Owners manual
4
English
Usage Notice
Using
WARNING
If the projector is in a room that
experiences a gas leak, do not
touch the projector.
It can cause a re or a burn by a
spark.
Don’t look at laser beam directly as
it can cause eye damage!
Always open the lens door or
remove the lens cap when the
projector lamp is on.
Using
NOTES
Do not place heavy objects on top
of projector.
This may cause mechanical failure
orpersonal injury!
Take care not to impact the lens
particularly when moving the
projector.
Do not touch the lens of the
projector. It is delicate and easily
damaged.
Do not use any sharp tools on the
projector as this will damage the
casing.
In the event that an image does
not appear on the screen please
switch it off and unplug it from
the power outlet and contact your
Service Agent.
This may cause a re or an electric
shock hazard or damage to the unit!
Do not drop the projector or allow
impact shock.
This may cause mechanical failure or
personal injury!
Cleaning
WARNING
Do not use water while cleaning
the projector.
This may cause damage to the projec-
tor or an electric shock hazard.
In the unlikely event of smoke or
a strange smell from the projector,
switch it off , unplug it from the wall
outlet and contact your dealer or
service centre.
This may cause a re or an electric
shock hazard or damage to the unit!
Use an air spray or soft cloth that
is moist with a neutral detergent
and water for removing dust or
stains on the projection lens.
Cleaning
NOTES
Contact the Service
Center once a year to
clean the internal parts of
the projector.
Accumulated dust can
cause mechanical failure.
When cleaning the plastic parts such as projector case, unplug the power and wipe it
with a soft cloth. Do not use cleanser, spray water or wipe with a wet cloth. Especially,
never use cleanser (glass cleaner), automobile or industrial shiner, abrasive or wax,
benzene, alcohol etc., which can damage the product.
Use an air spray or soft cloth that is moist with a neutral detergent and water for
removing dust or stains on the projection lens.
It can cause re, electric shock or product damage (deformation, corrosion and damage).
Others
WARNING
Do not attempt to service the projector yourself. Contact your dealer or service center.
This may cause damage to the projector and could give an electric Shock as well as invalidating the warranty!
Others
NOTES
Be sure to unplug if the projector is not to be used for
a long period.
Accumulated dust may cause a re hazard or damage to
the unit!
Only use the specied type of battery.
This could cause damage to the remote control.