ENGLISH OWNER’S MANUAL Micro Hi-Fi System Please read this manual carefully before operating your set and retain it for future reference. FOR THE GUARANTEE TERMS & CONDITIONS, PLEASE REFER TO INNER PAGE OF BACK COVER. CM2440DAB (CM2440DAB, CMS2440F) www.lg.com CM2440-BB_AGBRLLK_ENG_7046.
1 Getting Started 2 Getting Started Safety Information 1 CAUTION Getting Started RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Getting Started This device is equipped with a portable battery or accumulator. CAUTION: The apparatus shall not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, shall be placed on the apparatus. Disposal of your old appliance 1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. 2.
Getting Started POWER: This unit operates on a mains supply of 200 - 240V ~, 50/60Hz. 1 Getting Started LG Electronics hereby declares that this/these product(s) is/are in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC, 2004/108/EC, 2006/95/EC, 2009/125/EC and 2011/65/EU. Please contact to the following address for obtaining a copy of the DoC (Declaration of Conformity). Contact office for compliance of this product: LG Electronics Inc.
Table of Contents Table of Contents 1 Getting Started 2 6 6 6 6 7 7 8 9 10 Safety Information Unique Features Accessories Playable file Requirement – Music file requirement – Compatible USB Devices – USB device requirement Remote control Front panel Back panel 2 Connecting 25 – Displaying file information (ID3 TAG) – Turn off the sound temporarily – Auto Power Down Sound adjustment – Setting the surround mode Setting the Clock – Setting the clock through "LG Bluetooth Remote" App – Setting the alarm
Getting Started Unique Features 1 Playable file Requirement USB Direct Recording Getting Started Records music to your USB device. Music file requirement Portable In MP3/ WMA/FLAC file compatibility with this unit is limited as follows : Listens to music from your portable device. (MP3, Notebook, etc) Listens to music stored on your bluetoothe device.
Getting Started 7 Compatible USB Devices yy MP3 Player : Flash type MP3 player. yy USB Flash Drive : Devices that support USB2.0 or USB1.1. 1 Getting Started yy The USB function of this unit does not support all USB devices. USB device requirement yy Devices which require additional program installation when you have connected it to a computer, are not supported. yy Do not extract the USB device while in operation. yy For a large capacity USB, it may take longer than a few minute to be searched.
Getting Started Remote control 1 a Getting Started • • • • • • a • • • • • • • • • • • • d • • • • • • 1 : Switches the unit ON or OFF. SLEEP : Sets the system to turn off automatically at a specified time. (Dimmer : The display window will be darkened by half.) B : Opens or closes the disc tray. b c d • • • • • • b • • • • • • PRESET.FOLDER W/S : - Searches for a folder of MP3/ WMA/FLAC files.
Getting Started 9 Front panel 1 e a 1/! (Power ON/OFF) F (Function) Selects the function and input source. Y/U (skip/Search) - Searches backward or forward. - Skips to the previous/next track/file. TUNNING - / + Selects the radio stations. b c f d Getting Started a g e USB Port - Plays and records the audio files by connecting the USB device. - Plays the audio files using your USB cable for Android. f Disc tray g PORT. IN Listens to music from your portable device.
Getting Started Back panel 1 Getting Started a b c a FM/DAB ANTENNA b SPEAKERS terminal c POWER IN CM2440-BB_AGBRLLK_ENG_7046.
Connecting Connecting the speakers to the unit Attaching the speakers to the unit 11 Antenna Connection Connect the Antenna to the antenna port on the back of the unit. Be sure to extend the FM/DAB wire antenna fully. To connect the cable to the unit, press each plastic finger pad to open the connection terminals on the unit. Insert the wire and release the finger pad.
Connecting Optional Equipment Connection PORT. IN Connection Connect an output (earphone or line out) of portable device (MP3 or PMP etc) to the PORT. IN connector. USB Connection Connect the USB device (or MP3 player, etc.) to the USB port on the front of the unit. 2 Connecting ,,Note Removing the USB Device from the unit : 1. Choose a different function/mode or press Z ENTER on the remote control or I on the unit twice in a row. 2. Remove the USB device from the unit.
3 Operating Operating Basic Operations When you selects USB function, you can see messages as follows; Message CHARGE Cause Your device is not supported by AOA 2.0(Only charging). Number of This unit recognizes your USB. files ANDROID Any device is not connected to USB port. This unit recognizes your Android device as an unknown device. ,,Note Depending on the type of device, message will appear in other way. CD/ USB Operations 1. Insert the disc by pressing Bon the remote control or R on the unit.
Operating Selecting a folder 1. Press PRESET.FOLDER W/S on the remote control repeatedly until a desired folder appears. 2. Press d/M on the remote control or T on the unit to play it. The first file of folder will play. ,,Note yy USB and CD Folders/Files are recognized as below. Directory *ROOT File Deleting an MP3/WMA/FLAC file You can delete file, folder or format by pressing DELETE on the remote control. This function is supported only in stop state. (USB only) 1.
Operating Android device Operation You can enjoy the sound from your Android device through USB port. For details about Android device, refer to the Android device User Guide. 15 1. Connect Android device to the USB port by using the Android device’s cable. To stream audio from your Android device through this unit, you need : yy With Android operation system : Ver 4.1(or later) and AOA 2.0 (or later) yy With a micro USB cable ,,Note *About AOA (Android Open Accessory) 2.
