How to Guide

Operating26
Operating
3
USB copying
You can copy various sound source in USB 1 to
USB 2 on USB function.
1. Connect a USB device including desired sound
les to USB 1 and select USB 1 function.
2. Connect another USB device to USB 2.
3. Start the recording by pressing USB REC on the
remote control or
USB REC. on the unit.
4. To stop recording, press Z.
The making of unauthorized copies of
copy-protected material, including computer
programs, les, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights
y You can check the recording percentage rate
for the USB record on the display window
during the recording. (MP3/WMA, CD Only)
y During recording MP3/WMA, there is no sound.
y When you stop recording, the le that has
been recorded at that time will be stored.
(Except MP3/WMA les)
y Do not remove the USB device or turn off
the unit during USB recording. If does not, an
incomplete le may be made and not deleted
on PC.
y If USB recording does not work, the message
like “NO USB”, “ERROR”, “USB FULL” or “NO
REC” is displayed on the display window.
y Multi card reader device or external HDD can
not be used for USB recording.
y A le is recorded by about 512 Mbyte when
you record for a long term.
y You may not store more than 2,000 les.
y You can not record in AUTO DJ mode.
y In case of the unsupported MP3/WMA le,
the le recording may be stopped.
y It’ll be stored as follows.
AUDIO CD MP3/WMA
The other source* Tuner
*: AUX and the like.
Tuner: The current recording frequency is shown
,
Note