DP281B-P_AA3GLLW_ENG Portable DVD Player Owner’s Manual Model: DP281B Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely.
Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: This product employs a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. Should the unit require maintenance, contact an authorized service center. Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure.
Safety Precautions (continued) Most appliances recommend they be placed upon a dedicated circuit; That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Disposal of your old appliance 1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. 2.
Contents Playing an Audio CD or MP3/WMA file . . . . . . . . . . . . . . . . . . . . . . . 28 Programmed Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Repeat Programmed Tracks . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Erasing a Track from Program List. . . . . . . . . . . . . . . . . . . . . . . . 29 Erasing the Complete Program List . . . . . . . . . . . . . . . . . . . . . . . 29 Viewing a JPEG file . . . . . . . . . . . . . . . . . . . . . . . . . . .
Before Use Notes on Discs Handling Discs Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints do not get on the surface. Never stick paper or tape on the disc. This manual provides information on the operation and maintenance of your unit. Should the unit require service, contact an authorized service location.
Before Use (continued) Maintenance and Service Maintaining the Unit Refer to the information in this chapter before contacting a service technician. The DVD player is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality could be diminished. Handling the Unit Depending on the operating environment, regular inspection and maintenance are recommended after every 1,000 hours of use.
Before Use (continued) DVD (8 cm / 12 cm disc) Video CD(VCD) (8 cm / 12 cm disc) Regional Code Audio CD (8 cm / 12 cm disc) This unit has a regional code printed on the rear of the unit. This unit can play only DVD discs labelled same as the rear of the unit or “ALL”. In addition, this unit plays DVD±R/RW and CD-R/RW, SVCD, USB that contains audio titles, DivX, MP3, WMA, and/or JPEG files.
Identification of Controls • MENU: Accesses menu on a DVD disc. • COLOR/BRIGHT: Selects the mode of LCD adjustment Brightness → Color → OFF • FLIP: Rotates the screen. Main Unit a e Menu Control Buttons • b B v V (left/right/up/down) Selects an item in the menu. • b B: Adjusts the COLOR/BRIGHT. • ENTER: Confirms menu selection. b f Disc Lid g OPEN button: Push this button to open the Disc lid. c Touch Pad Operation The buttons from c to e are touch pad type button that is operated with brief touch.
Identification of Controls (continued) a Volume Control b Earphones jacks c COAXIAL jack d AV IN/OUT jack NOTE a b c d If the VIDEO IN signal is not connected in AV IN mode, this unit will automatically power off in 10 minutes to prevent battery discharge. e e DC IN Connect the AC adapter or Automotive adapter. f Remote sensor Receive the signal from the Remote Control for operation. g Battery charge indicator h (POWER): Switches the player ON or OFF.
Identification of Controls (continued) a Remote Control a b c c POWER: Switches DVD Player ON or OFF. AUDIO: Selects an audio language. SUBTITLE: Selects a subtitle language. ANGLE: Selects a DVD camera angle, if available. Reverse SKIP/SEARCH ( . ): Search backward*/ go to beginning of current chapter or track or go to previous chapter or track. Forward SKIP/SEARCH ( > ): Search forward*/ go to next chapter or track. * Press and hold button for about two seconds.
Identification of Controls (continued) Insert the battery (Lithium battery) NOTES • Replace Remote Control unit battery with 3V micro lithium cells such as CR. 2025 or its equivalent. • Dispose of battery safety in accordance with local laws. Do not dispose of in fire. Warning : The battery used in this device may present a fire or chemical burn hazard if mistreated. Do not recharge, disassemble, incinerate, or heat above 100 °C (212 °F). Replace the battery with Matsushita Elec. Ind. Co., Ltd.
Power Connections Caution Connect the AC adapter. • Do not connect the power plug to a power outlet other than that indicated on the label, as this can result in a risk of fire or electric shock. • Do not connect or disconnect the power plug with wet hands. Doing so may cause electric shock. • Do not use an AC adapter other than one specified, as it can cause a fire or damage to the player. AC adapter • This AC adapter operates on 100-240V~ 50/60Hz 1.5A.
Power Connections (continued) This unit and its automotive adapter are designed for use in vehicles that have 8.5-16 volt, negative ground electrical systems. (This is standard for most vehicles.) If your vehicle has a different type of electrical system, the DC power system cannot be used. Cigarette lighter socket b Examples include: - Inside a car with the windows closed and in direct sunshine. - Near a heating appliance. a a Connect the automotive adapter to the DC IN the unit.
Power Connections (continued) Battery Pack NOTES Charge the battery pack before using it for the first time. • Do not detach the battery pack during playback. • Be careful not to drop the battery pack. A Detaching the battery pack a Press the PUSH knob. Attaching the battery pack a Match the hooks of the battery pack into the holes on the bottom of the player. A b Pull the battery pack until the hooks click. b Press and slide the battery pack until the hooks click.
