Owners manual

Operating22
Operating
3
Sleep Timer Setting
Press SLEEP on the remote control repeatedly to
select delay time between 10 and 180 minutes.
After delay time, the unit will turn o. (You can see
the following order, 180 ->150 -> 120 -> 90 -> 80
-> 70 -> 60 -> 50 -> 40 -> 30 -> 20 -> 10). To cancel
the sleep function, press SLEEP repeatedly until the
display window get bright.
• Press SLEEP. The remaining time appears in
the display window.
• Sleep function will work after dimmer
function.
,
Note
Dimmer
Press SLEEP once. The display window will
be darkened by half. To cancel it, press SLEEP
repeatedly until the display window get bright.
• After setting a clock function, you can set
alarm function.
• If you set the clock and alarm, you can check
the time and alarm icon “
(
“ by pressing
CLOCK although the unit is turned o.
• During playback, press TIMER two times
when the alarm icon “
(
“ is displayed. You
can check the setting state.
• If you activate the alarm, the alarm icon “
(
“
will appear in the display window.
• If you deactivate the alarm, the alarm icon
“
(
“ will disappear in the display window.
• Alarm function only works when the unit is
turned o.
• If the time you set is up, the unit will be
turned on automatically.
• Alarm function is not supported even if
you choose USB function as an alarm clock
when iPod/iPhone is connected to USB
port.
,
Note
Advanced Operations
Playing the iPod/iPhone
You can enjoy the sound with your iPod/iPhone.
For details about iPod/iPhone, refer to the iPod/
iPhone User Guide.
1. Connect iPod/iPhone to the USB port on the
front of the unit by using the iPod/iPhone cable.
If you turn this unit on, your iPod/iPhone will be
automatically turned on and start recharging.
2. Press FUNCTION on the remote control or
FUNC. on the unit to select USB function. You
can operate your iPod/iPhone through an iPod/
iPhone’s display by using the remote control
and controlling your iPod/iPhone.
CM4430-DE_DGBRLLK_ENG_7510.indd 22 2013-01-25  4:05:14