ENGLISH OWNER’S MANUAL CINEMA 3D MONITOR Please read this manual carefully before operating your set and retain it for future reference. CINEMA 3D MONITOR MODEL D2242P D2342P D2542P www.lg.
TABLE OF CONTENTS CONTENTS ENGLISH ENG 3 ASSEMBLING AND PREPARING 23 SAFETY PRECAUTIONS 3 Unpacking 4 Parts and buttons 24 PROPER POSTURE 6 Setting up the Monitor set 24 Proper posture for using the Monitor set.
ASSEMBLING AND PREPARING 3 ASSEMBLING AND PREPARING Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. CD(Owner's Manual) / Card TriDef 3D software Program CD / Quick Installation Guide Power Cord Stand Body D-SUB Cable (This signal cable may be attached to this product before shipping out.
ASSEMBLING AND PREPARING Parts and buttons ENGLISH ENG Power Indicator yyLighting On: Turned on yyLighting Off: Turned off (Power Button) Button (See p.12) AC-IN/ 䔜㹷彺⅌ D-SUB DVI-D HDMI Connection panel (See p.
ASSEMBLING AND PREPARING Button Description Accesses the main menus.(See p.13) OSD LOCKED/ UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for several seconds. The message "OSD LOCKED" should appear. You can unlock the OSD controls at any time by pushing the MENU button for several seconds. The message "OSD UNLOCKED" should appear.
ASSEMBLING AND PREPARING ENGLISH ENG Setting up the Monitor set Detaching the Stand Base and Body Attaching the Stand Base 1 Place the Monitor set with the screen side 1 Place the Monitor set with the screen side 2 Pull out the Stand Base and Stand Body from down on a flat and cushioned surface. down on a flat and cushioned surface. the Monitor set. CAUTION Lay a foam mat or soft protective cloth on the surface to protect the screen from damage.
ASSEMBLING AND PREPARING Mounting on a table 7 WARNING position on a table. Leave a 10 cm (minimum) space from the wall for proper ventilation. When you adjust the angle, do not hold the bottom of the Monitor set frame as shown on the following illustration, as may injure your fingers. 10 cm 10 cm 10 cm 10 cm Do not touch or press the screen when adjusting the angle of the monitor. 2 Connect the Power Cord to a wall outlet.
ASSEMBLING AND PREPARING Using the Kensington security system ENGLISH ENG The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com . Mounting on a wall For proper ventilation, allow a clearance of 10 cm on each side and from the wall.
ASSEMBLING AND PREPARING D2242P D2342P D2542P VESA (A x B) Standard screw Number of screws Wall mount bracket (optional) 75 x 75 M4 4 RW120 200 x 100 M4 4 RW240 CAUTION Disconnect the power cord first, and then yy move or install the Monitor set. Otherwise electric shock may occur. If you install the Monitor set on a ceiling or yy slanted wall, it may fall and result in severe injury. Use only an authorized LG wall mount yy and contact the local dealer or qualified personnel.
USING THE MONITOR SET USING THE MONITOR SET ENGLISH ENG Connecting to a PC DVI-D connection Your Monitor set supports Plug & Play*. yy *Plug & Play: A PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention. Transmits a digital video signal from your PC to the Monitor set. Connect the PC and the Monitor set with a DVI cable as shown in the following illustrations.
USING THE MONITOR SET CAUTION NOTE When you want to use two PC in our Monitor, yy please connect the signal cable(D-SUB/ DVI-D/HDMI) respectively in Monitor set. If you turn the Monitor set on while it is cold, yy the screen may flicker. This is normal. Some red, green, or blue spots may appear yy on the screen. This is normal. Self Image Setting Function Press the power button on the front panel to turn the power on.
CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS ENGLISH ENG Accessing The Main Menus 1 Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu. 2 Press the desired menu item. 3 Change the value of the menu item by pressing the buttons on the front of the Monitor set. To return to the upper menu or set other menu items, use the up arrow ( ) button. 4 Select EXIT to leave the OSD menu. Monitor set Buttons MENU (See p.13) Sets the screen options. AUTO (See p.
CUSTOMIZING SETTINGS Customizing Settings MENU 1 Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu. 2 Press the MENU button to display the options in the OSD menu. 3 Set the options by pressing the buttons on the front of the Monitor set. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button.
CUSTOMIZING SETTINGS Things you need to check before installing TriDef 3D ENGLISH ENG Before you install the TriDef 3D program, connect the LG 3D monitor to your PC and reboot. yy If you are using two monitors or connecting a monitor to your laptop, set the LG 3D monitor yy as the default one and change the resolution to 1920*1080 to enable the 3D function. To run a TriDef Movie file on Windows XP, you must install Windows Media Player 11 for yy Windows XP.