Power Connections (continued) Player Connect theAC adapter cord A Recharging and play times Recharging without Playback Approx. 3.5 hour Battery Pack Introduction A Charging the battery pack 1. Attach the battery pack to the player. 2. Connect the AC power adapter to the player and the plug into an AC outlet. Play time Approx. 5.0 hours* * When Brightness control is set to initial mode. - using the headphones and volume center. - The playing time may be different depending on the kinds of disc.
Rotating the LCD After rotating LCD completely, you can fold the LCD screen as shown above. You can rotate LCD clockwise an angle of 180 degrees. However, if you turn it by force, it can cause serious damage.
Playing a Disc Select a MODE 2. Open the outer cover and press POWER button. Selects a mode among DISC, AV IN or USB. 3. Press OPEN to open the disc lid and insert a disc with the side you want to play label up. Close the disc lid by hand. 1. Press MODE button on the unit. The mode selection menu appears on the screen. • If the disc is placed in upside down (and it is a single-sided disc), “CHECK DISC” or “DISC ERROR” appears on the screen.
On-Screen Display Displaying Disc Information on-screen Initial Settings You can display various information about the disc loaded on-screen. By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 19 to 23. 1. Press DISPLAY to show various playback information. The items displayed differ depending on the disc type or playing status.
Initial Settings DISPLAY Menu Language TV Aspect Select a language for the Setup menu and on-screen display. 4:3: Select when a standard 4:3 TV is connected. Disc Audio / Subtitle / Menu 16:9: Select when a 16:9 TV is connected. Select the language you prefer for the audio track (disc audio), subtitles and the disc menu. NOTE If the TV Aspect option is set to 16:9, the Display Mode setting is automatically set to Widescreen. Original: Refers to the original language in which the disc was recorded.
Initial Settings (continued) AUDIO Sample Freq. (Frequency) Each DVD disc has a variety of audio output options. Set the player’s AUDIO options according to the type of audio system you use. If your receiver or amplifier is NOT capable of handling 96 kHz signals, select 48 kHz. When this choice is made, this unit automatically converts any 96 kHz signals to 48 kHz so your system can decode them. If your receiver or amplifier is capable of handling 96 kHz signals, select 96 kHz.
Initial Settings (continued) LOCK (Parental Control) 3. Select a rating from 1 to 8 using the v / V buttons. Unlock: If you select unlock, parental control is not active and the disc plays in full. NOTE If you set a rating for the unit, all disc scenes with the same rating or lower are played. Higher rated scenes are not played unless an alternate scene is available on the disc. The alternative must have the same rating or a lower one. If no suitable alternative is found, playback stops.
Initial Settings (continued) Password Area Code You can enter or change password. Enter the code of the area whose standards were used to rate the DVD video disc, based on the list on page 41. 1. Select Password on the LOCK menu then press B. 2. To make a new password: Press ENTER when the “New” option is highlighted. Enter a new password using the numbered buttons then press ENTER. Enter the password again to verify. 1. Select “Area Code” on the LOCK menu then press B. 2.
Initial Settings (continued) DivX(R) VOD We provide you the DivX® VOD (Video On Demand) registration code that allows you to rent and purchase videos using the DivX® VOD service. For more information, visit www.divx.com/vod. The PBC, DivX(R) VOD settings can be changed. 1. Select “DivX(R) VOD” option then press B. 2. Press ENTER while “Select” is selected and the registration code will appear. Use the registration code to purchase or rent the videos from DivX® VOD service at www.divx.com/vod.
General Features If a menu screen is displayed Moving to another TITLE When a disc has more than one title, you can move to another title. Press DISPLAY during playback or resume play then the appropriate number (0-9) or use b / B to move to another title. DVD Use the b B v V buttons to select the title/chapter you want to view, then press ENTER to start. Press TITLE or MENU to return to the menu screen. Moving to another CHAPTER/TRACK VCD ALL During playback, press SKIP/SEARCH (.
General Features (continued) Still Picture and Frame-by-Frame Playback ALL During playback, press REPEAT repeatedly to select a desired repeat mode. ALL During playback, press PAUSE/STEP(X) to pause playback. DVD Video Discs: Chapter/Title/Off DVD VCD DivX Video CDs, Audio CD, DivX/MP3/WMA discs: Track/All/Off Press PAUSE/STEP(X) repeatedly to play Frame-by-Frame. ( Remote Control Only ) To exit still motion mode, press PLAY(N).
General Features (continued) Title Menu Subtitles DVD DVD DivX If the current DVD title has a menu, the title menu appears on the screen. Otherwise, the disc menu may appears. Press SUBTITLE repeatedly during playback to see the different subtitle languages. Disc Menu NOTE DVD If there is no information or there is a code that can not read in the DivX file, “ 1 ” etc are displayed. Press MENU and the disc menu is displayed. Press MENU again to exit.
Additional features DVD VCD Last Scene Memory DivX To enter a Marker DVD ACD VCD1.1 This unit memorizes last scene from the last disc that is viewed. The last scene remains in memory even if you remove the disc from the unit or switch off the unit. If you load a disc that has the scene memorized, the scene is automatically recalled. You can start playback from up to nine memorized points. To enter a marker, press MARKER at the desired point on the disc.
