Owners manual
① Programme
• Press the cycle that corresponds to your desired wash cycle.
② Rinse
• Repeated pressing of the Rinse button will select Extra Hot, Rinse+, Extra Hot & Rinse+.
• If you select the Extra Hot( ) function, the operating temperature will be up to 80℃.
(Eco, Auto, Steam Care, Steam Dual Spray, Steam Power)
• When you select Rinse+( ) an additional rinse cycle is added.
③ Child Lock ( )
• Used to lock or unlock the control buttons to prevent all the settings from being changed by a child.
• To activate or release the Child Lock function, press the Child Lock button for 3 seconds while the dishwasher is
in operation.
• All controls will be disabled except the Child Lock and Power buttons.
• Turning off the dishwasher will not reset the Child Lock function. You must release the Child Lock before you can
operate the dishwasher.
④ Spray
• With each press, the level of water jet is changed to Soft ( ), Medium( ) and Strong( ) in a sequence.
(Only Steam Care and Steam Dual Spray)
⑤ Half load
• In case of small load, use upper or lower rack only to save energy.
• With each press, select Upper( ) or Lower( ) rack only. (Except Quick & Dry, Steam Power)
• In case you don’t select this button, the machine always works vario washing, which operates upper and lower spray
arm alternately.
⑥ Delay Start
• If you want to delay the start of selected programme, press this button.
• Pressing this button will increase time by 1 hour.
• The delay start time can be adjusted from 1 hour to 19 hours.
⑦ Power
• For operating, press this button first for power on.
• After operating, this button automatically switches off for safety and energy saving.
• In case of irregular surge disturbance to the machine, the power may be automatically turned off for safety.
⑧ Beep On/Off
• The dishwasher must be switched on.
• The beep on/off function can be set by pressing the Spray and Delay Start button simultaneously for a few seconds.
⑨ Steam( )
• The Steam symbol light will stay on when the Steam course has been selected.
⑩ Indicator
⑪ Time Left
• Before starting, the display window shows the running time of the selected programme.
• After starting, the display window shows the remaining time.
• If the dishwasher has a trouble, the trouble type is displayed. (OE, FE, IE, AE, HE, LE, tE)
• If these error letters are displayed, please refer to the trouble shooting guide page 30 and follow the guide.
14
FUNCTION OF CONTROL BUTTON
• Child Lock.
• Refill with special salt.
• Refill with rinse aid.