CUSTOMIZING SETTINGS Volume Settings (Only supported in HDMI) 15 VOLUME MONITOR SETUP OSD menu. 50 2 Press the VOLUME button to display the options in the OSD menu. EXIT 3 Set the options by pressing the buttons on the front of the Monitor set. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button.
TROUBLESHOOTING ENGLISH ENG TROUBLESHOOTING Check the following before calling for service. No image appears Is the power cord of the display connected? Is the power indicator light on? Is the power on and the power indicator blue or green? Is the power indicator flickering? Do you see an "OUT OF RANGE" message on the screen? Do you see a "CHECK SIGNAL CABLE" message on the screen? yy Check and see if the power cord is connected properly to the power outlet. yy Press the Power button.
TROUBLESHOOTING 17 CAUTION Display image is incorrect The screen color is mono or abnormal. The screen blinks. yy Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. yy Make sure the video card is properly inserted in the slot. yy Set the color setting higher than 24 bits (true color) at Control Panel ► Settings. yy Check if the screen is set to interlace mode and if yes, change it to the recommend resolution.
TROUBLESHOOTING ENGLISH ENG TROUBLESHOOTING WHEN USING 3D MODE I can see a swirling oil-like pattern on the monitor when the monitor is turned off. yy This is caused by the interference of external light in the air layer between the LCD surface and 3D filter. The pattern becomes almost invisible when you turn on the power again. I cannot see 3D image properly yy When you view 3D images with this monitor, it is very important that you use the glasses provided with the monitor.
SPECIFICATIONS Display Screen Type Weight 3.0 kg Tilt Range -5° to 18° Environmental conditions Operating Temperature 10°C to 35 °C Operating Humidity 10 % to 80 % Storage Temperature -20°C to 60 °C Storage Humidity 5 % to 90 % non-Condensing Attached ( ), Detached (O) Wall-outlet type D2242P 54.6 cm (21.5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 54.6 cm Pixel Pitch 0.248 mm x 0.
SPECIFICATIONS ENGLISH ENG SPECIFICATIONS Display Screen Type Weight 3.5 kg Tilt Range -5° to 18° Environmental conditions Operating Temperature 10°C to 35 °C Operating Humidity 10 % to 80 % Storage Temperature -20°C to 60 °C Storage Humidity 5 % to 90 % non-Condensing Attached ( ), Detached (O) Wall-outlet type D2342P 58.4 cm (23 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 58.4 cm Pixel Pitch 0.265 mm x 0.
SPECIFICATIONS Display Screen Type Weight 4.4 kg Tilt Range -5° to 18° Environmental conditions Operating Temperature 10°C to 35 °C Operating Humidity 10 % to 80 % Storage Temperature -20°C to 60 °C Storage Humidity 5 % to 90 % non-Condensing Attached ( ), Detached (O) Wall-outlet type D2542P 63.4 cm (25 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 63.4 cm Pixel Pitch 0.288 mm x 0.
SPECIFICATIONS Preset Modes (Resolution) ENGLISH ENG Display Modes (Resolution) Horizontal Frequency(kHz) Vertical Frequency(Hz) Polarity(H/V) 720 x 400 31.468 70 -/+ 640 x 480 31.469 60 -/- 640 x 480 37.500 75 -/- 800 x 600 37.879 60 +/+ 800 x 600 46.875 75 +/+ 1024 x 768 48.363 60 -/- 1024 x 768 60.123 75 +/+ 1152 x 864 67.500 75 +/+ 1280 x 1024 63.981 60 +/+ 1680 x 1050 65.290 60 -/+ 1920 x 1080 67.
PRECAUTIONS TO TAKE WHEN VIEWING 3D IMAGES 23 SAFETY PRECAUTIONS If you view 3D images from too close a distance, your eyesight may deteriorate. If you view images in 3D for a long period of time, you may feel dizzy or experience blurred vision. If you are pregnant, elderly, have heart problems, experience severe nausea or if you are under the influence of alcohol, we recommend that you do not view 3D images. This is because the 3D images can cause disorientation and confusion.
PROPER POSTURE ENGLISH ENG PROPER POSTURE Proper posture for using the Monitor set. 50 cm to 90 cm Adjust your distance from the Monitor set to allow you to view images from the optimal distance (L). Adjust the Monitor set and your posture to allow you to view images at the optimal viewing angle (D). Adjust the location of the Monitor set to avoid it reflecting light. Place your hands gently on the keyboard, keeping your arms bent at the elbows and horizontally outright.
Make sure to read the Safety Precautions before using the product. Keep the Owner’s Manual (CD) in an accessible place for future reference. The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service. MODEL SERIAL ENERGY STAR is a set of power-saving guidelines issued by the U.S.Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc.