Playing an Audio CD or MP3/WMA file MP3 / WMA file compatibility with this unit is limited as follows: • Sampling frequency: within 8 - 48 kHz (MP3), within 32 - 48kHz (WMA) This unit can play Audio CDs or MP3/WMA files. MP3/ WMA/ Audio CD Once you insert an MP3/WMA files recorded media or Audio CD, a menu appears on the TV screen. Press v / V to select a track/file then press PLAY(N) or ENTER and playback starts. You can use variable playback functions. Refer to page 24-25.
Programmed Playback Repeat Programmed Tracks Press REPEAT to select a desired repeat mode. • Track: repeats the current track • All: repeats all the tracks on programmed list. • Off(No display): does not play repeatedly. 1. Insert an Audio CD or MP3/WMA files recorded media. AUDIO CD or MUSIC menu appears. 2. Press PROG. The E mark will appear NOTE NOTE Press PROG. again, then the Program Edit mode. E If you press > once during Repeat Track playback, the repeat playback cancels.
Viewing a JPEG file This unit can play JPEG files. TIPS 1. Insert a JPEG files recorded media. The PHOTO menu appears on the TV screen. • Press MENU to move to the next page. • There are three Slide Speed options : >>> (Fast), >> (Normal) and > (Slow). Use v V b B to highlight the . Then, use b / B to select the option you want to use. • On a CD with MP3/WMA, JPEG and MOVIE file, you can switch MUSIC, PHOTO and MOVIE menu. Press TITLE and MUSIC, PHOTO and MOVIE word on top of the menu is highlighted.
Viewing a JPEG file (continued) Moving to another file Press SKIP/SEARCH (. or >) or cursor (b or B) once while viewing a picture to advance to the next or previous file. • Depending upon the size and number of JPEG files, it could take a long time for the unit to read the disc’s contents. If you don’t see an on-screen display after several minutes, some of the files may be too large — reduce the resolution of the JPEG files to less than 2M pixels as 2760 x 2048 pixels and burn another disc.
Playing a DVD VR format Disc This unit will play DVD-RW discs recorded using the Video Recording (VR) format. 1. Insert a disc and close the tray. The DVD-VR menu appears on the screen. 2. Press v / V to select a track then press PLAY(N) or ENTER and playback starts. 3. Press MENU to move to the list menu. NOTES • This unit will play DVD-R/RW disc that is recorded using the DVD-Video format that have been finalized using a DVD-recorder. Unfinalized DVDR/RW discs cannot be played in this unit.
Playing a DivX Movie file 1. Insert a DivX file recorded media. The MOVIE menu appears on the screen. TIPS • Press MENU to move to the next page. • On a CD with MP3/WMA, JPEG and MOVIE file, you can switch MUSIC, PHOTO and MOVIE menu. Press TITLE and MUSIC, PHOTO and MOVIE word on top of the menu is highlighted. • The disc subtitle may not be displayed properly, if a DivX subtitle is downloaded through the internet. 2. Press v / V to select a folder, and press ENTER.
Playing a DivX Movie file (continued) DivX disc compatibility with this unit is limited as follows: Playable DivX file • Available resolution size of the DivX file is under 720x576 (W x H) pixel. ".avi ", ".mpg ", ".mpeg " Playable Subtitle format • The file name of the DivX subtitle is limited to 56 characters. SubRip(*.srt/*.txt) SAMI(*.smi) SubStation Alpha(*.ssa/*.txt) MicroDVD(*.sub/*.txt) SubViewer 2.0(*.sub/*.txt) TMPlayer(*.txt) Dvd Subtitle System(*.txt) VobSub (*.
Playing an USB Flash Drive • Do not extract the USB Flash Drive in operating. • Music files (MP3/WMA), image files (JPEG) and DivX files can be played. • The total number of files in a USB Flash Drive should be less than 650 files. • Some USB Flash Drive is not supported on this unit. • This unit supports only USB Flash Drive. • This unit can support USB1.1. 1. Connect the USB Flash Drive to the USB port on the unit after power is on. 2. Press MODE on the unit.
Setting up the Player The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. If this occurs, position the player away from the TV, VCR, or radio, or turn off the unit after removing the disc. Rear of TV AV output Connections Depending on your TV and other equipment there are various ways you can connect the unit. Please refer to the manuals of your TV, stereo system or other devices as necessary for additional connection information.
Setting up the Player (continued) AV input Connections to Your unit Connect the input jacks (Audio/Video) on the unit to the audio/video out jacks on your external device, using audio/video cables. 1. Set the Mode selection menu to “AV IN” mode. 2. Connect the black end of supplied AV cable to the AV IN/OUT jack on the unit. 3. Connect the yellow end of supplied AV cable to the VIDEO Output jack on your external device. External Device 4.
Setting up the Player (continued) Amplifier equipped with 2-channel analog stereo or Dolby Pro Logic ll / Pro Logic: Connect the AV IN/OUT jacks on the unit to the audio left and right IN jacks on your amplifier, receiver, or stereo system, using the audio cables. Audio Connection to Optional Equipment Connect the unit to your optional equipment for audio output. You must set the Mode selection menu to “USB” or “ DISC” mode.
