User guide

English

Installation

Powering On the Projector

1. Ensure that the power cable and signal cable are securely

connected. The POWER LED will turn orange.

2. Turn on the lamp by pressing “POWER ” on the remote

control  or the control panel . The POWER LED will

 ash green.

When disappear startup screen, the POWER LED will turn

green.

3. Turn on your source (computer, notebook, video player,

etc.) The projector will detect your source automatically.

If you connect multiple sources at the same time, press the

“SOURCE” button on the control panel to switch between

inputs.

Powering On/Off the Projector

SVGA

XGA