Full Product Manual
Table Of Contents
7
SAFETY INSTRUCTIONS
GROUNDING INSTRUCTIONS
WARNING
Improper connection of the equipment-grounding conductor may result in a risk of electric shock.
Checkwithaqualifiedelectricianorservicepersonifyouareindoubtthattheapplianceisproperly
grounded.
•
This appliance must be grounded.
In the event
of malfunction or breakdown, grounding will reduce
the risk of electric shock by providing a path of least
resistance for electric current.
•
This appliance must be equipped with a cord
havinganequipment-groundingconductorand
a grounding plug.
The plug must be plugged into
an appropriate outlet that is properly installed and
grounded in accordance with all local codes and
ordinances.
•
Do not modify the plug.
If it will not fit the outlet,
have a proper outlet installed by a qualified
electrician.
•
This appliance must be connected to a
grounded metal, permanent wiring system or
an equipment-grounding conductor must be
run with the circuit conductors and connected
to the equipment-grounding terminal or lead
on the appliance.
Electric shock may result if the
dryer is not properly grounded.
•
The dryer should always be plugged into its
ownindividualelectricaloutletwhichhasa
voltageratingthatmatchestheratingplate.
This
provides the best performance and also prevents
overloading house wiring circuits which can cause
a fire hazard from overheated wires.
•
Neverunplugthedryerbypullingonthepower
cord. Always grip the plug firmly and pull
straight out from the outlet.
The power cord may
be damaged, resulting in a risk of fire and electric
shock.
•
Repair or replace immediately all power
cordsthathavebecomefrayedorotherwise
damaged. Do not use a cord that shows cracks
or abrasion damage along its length or at either
end.
The power cord may melt, creating electric
shock and/or fire hazard.
•
Wheninstallingormovingthedryer,becareful
not to pinch, crush, or damage the power cord.
This will prevent injury and damage to the dryer
from fire and electric shock.
•
Do not, under any circumstances, cut or
removethegroundprongfromthepowercord.
To prevent personal injury or damage to the dryer,
the electrical power cord must be plugged into a
properly grounded outlet.
•
For personal safety, this dryer must be properly
grounded.
Failure to do so may result in electric
shock or injury.
•
Refer to the installation instructions in this
manual for specific electrical requirements for
your model.
Failure to follow these instructions
may create an electric shock hazard and/or a fire
hazard.
•
This dryer must be plugged into a properly
grounded outlet. Electrical shock may result if
thedryerisnotproperlygrounded.Havethe
wall outlet and circuit checked by a qualified
electrician to make sure the outlet is properly
grounded.
Failure to follow these instructions
may create an electric shock hazard and/or a fire
hazard.