OPERATION 31 OPERATION A. WARNING « To reduce the risk of fire, electric shock, or injury to persons, read the SAFETY INSTRUCTIONS before operating this appliance. Using the Dryer 4 Clean the Lint Filter If the lint filter has not already been cleaned, lift out the filter and remove the lint from the last load. This will help ensure the fastest and most efficient drying performance. Make sure to reinstall the filter, pressing down until it clicks firmly into place.
32 OPERATION Check the Lint Filter Before Every Load Always make sure the lint filter is clean before starting a new load; a clogged lint filter will increase drying time. To clean, pull the lint fitter straight up and roll any lint off the filter with your fingers. Push the lint filter firmly back into place. See Regular Cleaning for more information. Always ensure the lint filter is properly installed before running the dryer.
OPERATION 33 Control Panel Non-Steam Models (DLE3400*, DLG3401%) saxophone Normal —— Delicate Perm. Press. MANUAL DRY Speed Dry Air Dry M 1 « Press the button to turn the dryer ON. Press again to tum the dryer OFF. I NOTE + Pressing the Power button during a cycle will cancel that cycle and any load settings will be lost. @ Cycle Selector Knob Tum this knob to select the desired cycle. Once the desired cycle has been selected, the standard presets will be shown in the display.
34 OPERATION oe | Clean Very « High « 60 min « Normal « Medium 40 « Damp « Low 20 Dry Level Time Di eon) Temp. *Damp Dry pth ® o @ Clean Liter Reminder The Clean Filter LED is lit when the dryer is muted on as a reminder to clean the filter. It tums off when the START/PAUSE button is pressed. Flow Sense Duct Blockage Sensing System Indicator The Flow Sense™ duct blockage sensing system detects and alerts you to blockages in the duct work that reduce exhaust flow from the dryer.
OPERATION 35 Cycle Guide Sensor Dry Cycles Sensor Dry cycles utilize LG's unique dual sensor system to detect and compare the moisture level in clothes and in the air and adjust the drying time as needed to ensure superior results. The dryer automatically sets the dryness level and temperature at the recommended setting for each cycle. The estimated time remaining will be shown in the display.
36 OPERATION Cycle Modifier Buttons Sensor Dry cycles have preset settings that are selected automatically Manual Dry cycles have default settings, but you may also customize the settings using the cycle modifier buttons. Press the button for that option to view and select other settings. Dry Laval Use this button to select the level of dryness for the cycle. Press the Dry Level button repeatedly to scroll through available settings. + This option is only available with Sensor Dry cycles.
OPERATION 37 Special Functions Some cycle option buttons also activate secondary functions. These special functions are marked with an asterisk Press and hold the option button marked with the special function to activate it Control Lock Use this option to prevent unwanted use of the dryer or to keep cycle settings from being changed while the dryer is operating. Activating the Control Lock Function Press and hold the Wrinkle Care button for 3 seconds.
38 SMART FUNCTIONS SMART FUNCTIONS LG Thin Q Application Installing the LG Thin Q Application Search for the LG Thin Q application from the Google Play Store or Apple App Store on a smartphone. Follow instructions to download and install the application. LG Thin Q Application Features + Smart Diagnosis™ — This function provides useful information for diagnosing and solving issues with the appliance based on the patter of use.
MAINTENANCE 38 MAINTENANCE Regular Cleaning A), WARNING « Unplug the dryer before cleaning. « Never use harsh chemicals, abrasive cleaners, or solvents to clean the washer. They will damage the finish. Cleaning the Exterior Proper care of your dryer can extend its life. The outside of the machine can be cleaned with warm water and a mild, nonabrasive household detergent. Immediately wipe off any spills with a soft, damp cloth. I NOTE + Do not use mentholated spirits, solvents, or similar products.
40 MAINTENANCE 3 If the lint filter has become very dirty or clogged with fabric softener, wash the lint filter in warm, soapy water and allow it to dry thoroughly before reinstalling. = NOTE + NEVER operate the dryer without the lint filter in place.