Troubleshooting No picture on the LCD or TV (including video from another unit). • • • • The The The The Cause power cord is disconnected. battery is discharged. video cable is not connected securely. MODE selection is not set correctly. • LCD mode is set to OFF. • The TV is not set to receive DVD signal output. No sound. The unit does not start playback. No response when buttons are pressed. The Remote Control does not work properly.
Language Codes Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Area Codes Choose an area code from this list.
Specifications General Liquid Crystal Display Power supply: DC 9.5V (AC adapter terminal), DC 7.4V (Battery) Panel size: 8 inches wide (diagonal) Projection system: R.G.B. stripe Power consumption: 12W with battery Driving system: TFT active matrix Net Weight: 1.87 lbs (0.85 kg) (without battery pack) Resolution: 800 x 480 x 3 (effective pixel rate: more than 99.99%) External dimensions (W x H x D): 8.5 x 1.3 x 7.1 inches (216 x 33.2 x 181.
DP281B-P.AA3GLLW_DEU Tragbarer DVD – Player Bedienungsanleitung Modell: DP281B Bitte lesen Sie diese Bedienungsanleitung vor Anschluss, Inbetriebnahme oder Einstellung dieses Gerätes vollständig durch.
Sicherheitsvorkehrungen ACHTUNG STROMSCHLAGGEFAHR NICHT ÖFFNEN VORSICHT: Dieses Gerät besitzt ein Laser-System. Um das Gerät richtig zu verwenden, lesen Sie dieses Benutzerhandbuch sorgfältig durch und bewahren Sie es auf. Setzen Sie sich zur Wartung mit einem qualifizierten Servicebetrieb in Verbindung. Durch Bedienung, Einstellungen oder Verfahren, die in diesem Handbuch nicht erwähnt werden, können gefährliche Strahlungen verursacht werden.
Sicherheitsvorkehrungen (Fortsetzung) Die meisten Geräte sollten an einen eigenen Stromkreis angeschlossen werden; D. h. eine separate Steckdose ohne weitere Anschlüsse oder Zweigleitungen, über die ausschließlich dieses Gerät mit Strom versorgt wird. Beachten Sie hierzu die technischen Daten des Gerätes in diesem Benutzerhandbuch. Entsorgung von Altgeräten 1.
Inhaltsverzeichnis Wiedergabe einer Audio-CD oder MP3-/WMA-Dateien . . . . . . . . . . . . 28 Programmierte Wiedergabe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Programmierte Tracks wiederholen . . . . . . . . . . . . . . . . . . . . . . . . 29 Track aus der Programmliste löschen . . . . . . . . . . . . . . . . . . . . . . 29 Gesamte Programmliste löschen . . . . . . . . . . . . . . . . . . . . . . . . . 29 Anzeigen einer JPEG-Dateien . . . . . . . . . . . . . . . . . . . . . . . .
Vorbereitungen Hinweise zu Discs Handhabung von Discs Berühren Sie die bespielte Seite der Disc nicht. Fassen Sie die Disc an den Rändern an, um nicht die Oberfläche mit den Fingern zu berühren. Bringen Sie auf keiner der beiden Seiten der Disc Etiketten oder Aufkleber an. Dieses Handbuch enthält Informationen über den Betrieb und die Wartung Ihres DVD-Players. Wenn dieses Gerät repariert werden muss, wenden Sie sich an einen autorisierten Fachhändler.
Vorbereitungen (Fortsetzung) Wartung und Service Wartung des Gerätes Lesen Sie die Informationen in diesem Kapitel, bevor Sie sich an einen Servicetechniker wenden. Der DVD-Player ist ein Hightech-Präzisionsgerät. Wenn die optische Abtast-Linse und die Teile des Disc-Laufwerks verschmutzt oder abgenutzt sind, kann sich die Bildqualität verschlechtern. Handhabung des Gerätes Je nach Betriebsumgebung empfehlen wir regelmäßige Prüfungen und Wartungen nach jeweils 1000 Stunden Betrieb.
Vorbereitungen (Fortsetzung) Audio-CD (8 cm / 12 cm-Disc) Ländercode DVD (8 cm / 12 cm-Disc) Der Ländercode dieses Players ist auf der Geräterückseite aufgedruckt. Es können nur DVD-Discs mit diesem bzw. mit dem Ländercode “ALL (Alle)” wiedergegeben werden. Zusätzlich können auf diesem Gerät DVD±R/RW-, CD-R/RW-, USB und Dual-Discs mit Audiotiteln, DivX-, MP3-, WMA- und/oder JPEG-Dateien wiedergegeben werden.
Bedienungselemente • MENU-Taste: DVD-Menü ein- bzw. ausblenden. • COLOR/BRIGHT : Einstellungsoption für LCD-Anzeige Helligkeit → Farbe → AUS • FLIP: Bildschirmanzeige drehen. Hauptgerät a e Menü-Steuertasten • b B v V (links/rechts/oben/unten) Wählt einen Menüpunkt aus • b B : Einstellen der FARBE/HELLIGKEIT. • ENTER-Taste: Bestätigt die Menüauswahl. b f Disc-Fach-Deckel g Taste OPEN: Drücken Sie zum Öffnen der CD-Klappe diese Taste.
