OPERATION 31 OPERATION WARNING «To reduce the risk of fire, electric shock, or injury to persons, read the SAFETY INSTRUCTIONS before operating this appliance. MONARCHS Using the Dryer 4 Clean the Lint Liter If the lint filter has not already been cleaned, lift out the filter and remove the lint from the last load. This will help ensure the fastest and most efficient drying performance. Make sure to reinstall the filter, pressing down until it clicks firmly into place.
32 OPERATION Check the Lint Filter Before Every Load Always make sure the lint filter is clean before starting a new load; a clogged lint filter will increase drying time. To clean, pull the lint filter straight up and roll any lint off the filter with your fingers. Push the lint fitter firmly back into place. See Regular Cleaning for more information. Always ensure the lint filter is properly installed before running the dryer.
OPERATION 33 Control Panel Non-Steam Models (DLE3600, DLG3601%) ‘sensor DRY Normal Hea Duty Bedding Small Load — | Towels Delicate Perm Press MANUAL DRY | Snead Dry Already — Downloaded ° Steam Models (DLEX4000*, DLGX4001*) SEAMLESS £ SOR ey Normal —— Delicate Heavy Duty Perm Press Bedding es Antibacterial — | Speed Dry Steam Santary™ Steam Fresh™ Steam Models (DLEX4200*, DLGX4201*, DLEX4500*, DLGX4501") Steam Sanitary™ ©) Frest™ _\ {Downloaded STEAM CYCLE & SENSOR DRY [I p— —— Delicate Heavy Duty Perm.
34 OPERATION @ Power Button Press the button fo tum the dryer ON. Press again to tum the dryer OFF. NOTE «Pressing the Power button during a cycle will cancel that cycle and any load settings will be lost. @ Cycle Selector Knob Tum this knob to select the desired cycle. Once the desired cycle has been selected, the standard presets will be shown in the display. On Manual Dry cycles, these settings can be adjusted using the cycle modifier buttons anytime before starting the cycle.
OPERATION 35 DLEX4200", DLGX4201* DLEX4000%, DLGX4001* DLEX4500*, DLGX4501* @ Al Sensor DRY Indicator »Al Sensor Dry optimizes drying times and temperatures by detecting the laundry's characteristics. » The indicator lights up when the Normal cycle is selected with the Normal dry level, except when the Energy Saver option is tuned on. Control Lock Indicator When Control Lock is set, the Control Lock indicator appears and all buttons are disabled except the POWER button.
38 OPERATION Cycle Guide Sensor Dry Cycles Sensor Dry cycles utilize LG's unique dual sensor system to detect and compare the moisture level in clothes and in the air and adjust the drying time as needed to ensure superior results. The dryer automatically sets the dryness level and temperature at the recommended setting for each cycle. The estimated time remaining will be shown in the display. NOTE + To protect your garments not every dryness level, temperature, or option is available with every cycle.
OPERATION 37 Non-Steam Models (DLE3600~, DLG3601*) = default setting ® = allowable option * = Energy Saver on by default Wrinkled | Pump Dy Cycle Fabric Type Dry Level Tom) Signal SENSOR DRY Work clothes, Normal: | Med. High (between Normal corduroys, etc Ad Medium and High) . . Heavy Jeans, heavyweight Normal © : High Duty items Comforters, Pillows, Normal _ Bedding Shirts Ad Medium Denim, towels, heavy Nasal. | Med. High (between Towels cottons Ad. Medium and High) . .
38 OPERATION Steam Models {DLEX4000*, DLGX4001*) = default setting ® = allowable option * = Energy Saver on by default Damp Dry | Reduce Cycle Fabric Type or rem | Wrinkle Care Signal Sic SENSOR DRY Nona! Med. High Work clothes, (between Normal corduroys, etc. Adj. Medium and * * High) Jeans, heavyweight | Normal . Heavy Duty items Ad. High 3 . Comforters, pillows, | Normal _ Bedding shirts Ad. Medium Do not use this cycle Antibacterial | i, delicate fabrics | YOY High Permanent press, | Nasal . Perm.
