User guide

30 Installation
Installation
3
Satellite Setting
This recorder needs some settings in advance
for satellite antenna (see pages 15-16).
Editing Programme List
(Channel Edit)
You can remove any digital TV or radio stored
on this recorder using the [Channel Edit] menu.
1. Display [Setup] menu.
2. Use
U
/
u
to select [DTV], and press ENTER.
3. Use
U
/
u
/
I
/
i
to select [Channel Edit] and
press ENTER.
4. Press
U
to select [DTV], and use
I
/
i
to
select [DTV] or [Radio] programme list.
5. Use
U
/
u
/
I
/
i
to select a programme you
want to skip from the list, and press red
coloured (R) button.
If you do not want to skip the programme,
select the programme and press red
coloured (R) button again.
Use
U
/
u
/
I
/
i
to select a programme you
want to lock from the list, and press blue
coloured (B) button.
if you do not want to lock the programme,
select the programme and press blue
coloured (B) button again.
6. Press RETURN to return to the previous step.
skip : if the programme is assigned to skip,
you can’t select that programme with PR
button in Remote control.
Block/unblock : if the programme is
assigned to block and
[DTV Lock] in the
[Setup] menu is set to [Lock]
, you should enter
the password to watch the programme.
Setting the Country
You can choice the country where you operate
this unit.
1. Display [Setup] menu.
2. Use
U
/
u
to select [DTV], and press ENTER
(
).
3. Use
U
/
u
to select [Country] and press
ENTER (
).
4. Use
U
/
u
to select a country, and press
ENTER (
).
Setting the DTV Lock
Allows you to activate or deactivate all of the
lock schemes previously set. When the [DTV
Lock] is set to [Un
lock
].
1. Display [Setup] menu.
2. Use
U
/
u
/
I
/
i
to select [LOCK] and press
ENTER (
).
3. Use
U
/
u
to select [DTV Lock] and press
ENTER (
).
4. Input the password using numerical
buttons.
If you have not set your password yet, input
“1234” and press ENTER (
).
5. Use
U
/
u
to select [Lock] and press ENTER
(
) to activate the DTV Lock.