Bedienungselemente (Fortsetzung) c COAXIAL-Buchse d AV-Eingangs-/Ausgangsbuchse HINWEIS a b c d Falls im AV-Eingangsmodus kein VIDEO-Eingangssignal anliegt, schaltet sich das Gerät nach zehn Minuten automatisch ab, um einem Entladen der Batterie vorzubeugen. e e DC-Eingang Anschluss des Netzadapters oder Auto-Adapters. f Fernbedienungssensor Empfang des Signals der Fernbedienung. g Akku-Ladeanzeige h (POWER-Taste): Schaltet den DVD-Player EIN (ON) oder AUS (OFF).
Bedienungselemente (Fortsetzung) a Fernbedienung a b c d c POWER-Taste: Schaltet den DVD-Player ENG (ON) und AUS (OFF). AUDIO-Taste: Wählt eine Audio-Sprache (DVD). SUBTITLE-Taste: Wählt eine Untertitelsprache aus. ANGLE-Taste: Wählt einen DVDKamerawinkel aus, sofern vorhanden. SKIP/SEARCH vor ( . ): Ermöglicht das Rückwärtsspulen*/ das Ansteuern des aktuellen Kaptitels oder Titels oder des vorhergehen Kapitels oder Titels.
Bedienungselemente (Fortsetzung) Einlegen der Batterie (Lithium-Knopfzelle) HINWEISE • Zum Austausch der Batterie der Fernbedienung verwenden Sie immer 3V Lithium-Knopfzellen, beispielsweise CR. 2025 oder gleichwertig. • Entsorgen Sie verbrauchte Batterien gemäß den örtlichen Vorschriften. HINWEISE • Setzen Sie den Signalempfangssensor keinem hellen Licht aus. • Hindernisse im Übertragungsweg zwischen dem Signalempfangssensor und der Fernbedienung sind zu vermeiden.
Stromversorgung Vorsicht • Schließen Sie den Netzstecker in keine andere Netzsteckdose an, als die am Etikett angegebene, ansonsten die Gefahr von Bränden oder Stromschlägen besteht. • Den Netzstecker niemals mit feuchten oder nassen Händen anschließen oder abziehen. Es besteht Stromschlaggefahr. • Verwenden Sie den Netzadapter nur ordnungsgemäß, ansonstenbesteht Gefahr vor Brand oder Verletzung. Anschluss für den Netzadapter Netzadapter • Dieser Netzadapter arbeitet mit 100-240V 50-60Hz 1,5A.
Stromversorgung (Fortsetzung) Achtung • Um Stromschläge und eine mögliche Beschädigung Ihres DVD-Players oder Fahrzeugs auszuschließen, trennen Sie den Kfz-Adapter stets vom Zigarettenanzünder, bevor Sie den Stecker vom DVD-Player abziehen. Dieser DVD-Player und sein Kfz-Adapter wurden für Fahrzeuge konzipiert, die mit 8,5-16 Volt-Elektrik mit negativer Masse ausgerüstet sind. (Standard bei den meisten Fahrzeugen.
Stromversorgung (Fortsetzung) Akkupack ANMERKUNGEN Laden Sie das Akkupack vor der erstmaligen Inbetriebnahme vollständig auf. • Das Batteriepaket darf während der Wiedergabe nicht heraus genommen werden. • Das Batteriepaket darf nicht fallen gelassen werden. Herausnehmen des Batteriepakets a Drücken Sie auf den Schalter. A Anbringen des Batteriepakets a Passen Sie die Laschen des Akkupakets mit den Löchern an der Rückseite des DVD-Players an.
Stromversorgung (Fortsetzung) DVD-Player A Aufladen ohne Wiedergabe ca. 3,5. Stunden Akkupack Anschluss des Netzadapterkabels. Lade- und Betriebszeiten Wiedergabedauer ca. 5 Stunden* * Bei werkseitiger Einstellung der Helligkeit. - Kopfhörer und Lautstärkecenter verwenden. - Je nach Art der eingelegten Disc kann die Spielzeit variieren. Buchse zum Anschluß des Kabels des Netzadapters A 3. Während des Ladevorgangs leuchtet die Ladeanzeige rot.
LCD-Anzeige drehen Der LCD-Bildschirm kann im Uhrzeigersinn in einem Winkel von 180 Grad gedreht werden. Den Schirm niemals gewaltsam drehen. Ansonsten könnte er schwer beschädigt werden. Drehen Sie den Bildschirm bis zum Anschlag, um ihn zum Schließen herunterzuklappen (siehe Abbildung).
