User guide

Interface USB 2.0 & eSATA
General Supported Discs BD-ROM (SL/DL), BD-R (SL/DL), BD-RE (SL/DL),
DVD-ROM (SL/DL), DVD-R (SL/DL), DVD-RW SL,
DVD-RAM, DVD+R (SL/DL), DVD+RW, CD-ROM
Mode-1, Mode-2 data disc, CD-ROM XA, CD-I,
Photo-CD Multi-Session, Video CD, CD-Audio
Disc, Mixed mode CD-ROM disc (data and audio),
CD-Extra, CD-Text, CD-R, CD-RW
Dimensions (WxHxD) 163x50x260mm
Weights About 1.5Kg
Write/Read speed Media Write Read
BD-R (SL/DL) USB 2x, 4x, 6x 6x / 6x max.
eSATA 2x, 4x, 6x, 8x 8x / 8x max.
BD-ROM (SL/DL) USB - 6x max.
eSATA - 8x max.
BD-R (SL L to H) 2x 4x max.
BD-RE (SL/DL) 2x 4.8x max.
DVD-R 2x, 4x, 8x, 12x, 16x 16x max.
DVD-R DL 2x, 4x 8x max
DVD-RW SL 1x, 2x, 4x, 6x 10x max.
DVD-RAM 2x, 3x, 5x 5x max.
DVD+R 2.4x, 4x, 8x, 12x 16x 16x max.
DVD+R DL 2.4x, 4x 8x max.
DVD+RW SL 2.4x, 4x, 6x, 8x 10x max.
CD-R 8x, 16x, 24x, 32x, 40x, 48x 48x max.
CD-RW 4x, 10x, 16x, 24x 40x max.
CD-ROM - 48x max.
CD-DA - 40x max.
Performance BD-ROM: 287.72 Mbits/s (8x max.)
DVD-ROM: 22.16 Mbytes/s (16x max.)
CD-ROM: 7200 Kbytes/s (48x max.)
BD-ROM:180ms(Typical)
Average Access DVD-ROM: 160ms(Typical)
(1/3 stroke) DVD-RAM: 180ms(Typical)
CD-ROM: 150ms(Typical)
Buffer capacity 4 Mbytes
MTBF 100,000 Power On Hours
Environmental Level When operating Temperature: 5 to 40 C Humidity: 15% to 85%
When not operating Temperature: -30 to 60 C Humidity: 10 % to 90%
Electrical Power DC 12V
Data transfer rate
Sustained
11
Specifications
*1
The disc of the cartridge type is not supported.
*2
BD-RE: The disc of version 1.0 is not supported.
*3
DVD-RAM 12X media: Not supported to write.
*4
There might be some cases when this drive can not satisfy the best performance depending on the conditions
of the disc, the drive, and the recording format.
-
The maximum data transfer rate varies according to the performance capabilities of the PC.
- For the sake of periodic improvements, specifications and appearance are subject to change without notice.
- We have taken all possible measures to assure the quality of our products, but we cannot be responsible for
the consequences if defect occurs.