Operating ,,Note yy If the connection has an error, check these problems as follows; -- Your Android device is not connected firmly. -- This unit recognizes your Android device as an unknown device. -- Your Android device is not booted. -- Check the setting of USB connection type on your Android device. yy In case of no sound from this unit, adjust the volume of your Android device. yy The charging time may vary depending on your Android device. 3 yy Some Android devices may not be charged.
Operating 17 Presetting the Radio Stations Deleting all the saved stations You can preset 50 stations for FM/DAB. Before tuning, make sure to turn down the volume. 1. Press and hold PROGRAM/MEMORY for two seconds. “CLEAR” will flash up on the display window. 1. Press FUNCTION on the remote control or F on the unit until FM/DAB appears on the display window. 2. [FM] Select the desired frequency by pressing Y/U on the unit or TUN. -/+ remote control. [DAB] Press TUN.
Operating Listening to the DAB Aligning the service names You can change the display information of the currently broadcasting DAB channel. Press DAB INFO. on the remote control repeatedly, the display changes in the following order; SERVICE -> PTY NAME -> FREQ -> DLS -> QUALITY -> ENSEMBLE Select a display mode and then press TUNING-/+, the initials of the servicename are displayed. Press SORT/SCAN on the remote control to display the sorting mode of DAB broadcastings.
Operating Other Operations Programmed Playback The program function enables you to store your favorite files from any disc or USB device. A program can contain 20 tracks/files. 1. Insert a CD or a USB and wait for it to be ordered. 2. Press PROGRAM/MEMORY on the remote control in stop state. 3. PressC/V on the remote control or Y/U on the unit to select a track/file. 5. Press d/M on the remote control or T on the unit to play the programmed music tracks/files. 6.
Operating Sound adjustment Setting the surround mode This system has a number of pre-set sound fields. You can select a desired sound mode by using SOUND EFFECT on the remote control. The displayed items for the Equalizer may be different depending on sound sources and effects. 3 Operating On Display Description AUTO EQ Sets the sound equalizer on the mode that is the most similar to the genre which is included in the MP3 ID3 tag of song files.
Operating Setting the alarm You can use the unit as an alarm clock. You have to set the clock before setting the alarm. 1. Turn the unit on. 2. Press ALARM. Each of functions flashes. 3. Press SET/RDS when the function you want to be woken by is showing. 4. “ON TIME” will be displayed. This is your desired time to the unit turns on. Press C/V on the remote control or Y/U on the unit to change the hours and minutes and press SET/RDS to save. 5.
Operating Advanced Operations Recording to USB 1. Connect the USB device to the unit. 2. Select a function by pressing FUNCTION on the remote control or F on the unit. One track recording -You can record a track/ file on USB while playing the file you want. All tracks recording - You can record tracks/ files on USB in stop state. 3 Program list recording - After making program list, you can record it on USB. (Refer to the page 19) Operating 3.
Operating 23 ,,Note yy It is not supported to record music stored on bluetooth device. • You can check the recording percentage rate for the USB record on the display window during the recording. (MP3/ WMA CD Only) • During recording MP3/ WMA/FLAC, there is no sound. • When you stop recording during playback, the file that has been recorded at that time will be stored.
Operating Listening to music stored on the Bluetooth devices Before you start the pairing procedure, make sure the Bluetooth feature is turned on in to your Bluetooth device. Refer to your Bluetooth device’s user guide. Once a pairing operation is performed, it does not need to be performed again. 1. Select the BT function by using FUNCTION on the remote control or F on the unit. "BT READY" will be on the display window. 3 Operating 2. Operate the Bluetooth device and perform the pairing operation.
Operating 25 Using Bluetooth App Activate Bluetooth with “LG Bluetooth Remote” App About “LG Bluetooth Remote” App “LG Bluetooth Remote” app helps to connect your bluetooth device to this unit. “LG Bluetooth Remote” app brings a suite of new features to this unit. To enjoy more features, you are recommended to download and install free “LG Bluetooth Remote” app. Install “LG Bluetooth Remote” App through “Google Android Market (Google Play Store)” 1.
4 Troubleshooting 26 Troubleshooting Troubleshooting Problem Cause & Correction yy The power cord is not plugged in. Plug in the power cord. No Power. yy Check whether electricity failed. Check the condition by operating other electronic devices. yy Check whether you select right function. Press FUNCTION on the remote control or F on the unit. And check the selected function. No sound. yy Speaker cables are not connect correctly. Connect the speaker cables correctly. yy The volume is set to minimum.
5 Appendix Appendix 27 Specifications General Power supply Refer to the main label. Power consumption Refer to the main label. Net Weight 2.2 kg External dimensions (W x H x D) (229 x 130 x 236) mm Operating conditions Temperature 5 °C to 35 °C (41 °F to 95 °F) Operating humidity 5 % to 85 % Inputs PORT. IN 0.7 Vrms (3.5 mm stereo jack) Tuner FM Tuning Range 87.5 MHz to 108.0 MHz or 87.50 MHz to 108.00 MHz Amplifier Output Power 50 W + 50 W T.H.
Appendix Maintenance Handling the Unit Handling Discs Never stick paper or tape on the disc. When shipping the unit Storing Discs Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight.
Warranty 29 Technology with the human touch GUARANTEE • LG Electronics U.K. Ltd. will provide the following services in order toexpedite this Guarantee. 1. All faulty components which fail due to defective manufacture will be replaced free of charge for a period of 12 months from the original date of purchase. 2.
CM2440-BB_AGBRLLK_ENG_7046.
