User guide
12
English
Introduction
5 Sleep Press “Sleep” to set the countdown
timer interval. The projector will auto-
matically power off when the count-
down has nished. (in minutes)
6 Still Pause the screen image. Press again to
resume the screen image.
7 Blank Use this function to choose blank
color.
8 Menu Press “Menu” to launch the Onscreen
display (OSD), back to the top level of
OSD for the OSD main menu opera-
tion
9 Ratio Use this function to choose your
desired aspect ratio.
10 OK Conrm your section of items in sub
menu operation.
11 Four
Directional
Select Keys
Use or or or to select items
or make adjustments to your selec-
tion.
12 Auto Automatically synchronize the
projector to the VGA(RGB) and Video
signal input sources.
13 Zoom Zoom out or zoom in the projector
display.
14 Info To display the projector information for
“Source”, “Resolution or Video”, “ECO
Mode” and “Sleep Countdown” on the
screen. (refer to page 34)
15 Eco When Eco mode is activated, the
brightness detected to signicantly re-
duced lamp power consumption (up
to 70%) during periods of inactivity.
16 Keystone Press to adjust image distortion
caused by tilting the projector.