DVD-Wiedergabe 1. Bereiten Sie die Stromversorgung vor. Auswahl des Betriebsmodus DISC, AV IN oder USB. 3. Drücken Sie auf die Taste OPEN, um das Disc-fach zu öffnen und legen Sie eine Disc mit der beschrifteten Seite nach oben ein. Schließen Sie das Disc-fach mit der Hand. 1. Drücken Sie die Taste MODE am Gerät. Daraufhin erscheint das Menü zur Moduswahl auf dem Bildschirm. • Bei verkehrt eingelegter Single-Sided-Disc wird “DISC PRÜFEN” oder “DISC FEHLER” auf dem Bildschirm angezeigt.
Bildschirmmenü Anzeige von Disc-Informationen auf dem Bildschirm Grundeinstellungen Mit Hilfe des Setup-Menüs können Sie beispielsweise das Bild und den Ton einstellen. Außerdem können Sie eine Sprache für die Untertitel und das Setup-Menü einstellen. Einzelheiten über die einzelnen Optionen des Setup-Menüs finden Sie auf den Seiten 19 bis 23. Auf dem Bildschirm können verschiedene Informationen über die eingelegte Disc angezeigt werden. 1.
Grundeinstellungen ANZEIGE Menü sprache Bildformat Wählen Sie eine Sprache für das Setup-Menü und das Bildschirmmenü aus. 4:3: Wählen Sie diese Einstellung, wenn ein herkömmliches Fernsehgerät angeschlossen ist. Disc Audio/Untertitel/Menü 16:9 : Wählen Sie diese Einstellung, wenn ein Breitbild-Fernsehgerät angeschlossen ist. Wählen Sie die gewünschte Sprache für den Audio-Titel (Disc Audio), Untertitel und das Disc-Menü aus.
Grundeinstellungen (Fortsetzung) AUDIO Samplingfrequenz (Erkannt) Jede DVD-Disc hat mehrere Audio-Ausgabeoptionen. Legen Sie die Audio-Optionen des Players in Übereinstimmung mit dem Typ des Audiosystems fest, das Sie einsetzen. Wenn Ihr Receiver oder Verstärker NICHT für 96-kHz-Signale ausgelegt ist, wählen Sie 48 kHz. Wenn Sie diese Auswahl getroffen haben, konvertiert das Gerät automatisch 96-kHzSignale in 48 kHz-Signale, die das System dekodieren kann.
Grundeinstellungen (Fortsetzung) 3. Wählen Sie mit den Schaltflächen v / V eine Einstufung zwischen 1 und 8 aus. Einstufung 1-8: Stufe 1 bedeutet niedrigste Wiedergabeeinschränkungen. Stufe 8 bedeutet höchste Wiedergabeeinschränkungen. Geöffnet: Wenn Sie diese Option wählen, ist die Elternsicherung deaktiviert und die Disc wird vollständig wiedergegeben.
Grundeinstellungen (Fortsetzung) Kennwort Orts Code Ein Kennwort kann wie folgt eingegeben oder geändert werden. Geben Sie den Code für das jeweilige Land ein, indem die Freigabe der DVD-Video-Disc erstellt wurde(siehe Liste der Orts Code auf Seite 41). 1. Wählen Sie den Eintrag Kennwort im Menü BLOCK und drücken Sie B. 2. Ein neues Kennwort erstellen: Markieren Sie die Option “Neu” und drücken Sie ENTER.
Grundeinstellungen (Fortsetzung) DivX(R) VOD Die Einstellungen für PBC und DivX(R) VOD können geändert werden. Sie erhalten von uns einen DivX® VOD-Registrierungscode (Video On Demand), mit dem Sie Videofilme über den DivX® VOD-Dienst ausleihen oder kaufen können. Weitere Infos erhalten Sie unter www.divx.com/vod. 1. Wählen Sie die Option “DivX(R)VOD” und drücken Sie B. 2. Drücken Sie bei markierter Option “Auswahl” auf ENTER, um den Registrierungscode anzuzeigen.
Allgemeine Funktionen Wenn der Menübildschirm angezeigt wird Einen anderen TITEL ansteuern DVD Bei mehreren Titeln auf einer Disc können Sie einen anderen Titel auswählen. Drücken Sie während der Wiedergabe oder der fortgesetzten Wiedergabe auf DISPLAY gefolgt von der entsprechenden Nummerntaste (0-9) oder wählen Sie einen Titel mit den Tasten b / B aus. DVD Wählen Sie mit den Tasten b B v V den Titel/das Kapitel aus, das Sie anzeigen möchten. Drücken Sie danach ENTER, um die Wiedergabe zu starten.
Allgemeine Funktionen (Fortsetzung) Standbild und Bild-für-Bild-Wiedergabe ALL Drücken Sie während der Wiedergabe mehrmals auf REPEAT, um den gewünschten Wiederholungsmodus auszuwählen. DVD-Video-Discs: Kapitel/Titel/Aus Video-CDs, Audio-CDs, DivX-/MP3-/WMA-Discs: Track/Alle/Aus Drücken Sie zum Unterbrechen der Wiedergabe auf PAUSE/STEP(X). DVD VCD ALL DivX Drücken Sie zur Einzelbildwiedergabe mehrmals auf PAUSE/STEP(X).
