Owners manual

2929
•If a problem occurs check below to see whether this can be solved.
•In the unlikely event that the problem cannot be rectified, please contact a service engineer.
TROUBLE SHOOTING GUIDE
Before calling for service
Problem Possible Causes Solution
No lights come on when
the power is turned on.
• Plug is not properly inserted into the
socket.
• Fuses blown or circuit breaker tripped.
• The electricity from the house was cut off.
• Check the plug.
• Check the electricity.
• Call for service.
The control buttons don’t
be operated except the
Power button.
• Child Lock function is activated.
• Check the Child Lock
indicator.
• Press the Child Lock
button for 3 seconds to
release the Child Lock
function
The machine does not
start.
• Door is not fully closed. • Close the door.
The spray arms do not
rotate smoothly.
• The mounting of the spray arms is
blocked by food particles.
• Clean the holes of the
spray arm.
White deposits are left on
the dishwasher after
washing.
• The amount of detergent or rinse-aid set
incorrectly.
• The salt container is empty.
• The salt container cap is not securely
screwed on.
• Check the detergent or
rinse-aid.
• Check the salt
container or cap.
Streaks are left on
glassware.
• Too little Rinse-Aid dispensed.
• Fill the rinse-aid.
• Adjust the level of
rinse-aid container.
Dry results are not
satisfactory.
• Too little Rinse-Aid dispensed.
Washing results are not
satisfactory.
• Incorrect amount of detergent.
• Utensils incorrectly arranged or
overloaded.
• Filters are clogged.
• Water jet holes of spray arms blocked.
• Spray arm's rotation obstructed by
utensils.
• Unsuitable programme selected.