User manual

Operating16
Operating
3
1. Connect Android device to the USB port by
using the Android device’s cable.
2. Press FUNC. on the unit or FUNCTION on the
remote control to select USB function.
3. If your unit is connected firmly, ‘ANDROID’ will
appear in the display window.
You can operate your Android device through
an Android device’s display by using the remote
control and controlling your Android device.
To Do this
Play Press
d
/
M
.
Pause During playback, press
d
/
M
.
Skip
During playback, press
C
/
V
to go to the next le or to
return to the beginning of the
current le.
During playback, press
C
twice briey to step back to the
previous le.
When you selects USB function, you can see
messages as follows;
Message Cause
USB
Your device is not supported by
AOA 2.0(Only charging)
Number of
les
This unit recognizes your USB.
ANDROID
This unit recognizes your Android
device supported by AOA 2.0 as
known device.
NO USB
Any device is not connected to USB
port.
This unit recognizes your Android
device as an unknown device.
Depending on the type of device, Message will
appear in other way.
,
Note
CM2640-FB.DRUSLLK_3445-ENG.indd 16 2014-04-03  10:00:23