Allgemeine Funktionen (Fortsetzung) Titelmenü Untertitel DVD DVD DivX Falls die eingelegte DVD ein Menü enthält, wird das Titelmenü auf dem Bildschirm angezeigt. Ansonsten erscheint das Disc-Menü. Drücken Sie während der Wiedergabe mehrmals auf SUBTITLE, um die anderen Untertitelsprachen anzuzeigen. Disc-Menü HINWEIS DVD Wenn keine Informationen oder ein unlesbarer Code in der DivXDatei enthalten ist, sind “1” usw. angezeigt. Drücken Sie MENU, um das Disc-Menü anzuzeigen.
Weitere Funktionen DVD VCD Letzte Szene speichern DivX So geben Sie eine Markierung ein Sie können die Wiedergabe an einer von neun gespeicherten Stellen starten. Geben Sie eine Markierung ein, indem Sie an der gewünschten Stelle auf der Disc auf MARKER drücken. Auf dem Fernsehbildschirm wird kurz das Markierungssymbol angezeigt. Wiederholen Sie diese Schritte, um bis zu neun Markierungen einzugeben. DVD ACD VCD1.1 Der Player speichert die letzte Szene der letzten Disc, die wiedergegeben wird.
Wiedergabe einer Audio-CD oder MP3-/WMA-Dateien Mit diesem Player können Audio-CDs oder MP3-/WMA-Dateien wiedergegeben werden. Die Kompatibilität von MP3-/WMA-Dateien und diesem Player unterliegt den folgenden Einschränkungen: • Abtastfrequenz: zwischen 8 und 48 kHz (MP3), zwischen 32 und 48 kHz (WMA) MP3/WMA/Audio-CD Bei eingelegter MP3-/WMA-Disc oder Audio-CD wird ein Menü eingeblendet. Wählen Sie mit v / V einen Track/eine Datei und drücken Sie zur Wiedergabe auf PLAY bzw. ENTER.
Programmierte Wiedergabe Programmierte Tracks wiederholen Drücken Sie auf REPEAT, um den gewünschten Wiederholungsmodus zu wählen. 1. Legen Sie die Audio CD- bzw. MP3-/WMA-Disc ein. Daraufhin erscheint das AUDIO CD- bzw. das Musikmenü. 2. Drücken Sie auf PROG. Daraufhin erscheint das Symbol E • Track: Wiederholt den aktuellen Track. • Alle: Wiederholt alle Tracks der Programmliste. • Aus (keine Anzeige): Keine Wiederholung. .
Anzeigen einer JPEG-Dateien TIPPS • Drücken Sie MENU für die nächste Seite. Mit diesem Gerät können JPEG-Dateien angezeigt werden. 1. Legen Sie die Disc mit den enthaltenen JPEG-Dateien ein. Das Fotomenü wird auf dem Fernsehbildschirm angezeigt. • Vier Geschwindigkeitsoptionen stehen zur Verfügung (Niedrig), >> (Normal) und > (Hoch). Markieren Sie mit v V b B das Symbol Tasten b / B die gewünschte Option aus. : >>> .
Anzeigen einer JPEG-Disc (Fortsetzung) Zu einer anderen Datei wechseln Drücken Sie einmal SKIP/SEARCH (. oder >) oder den Cursor (b oder B) während der Bildanzeige, um die nächste/vorherige Datei aufzurufen. • Abhängig von der Größe und Anzahl der JPEG-Dateien dauert das Lesen des Disc-Inhaltes mit dem DVD-Player entsprechend länger. Wenn nach mehreren Minuten keine Bildschirmanzeige erscheint, sind einige der Dateien u. U.
Wiedergabe von DVD VR-Discs Dieses Gerät kann DVD-RW-Discs im Videoaufzeichnungsformat (VR) abspielen. 1. Legen Sie eine Disc ein und schließen Sie das Fach. Das DVD-VR-Menü wird auf dem Bildschirm angezeigt. 2. Wählen Sie mit v / V einen Track aus und drücken Sie PLAY(N) oder ENTER. Die Wiedergabe beginnt. 3. Drücken Sie die Taste MENU, um die Menüliste aufzurufen. HINWEIS • Dieses Gerät kann DVD-R/RW-Discs abspielen, die in einem DVDVideoformat erstellt und mit einem DVD-Rekorder finalisiert wurden.
Wiedergabe von DivX-Spielfilm-Dateien Hinweise zur Anzeige von DivX-Untertiteln 1. Legen Sie eine Disc mit der DivX-Datei ein. Das Spielfilmmenü wird eingeblendet. Falls die Untertitel während der Wiedergabe nicht korrekt angezeigt werden, halten Sie die Taste SUBTITLE drei Sekunden lang gedrückt und wählen Sie dann mit b / B einen anderen Sprachcode aus, bis die Untertitel richtig angezeigt werden. TIPPS • Drücken Sie MENU für die nächste Seite.
