User's Manual

menu. And if the Lock Code is not correct, the process will return to the Main Menu.
1. Lock Phone ( F [MENU]-7-1 )
Set the terminal lock function to either “Off” or “Lock Now” with the direction key.
2. Restriction ( F [MENU]-7-3 )
This service enables restriction on the call service. Select either “Off” or “Outgoing” with the
direction key. Select “Outgoing”, then the call service will be restricted only to the phone
numbers stored in the Entries from 1to 9 and to the emergency phone numbers. However, call
termination is available.
3. Clear Callinfo (F [MENU]-7-5 )
This service enables clearing of all the call information in the Memory. Select either “Ok” or
“Cancel” with the direction key. Select “Ok”, then a message will appear on the LCD to
confirm the command before the service clears the information. Select “Yes” to clear the
information requested.
4. Erase PB (Erase Phone Book) ( F [MENU]-7-4 )
This service enables erasing of all the information in the Phone Book. Select either “Ok” or
“Cancel” with the direction key. Select “Ok”, then a message will appear on the LCD to
confirm the command before the service erases the information. Select “Yes” to erase the
information requested.
5. Emergency # ( F [MENU]-7-5 )
This service enables entering of the emergency phone numbers up to three.
It has three items of “View”, “Add” and “Erase All” as the Submenu. Select “View” to view
the emergency phone numbers. If the memory address is empty, the message “Empty” will be
indicated. Select “Add”, enter the phone number requested and then select the Soft Key
(SAVE) on the left, to add the emergency phone numbers. Enter the memory address when a
message appears to request the memory address on the following image, and then press the
Soft Key (Save) on the left to store it. Select “Erase All” to erase all the emergency phone
numbers. Then, a message will appear to confirm the command. Select the Soft Key (YES)
on the left to erase all the emergency phone numbers.
6. New Code ( F [MENU]-7-6 )
This service enables replacing of the present terminal Lock Code in four digits with a new
Lock Code. A message will appear to confirm the command to change the lock code.
7. Send PIN ( F [MENU]-7-7 )
This service enables automatic transmission of the password at the request of the service
provider. Select either “Yes” or “No” with the direction key.