User guide

16 Installation
Installation
3
7. Select [Start] and press ENTER ( ) to begin
the channel search.
Use
U
/
u
to select a satellite check box and
press ENTER ( ) to select or deselect it.
You can search All, FREE, CAS channels
individually. Press
U
, you can select Search
Type with
I
/
i
.
All : All channels the satellite searches.
FREE: Free of charge channels.
CAS(Conditional Access System:
Pay channels.
Select [Stop] and press ENTER ( ) to stop
the channel search.
8. Press ENTER ( ).
NOTE
Please refer to the manuals of your TV, Stereo
System or other devices as necessary to make the
best connections.
Auto Tuning
All available satellite TV or radio programmes
are searched.
1. Use
U
/
u
to select the [Auto Tuning] and
press ENTER ( ).
2. Follow the steps 7-8 from “Antenna Setting”
on page 15-16.
Manual Tuning
All available satellite TV or radio programmes
are searched.
1. Use
U
/
u
to select the [Manual Tuning] and
press ENTER ( ).
2. Select an item using
U
/
u
and If you know
the programmed [Satellite], [Frequency],
[Polarization], [Symbol Rate], [Modulation],
[Network Search] and [Search Type],
use
I
/
i
to select the desired, Fill the
[Frequency] and [Symbol Rate] eld using
numerical buttons.
3. Select [Start] and press ENTER ( ) to begin
the channel search.
Select [Stop] and press ENTER ( ) to stop
the channel search.
4. Press ENTER ( ).
NOTE
• Select [Stop] and press ENTER ( ) to stop the
network search.
• If you set this option to [On], the unit will search
available transponders through network.
BD582SC-P.BDEULLK_MFL65225402_ENG.indd 16 10. 9. 17. �� 7:38