User's Manual

ManualsBrandsLG Electronics ManualsComputers & AccessoriesWireless Mouse

Appearance

English

1. Right Button

2. Scrolling Wheel

3. Left Button

4. Low-Power-Alert LED (Orange)

5. Spare USB Power Supply Jack

6. Sensor LED (Red)

7. Upper Cover Lock

8. Receiver Link Button

9. Power Switch

Before Using

1. Install Batteries.

2. Turn the power on.

3. Pair the BTM-900 Bluetooth Mouse with your computer.

Install Batteries

Note: Please make sure that your Bluetooth software supports HID (Human

Interface Device) profile before the pairing process.

Un-lock the Upper Cover Lock.

Summary of content (5 pages)

PAGE 1
English Appearance . Right Button 2. Scrolling Wheel 3. Left Button 4. Low-Power-Alert LED (Orange) 5. Spare USB Power Supply Jack 6. Sensor LED (Red) 7. Upper Cover Lock 8. Receiver Link Button 9. Power Switch Before Using . Install Batteries. 2. Turn the power on. 3. Pair the BTM-900 Bluetooth Mouse with your computer. Note: Please make sure that your Bluetooth software supports HID (Human Interface Device) profile before the pairing process. Install Batteries . Un-lock the Upper Cover Lock.
PAGE 2
English 2. Remove the upper cover. 3. Install two AAA batteries into the BTM-900 Bluetooth Piano Mouse’s battery slot (if you had installed the batteries, please remove the old one before install the new batteries). Pairing Process - For Windows XP SP2 . Press the Pairing button on the bottom of the mouse for connection link. 2. 3. 4. 5. Open the Windows control panel, then select “Bluetooth devices”. Click “Add…” Select “My device is setup and ready to be found”, then click “Next”.
PAGE 3
English - For Mac OS X 10.2.6 or later . Press the Pairing button on the bottom of the mouse for connection link. 2. Click the Bluetooth icon n the task bar and select “Setup Bluetooth device”. 3. Click “Continue” when the “Bluetooth Setup Assistant” shows up. 4. Choose “Mouse” and then press “Continue” to the next step. 5. The “Piano BTM-900 Mouse” is found by Bluetooth, please press “Continue” to the next step. 6. Click “Continue” when the “Passkey exchange with your mouse” shows up. 7.
PAGE 4
English 3. If you want to switch buttons back to its original functional definition, please repeat the above step and step 2 for change. Spare USB Power Supply . Insert USB connector of spare USB power cable into your laptop. 2. Insert DC power connector of spare USB power cable into your BTM-900 Conserving power When the mouse batteries are running low on power, the LED light on the Mouse turns orange, and blink. To use your mouse’s Sleep mode based on the below setps: .
PAGE 5
Table OF Contents English 1 Español 5 Italiano 9 Deutsch 13 Françai 17 Russkey 21 You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. This device complies with part 15 of the FCC rules.