ENGLISH OWNER’S MANUAL CINEMA 3D GLASSESFREE MONITOR Please read this manual carefully before operating your set and retain it for future reference. CINEMA 3D GLASSES-FREE MONITOR MODEL D2500N www.lg.
TABLE OF CONTENTS CONTENTS ENGLISH ENG 3 ASSEMBLING AND PREPARING 19 TROUBLESHOOTING 3 Unpacking 4 Parts and buttons 20 6 Lifting and moving the Monitor TROUBLESHOOTING WHEN USING 3D MODE 6 Setting Up the Monitor 6 - Attaching the Stand Base 7 - Adjusting the stand height 22 SPECIFICATIONS 7 - Adjusting the angle 23 Preset Modes (Resolution) 8 - Swivel stand 23 HDMI TIMING 8 - Detaching the stand base 23 Indicator 8 - Detaching the stand body 9 - Mounting on a table
ASSEMBLING AND PREPARING 3 ASSEMBLING AND PREPARING Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. CD(Owner's Manual) / Card TriDef 3D software Program CD / Quick Installation Guide Power Cord Stand Base DVI-D Cable (In some countries, this accessory may not be provided.
ASSEMBLING AND PREPARING Parts and buttons ENGLISH ENG Power Indicator yyLight On: Turned on yyLight Off: Turned off Head-tracking camera (Power Button) 3D 3D Button (See p.15) AC-IN DVI-D HDMI-IN Connection panel (See p.
ASSEMBLING AND PREPARING Button Description Accesses the main menus.(See p.16) OSD LOCKED/ UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for several seconds. The message "OSD LOCKED" should appear. You can unlock the OSD controls at any time by pushing the MENU button for several seconds. The message "OSD UNLOCKED" should appear.
ASSEMBLING AND PREPARING ENGLISH ENG Lifting and moving the Monitor Please heed the following information when moving the monitor. CAUTION yyAvoid touching the screen at all times, as this may result in damage to the screen or pixels . Setting Up the Monitor Attaching the Stand Base 1 Place the monitor's screen face down. CAUTION To protect the screen from scratches, cover yy the surface with a soft cloth.
ASSEMBLING AND PREPARING Adjusting the angle 1 Place the monitor mounted on the stand base 1 Place the monitor mounted on the stand base 2 Remove the tape attached at the bottom rear 2 Adjust the angle of the screen. The angle of in an upright position. of the stand body, then pull out the locking pin. in an upright position. the screen can be adjusted up to 20° forwards and 5° backwards for a comfortable viewing experience.
ASSEMBLING AND PREPARING Swivel stand CAUTION ENGLISH ENG 1 Swivel 45 degrees and adjust the angle of the Monitor to suit your view. The components appearing in the illustrations yy may look different from the actual product. Do not carry the monitor upside-down as this yy may cause it to fall off its stand, resulting in damage or injury. To avoid damaging the screen when lifting yy or moving the monitor, only hold the stand or the plastic cover.
ASSEMBLING AND PREPARING Mounting on a table Using the Kensington security system on a table. Leave a 10 cm (minimum) space from the wall for proper ventilation. The Kensington security system connector is located at the back of the Monitor. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com . Connect the Kensington security system cable between the Monitor and a table.
ASSEMBLING AND PREPARING Mounting on a wall 5 Please use VESA standard as below. ENGLISH ENG For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. 784.8 mm (30.9 inch) and under yy * Wall Mount Pad Thickness : 2.6 mm * Screw : Φ 4.0 mm x Pitch 0.7 mm x Length 10 mm 787.4 mm (31.
ASSEMBLING AND PREPARING 11 CAUTION NOTE Only use screws that are listed on the VESA yy standard screw specifications. The wall mount kit will include an installation yy manual and necessary parts. The wall mount bracket is optional. You can yy obtain additional accessories from your local dealer. The length of screws may differ depending yy on the wall mount. Be sure to use the proper length. For more information, refer to the yy instructions supplied with the wall mount.
USING THE MONITOR SET USING THE MONITOR ENGLISH ENG Connecting to a PC Your Monitor supports Plug & Play*. yy *Plug & Play: This is the function that allows a PC to use the monitor without installing a driver. DVI-D connection HDMI connection Transmits the digital video and audio signals from your PC or A/V to the Monitor. Connect the PC or A/V and the Monitor with the HDMI cable as shown in the following illustrations.
USING THE MONITOR SET Your Monitor supports Plug & Play*. yy *Plug & Play: This is the function that allows a PC to use the monitor without installing a driver. HDMI connection Transmits the digital video and audio signals from your PC or A/V to the Monitor. Connect the PC or A/V and the Monitor with the HDMI cable and USB cable as shown in the following illustrations. When the HDMI cable is connected, you can listen to sound through headphones, earphones or an external speaker.
USING THE MONITOR SET CAUTION ENGLISH ENG Connect the signal input cable yy and tighten it by turning the screws clockwise. Do not press the screen with your yy finger for a long time as this may result in temporary distortion on the screen. Avoid displaying a fixed image on the yy screen for a long period of time to prevent image burn. Use a screensaver if possible. NOTE When you want to use two PC in our Monitor, yy please connect the signal cable(DVI-D/ HDMI) respectively in Monitor.
