User manual
Table Of Contents
- 1 Getting Started
- 2 Connecting
- 3 System Setting
- 4 Operating
- General Playback
- Using [HOME] menu
- Playing a Disc
- Playing a file on the hard disk drive/disc/USB device
- Playing Blu-ray 3D disc
- Enjoying BD-Live™
- Playing a file on a network server
- Wi-Fi Direct™ Connection
- Basic operations for video and audio content
- Basic operations for photo content
- Using the disc menu
- Searching content in the hard disk drive by entering file name
- Resume playback
- Advanced Playback
- Repeat Playback
- Repeating a specific portion
- Enlarge the playback image
- Marker Search
- Using the search menu
- Changing content list view
- Viewing content information
- Selecting a subtitle file
- Last Scene Memory
- Applying your photo to the Wallpaper
- Options while viewing a photo
- Listening to music while slide show
- Using the Music Library
- Using the Photo Library
- On-Screen display
- Copying
- Viewing information from Gracenote Media Database
- Using the Premium
- Using the LG Apps
- General Playback
- 5 Troubleshooting
- 6 Appendix
Connecting 21
Connecting
2
Wired Network Setup
If there is a DHCP server on the local area network
(LAN) via wired connection, this player will
automatically be allocated an IP address. After
making the physical connection, a small number of
home networks may require the player’s network
setting to be adjusted. Adjust the [NETWORK]
setting as follow.
Preparation
Before setting the wired network, you need to
connect the broadband internet to your home
network.
1. Select [Connection Setting] option in the
[Setup] menu then press ENTER (
b
).
2. The [Connection Setting] menu appear on the
screen. Use
W/S
to select the [Wired] and
press ENTER (
b
).
3. Use
W/S/A/D
to select the IP mode
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
If there is no DHCP server on the network and
you want to set the IP address manually, select
[Static] then set [IP Address], [Subnet Mask],
[Gateway] and [DNS Server] using
W/S/
A/D
and numerical buttons. If you make a
mistake while entering a number, press CLEAR
to clear the highlighted part.
,
Note
4. Select [OK] and press ENTER (
b
) to apply
network settings.
5. The player will ask you to test the network
connection. Select [OK] and press ENTER (
b
) to
complete the network connection.
6. If you select [Test] and press ENTER (
b
) at
step 5 above, the network connection status is
displayed on the screen.
You can also test it on the [Connection Status]
in the [Setup] menu.