Wiedergabe von DivX-Spielfilm-Discs (Fortsetzung) Die Kompatibilität dieses DVD-Players mit DivX-Discs unterliegt folgenden Einschränkungen: Abspielbare DivX-Dateien • Die Auflösung einer DivX-Datei muss unterhalb von 720 x 576 (BxH) Bildpunkten liegen. Abspielbare Untertitelformate ".avi ", ".mpg ", ".mpeg " SubRip (*.srt/*.txt) SAMI (*.smi) SubStation Alpha (*.ssa/*.txt) MicroDVD (*.sub/*.txt) SubViewer 2.0 (*.sub/*.txt) TMPlayer (*.txt) Dvd Subtitle System (*.txt) VobSub (*.
Wiedergabe von einem USB-Flash-Laufwerk • Das USB-Flash-Laufwerk niemals während der Dateiübertragung trennen. • Es können Musikdateien (MP3/WMA), Bilddateien (JPEG) und Divx-Dateien wiedergegeben werden. • Die Gesamtanzahl der Dateien auf dem USB-Flash-Laufwerk sollte 650 nicht überschreiten. • Bestimmte USB-Flash-Laufwerke werden von diesem Gerät u. U. nicht unterstützt. • Dieses Gerät unterstützt ausschließlich USB-Flash-Laufwerke. • Dieses Gerät unterstützt nur USB 1.1. 1.
Einrichten des Players Bild und Ton eines Fernsehgerätes, eines Videorekorders oder eines Radios in der Nähe können verzerrt wiedergegeben werden. Ist dies der Fall, stellen Sie den Player nicht in der Nähe eines Fernsehgerätes, Videorekorders oder Radios auf und schalten Sie das Gerät nach der Entnahme der Disc aus. Rückseite des Fernsehgerätes AV-Ausgangsanschlüsse Die Anschlussmöglichkeiten des Players richten sich nach Ihrem Fernsehgerät und anderen Geräten.
Einrichten des Players (Fortsetzung) AV-Eingangsanschlüsse zum Gerät Verbinden Sie die Eingangsbuchsen (Audio-/Video) des Gerät über ein Audio-/Videokabel mit den Audio-/Videoausgangsbuchsen des Externegeräte. 1. Stellen Sie im Modus-Auswahlmenü den Modus “AV IN” ein. 2. Schließen Sie das schwarze Kabel des mitgelieferten AVKabels an die AV IN/OUT-Buchsen des Gerätes an. 3. Schließen Sie das gelbe Kabel des mitgelieferten AV-Kabels an die VIDEO-Ausgangsanschlüsse des Zusatzgerätes an. Externegeräte 4.
Einrichten des Players (Fortsetzung) Mit analogem Zweikanal-Stereo oder Dolby Pro Logic II / Pro Logic ausgerüsteten Verstärker: Verbinden Sie die AV IN/OUTBuchsen des DVD-Players über das Audiokabel mit der linken und rechten Eingangsbuchse des Verstärkers, Receivers bzw. der Stereoanlage. Audioanschluss zu optionalen Geräten Schließen Sie den DVD-Player zur Audioausgabe an Ihre optionalen Geräte an. Im Menü zur Moduswahl muss die Option “USB” oder “DISC” ausgewählt werden.
Störungsbehebung Der DVD-Player beginnt • Eine unabspielbare Disc ist eingelegt. nicht mit der Wiedergabe. • Es wurde eine Freigabestufe (Rating) festgelegt. • Bei manchen Discs stehen bestimmte Keine Reaktion beim Funktionen nicht zur Verfügung. Drücken der Tasten. Behebung • Stecken Sie den Netzkabelstecker fest in die Steckdose ein. • Laden Sie die Batterie auf. • Schließen Sie das Videokabel fest an den Buchsen an. • Korrigieren Sie die Auswahl des MODUS.
Sprachcodes Geben Sie die Codenummer der gewünschten Sprache für die folgenden Grundeinstellungen ein: Disc-Audio, Disc-Untertitel, Disc-Menü.
Orts Code Orts Code Afghanistan AF Argentinien AR Australien AU Österreich AT Belgien BE Bhutan BT Bolivien BO Brasilien BR Kambodscha KH Kanada CA Chile CL China CN Kolumbien CO Kongo CG Costa Rica CR Kroatien HR Tschechische Republik CZ Dänemark DK Ecuador EC Ägypten EG El Salvador SV Orts Code Äthiopien ET Fidschi FJ Finnland FI Frankreich FR Deutschland DE Großbritannien GB Griechenland GR Grönland GL Heard-und-McDonaldInseln HM Ungarn HU Indien IN Indonesien ID Israel IL Italien IT Jamaika JM Japan J
Technische Daten Allgemein Flüssigkristallanzeige Stromversorgung: 9,5 V Gleichstrom (Wechselstromadapteranschluss), 7,4 V Gleichstrom (Batterie) Bildschirmgröße: 8 Zoll (Diagonal) Leistungsaufnahme: 12 W mit Batterie Antriebsystem: Aktive TFT-Matrix Gewicht: 0,85 kg (ohne Batteriepaket) Auflösung: 800 x 480 x 3 (Effektive Pixelanzahl: über 99,99%) Äußere Abmessungen (B x H x T): 216 x 33.2 x 181.