Pass-Thru *1 Dolby Digital PCM 2ch PCM 2ch DTS Dolby Digital Dolby Digital Plus PCM 2ch PCM 2ch DTS Dolby Digital Dolby TrueHD PCM 2ch PCM 2ch DTS Dolby Digital DTS PCM 2ch PCM 2ch DTS DTS DTS-HD PCM 2ch PCM 2ch DTS DTS Linear PCM 2ch PCM 2ch PCM 2ch DTS PCM 2ch Linea
BD300-N_AUSALLK_ENG_8053 2/12/09 5:15 PM Page 44 Software Update Caution: Pressing ENTER while checking for the update will end the process. You can update the Player using the latest software to enhance the products operation and/or add new features. You can update the software by connecting the unit directly to the software update server. Step 1: Check the Network Connection See page 16. Step 2: Configuring Network Settings See page 22. Step 3: Checking Network Configuration 1.
BD300-N_AUSALLK_ENG_8053 2/12/09 5:15 PM Page 45 Open source software notice The following GPL executables and LGPL libraries used in this product are subject to the GPL2.0/LGPL2.1 License Agreements: GPL EXECUTABLES: Linux kernel 2.
BD300-N_AUSALLK_ENG_8053 Notes 46 2/12/09 5:15 PM Page 46
BD300-N_AUSALLK_ENG_8053 2/12/09 5:15 PM Page 47 Reference Notes 47
BD300-N_AUSALLK_ENG_8053 2/12/09 5:15 PM Page 48 LG Electronics, Inc. Limited Warranty - USA This LG Electronics product, will be repaired or replaced, at LG’s option, if it proves to be defective in material or workmanship, under normal use, during the warranty period (“Warranty Period”) listed below, effective from the date (“Date of Purchase”) of original consumer purchase of the product.