User guide

Installation and Configuration
15
Selecting Input Signal
1. Press the INPUT button.
2. Select an input signal using the remote control's INPUT button to connect the projector to the desired
input. You can toggle between inputs using the ＜, ＞ buttons.
ꔈ You can also select an input signal directly using the VIDEO, COMPONENT, RGB, HDMI1 and HDMI2 buttons of
the remote control.
ꔈ The connected input is displayed first.
When an image appears on the screen, check if it is in focus and fits the screen properly.
If you need to move the screen image up or down, use the lens shift dial at the top of the projec-
tor to adjust the height as shown below.
ꔈ To adjust the focus of the image, rotate the focus ring.
ꔈ To adjust the size of the image, rotate the zoom ring.
ꔈ Turn the LENS SHIFT dial left or right to adjust the projected image position up or down.
ꔈ Turning the LENS SHIFT dial with excessive force may cause damage to the projector.
Focus and Position of the Screen Image
Focus ring
Zoom ring
Lens shift dial
Input List
Video Component RGB HDMI1 HDMI2