CUSTOMIZING SETTINGS 15 CUSTOMIZING SETTINGS ENG ENGLISH Accessing The Main Menus 1 Press any button on the front of the Monitor to display the MONITOR SETUP OSD menu. 2 Press the desired menu item. 3 Change the value of the menu item by pressing the buttons on the front of the Monitor. To return to the upper menu or set other menu items, use the up arrow ( ) button. 4 Select EXIT to leave the OSD menu. 3D Monitor Buttons MENU (See p.16) Sets the screen options. 3D (See p.18) Sets the 3D mode.
CUSTOMIZING SETTINGS Customizing Settings ENGLISH ENG Menu Settings MENU 1 Press any button on the front of the Monitor to display the BRIGHTNESS ORIGINAL RATIO 3D COLOR EFFECT COLOR TEMP PRESET RED GREEN BLUE CONTRAST BLACK LEVEL VOLUME LANGUAGE FACTORY RESET MONITOR SETUP OSD menu. 2 Press the MENU button to display the options in the OSD menu. 3 Set the options by pressing the buttons on the front of the Monitor. 4 Select EXIT to leave the OSD menu.
CUSTOMIZING SETTINGS SUPER ENERGY SAVING Settings 17 SUPER ENERGY SAVING ENG ENGLISH 1 Press any button on the front of the Monitor to display the MONITOR SETUP OSD menu. ON 2 Press the MENU button to display the options in the OSD menu. 3 Select SUPER ENERGY SAVING by pressing the buttons on the front of the Monitor and set the options. OFF RESET SUPER SAVING : 5 W/h TOTAL POWER REDUCTION: 20 W LED SAVING : 12 W/h TOTAL CO2 REDUCTION: 16 g 4 Select EXIT to leave the OSD menu.
CUSTOMIZING SETTINGS Things you need to check before installing TriDef 3D ENGLISH ENG Before you install the TriDef 3D program, connect the Glasses Free 3D monitor to your PC and yy reboot. If you are using two monitors or connecting a monitor to your laptop, set the LG 3D monitor yy as the default one and change the resolution to 1920 x 1080 to support the 3D function. Windows Media Player 11 is required for Windows XP to play 3d Movies.
TROUBLESHOOTING 19 Check the following before calling for service. No image appears Is the power cord of the display connected? yy Check and see if the power cord is connected properly to the power outlet. Is the power indicator light on? yy Press the Power button. Is the power indicator flickering? yy If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen. yy Try to turn on the PC.
TROUBLESHOOTING Display image is incorrect ENGLISH ENG Does the display color appear discolored (16 color)? yy Set the color to 24 bit (true color) or higher. In Windows, go to Control Panel > Display > Settings > Color Quality. The screen color is mono or abnormal. yy Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. yy Make sure the video card is properly inserted in the slot.
TROUBLESHOOTING 21 I cannot see 3D but only 2D images. If the ‘TriDef 3D’ couldn’t work properly yy TriDef 3D needs the following minimum system requirements to function properly.
SPECIFICATIONS ENGLISH ENG SPECIFICATIONS Display Screen Type Sync Input Pixel Pitch Horizontal Frequency Vertical Frequency 63.44 cm (25 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 63.44 cm 0.096 mm x 0.288 mm (Pixel Pitch) 30 kHz to 83 kHz (Automatic) 56 Hz to 75 Hz (DVI-D) 56 Hz to 61 Hz (HDMI) Separate Sync.
SPECIFICATIONS 23 Preset Modes (Resolution) Horizontal Frequency(kHz) Vertical Frequency(Hz) Polarity(H/V) 720 x 400 31.468 70.080 -/+ 640 x 480 31.469 59.940 -/- 640 x 480 37.500 75.000 -/- 800 x 600 37.879 60.317 +/+ 800 x 600 46.875 75.000 +/+ 1024 x 768 48.363 60.000 -/- 1024 x 768 60.023 75.029 +/+ * 1152 x 864 67.500 75.000 +/+ * 1280 x 1024 63.981 60.020 +/+ 1280 x 1024 79.976 75.035 +/+ 1680 x 1050 65.290 59.954 -/+ 1920 x 1080 67.500 60.
PRECAUTIONS TO TAKE WHEN VIEWING 3D IMAGES SAFETY PRECAUTIONS ENGLISH ENG Precautions to take when viewing 3D images If you view 3D images from too close a distance, your eyesight may deteriorate. If you view images in 3D for a long period of time, you may feel dizzy or experience blurred vision. If you are pregnant, elderly, have heart problems, experience severe nausea or if you are under the influence of alcohol, we recommend that you do not view 3D images.
PROPER POSTURE 25 ENG ENGLISH PROPER POSTURE Proper posture for using the Monitor. Adjust your distance from the Monitor to allow you to view images from the optimal viewing distance (L). Adjust the Monitor and your posture to allow you to view images at the optimal viewing angle (D). Adjust the location of the Monitor to avoid it reflecting light. Place your hands gently on the keyboard, keeping your arms bent at the elbows and horizontally outright.
LICENSES LICENSES ENGLISH ENG Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
Make sure to read the Safety Precautions before using the product. Keep the Owner’s Manual (CD) in an accessible place for future reference. The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service. MODEL SERIAL ENERGY STAR is a set of power-saving guidelines issued by the U.S.Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc.
