User guide

LGE Internal Use Only
-4-
Do not twist or damage the power cable.
It can cause fire and electric shock.
When repairing or installing the product, always make sure to turn off the power.
It can cause fire and electric shock.
Do not connect the polarity of the power arbitrarily.
It can damage the product or cause a safety accident.
Firmly fixate the product on the ceiling.
It can cause the product to fall down and cause an injury.
Be careful not to drop or apply impact on the product.
It can cause product failure.
When the product is turned on, do not directly stare into the lamp.
Strong light can cause visual disorder.
Do not let any alien particles penetrate into the product, and if alien particles do penetrate
into the product, remove them.
It can cause a safety accident such as electric shock and product damage.
Do not install the product where the ceiling is uneven.
It can cause the product to fall down, resulting in product damage and injury.
If the lamp goes off abnormally after the product is installed, check the product according
to the troubleshooting procedure.
Disassembling the product arbitrarily can cause electric shock.
Have two people install or repair the product if possible.
The product can fall over and cause an injury.
After installing or repairing the product, make sure that the product is installed
correctly without any gap between the exterior surface and the ceiling. If there is a gap,
rotate the product to check the gap.
After installing the product, check if there are any alien particles on the surface of the
product.
.
Do not wipe the product with flammable substance such as alcohol, benzene and acetone
that can degrade the surface of the product.
The meaning of the symbol expressed in this product and manual is as follows.
The purpose of this symbol is to gain the attention of the user on items or operations that can
cause dangerous situations. To avoid dangerous situations, please read and follow the directions
with the symbol carefully.
The purpose of this symbol is to show possible electric shock in specific conditions.
Can result in major injury or casualty (death) when the directions are violated.
Can result in minor injury or product damage when directions are violated.
Safety Precautions