OPERATION 38 Steam Models (DLEX4200*, DLGX4201*, DLEX4500*, = default setting DLGX4501%) ® = allowable option * = Energy Saver on by default SENSOR DRY Normal Med. High Work clothes, (between Norma corduroys, etc. Adj Medium and . * * High} Heavy Duty Jeans, heavyweight | Normal High items Adj. : Comforters, pillows, {Normal ; Bedding shirts Adi Medium . Only normal & cotton/ | Normal Small Load | towels fabric type (Max High . 3b) Adj.
40 OPERATION Cycle Modifier Buttons Sensor Dry cycles have preset settings that are selected automatically. Manual Dry cycles have default settings, but you may also customize the settings using the cycle modifier buttons. Press the button for that option to view and select other settings. Dry Level Usa this button to select the level of dryness for the cycle. Press the Dry Level button repeatedly to scroll through available settings. + This option is only available with Sensor Dry cycles.
OPERATION 41 Special Functions Some cycle option buttons also activate secondary functions. These special functions are marked with an asterisk Press and hold the option button marked with the special function to activate it. Control Lock Use this option to prevent unwanted use of the dryer or to keep cycle settings from being changed while the dryer is operating. Activating the Control Lock Function Press and hold the below button(s) for 3 seconds.
42 OPERATION The Steam Options The Reduce Static option injects steam late in the drying cycle to reduce the static electricity caused by dry fabrics rubbing together. NOTE + When Sensor Dry is selected with the Reduce Static option, the dry levels below Normal cannot be selected. +The Reduce Static option can also be selected during Time Dry cycles. «After the Steam option is selected in Time Dry, the More Time or Lass Time buttons will change the steam time ONLY.
OPERATION 43 Steam Cycle Guide = default setting ® = allowable option Default Dry Fabric Fabric Maximum Time Laval State Type Amount Comforter Single o Bedding {1 each) 31 minutes High Dry Children’s 2 lbs. clothing Med: High (between Single Steam . Medium and Comforter 1 each Frogh™ 10 minutes High) Dry { } Adj Shirts 5 each Follows Varies by Reduce | Selected . wet seceded | Jb Steam Cycle cycle Option Follows Varies by aim | Selected .
44 SMART FUNCTIONS SMART FUNCTIONS LG Thin Q Application The LG Thin Q application allows you to communicate with the appliance using a smartphone. Before Using LG Thin Q 4 Use a smartphone to check the strength of the wireless router (WI-Fi network) near the appliance. « If the distance between the appliance and the wireless router is too far, the signal strength becomes weak. It may take a long time to register or installation may fail. i Turn off the Mobile data or Cellular Data on your smartphone.
SMART FUNCTIONS 45 LG Thin Q Application Features Dryer Cycle Download new and specialized cycles that are not included in the standard cycles on the appliance. Appliances that have been successfully connected can download a variety of specialty cycles specific to the appliance. Only one cycle can be stored on the appliance at a time. Once cycle download is completed in the appliance, the appliance keeps the downloaded cycle until a new cycle is downloaded. Venting Tips Provides venting tips.
46 SMART FUNCTIONS Wireless LAN Module Specifications Modal CW-004 Frequency Range 2412 to 2462 MHz Output Power (Max) < DBMS FCC Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These || are designed to provide reasonable protection against harmful interference in a residential installation.
SMART FUNCTIONS 47 Smart Diagnosis™ Function This feature is only available on models with the & or & logo Use this feature to help you diagnose and solve problems with your appliance. NOTE + For reasons not attributable to LG's negligence, the service may not operate due to external factors such as, but not limited to, WI-Fi unavailability, WI-Fi disconnection, local app store policy, or app unavailability.
48 MAINTENANCE MAINTENANCE Regular Cleaning WARNING To reduce the risk of fire, electric shock, injury to persons, or death when using this appliance, follow basic precautions, including the following: « Unplug the dryer before cleaning. «Never use harsh chemicals, abrasive cleaners, or solvents to clean the washer. They will damage the finish. Cleaning the Exterior Proper care of your dryer can extend its life.