DR1F9M-AA1ULL-ENG DVD RECORDER OWNER’S MANUAL MODEL: DR1F9H Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely. Call us and we will guide you through your first recording, for free.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus. CAUTION concerning the Power Cord CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Introduction IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL. AND THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This product has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the following procedures for installation, use, and servicing.
Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-10 Symbol Used in this Manual . . . . . . . . . . . . . . . .5 Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . .5 Recordable and Playable Discs . . . . . . . . . . . . .6 Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . .7 Regional Code . . . . . . . . . . . . . . . . . . . . . . . . . .7 Card useable on this unit . . . . . . . . . . . . . . . . . . . .8 Front Panel . . . . . . . . . . . . . . . .
Notes on Discs To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference. Handling Discs Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints do not get on the surface. Never stick paper or tape on the disc. Introduction Introduction This manual provides information on the operation and maintenance of your recorder. Should the unit require service, contact an authorized service location.
Recordable and Playable Discs DVD-RW (Digital Video Disc - ReWritable): DVD-RW discs can be formatted for VR mode recording or Video mode recording. These Discs can be recorded on repeatedly. Recordings can be erased, then you can record again on the same Disc.
Introduction Playable Discs DVD (8 cm / 12 cm disc) Discs such as movies that can be purchased or rented Audio CD (8 cm / 12 cm disc) Music CDs or CD-Rs/CD-RWs in music CD format that can be purchased Video CD (VCD) (8 cm / 12 cm disc) VIDEO CDs or CD-Rs/CD-RWs in VIDEO CD/Super VIDEO CD format CD-R/CD-RW (8 cm / 12 cm disc) CD-R/CD-RW discs that contain audio titles, DivX, MP3, WMA, or JPEG files.
Card useable on this unit Compact Flash Card (CF) Micro Drive (MD), ST1 MD Secure Digital Card (SD), Mini SD Multi Media Card (MMC), MMC Plus, RS MMC, MMC Mobile xD-Picture Card (xD) Memory Stick (MS), MS Duo, MS Pro, MS Pro Duo Compatible with: FAT 12, FAT 16, or FAT 32 Only use the memory cards recommended above. Using Memory Card 1. Insert a memory card. 2. Press HOME on the remote control. 3. Select [Music] or [Photo] option. 4. Select [MEMORY CARD] then press ENTER.
a b l m c d e f gh n o i jk p a POWER button Switches the recorder ON or OFF. j PIP Selects PIP function on or off. b Disc Tray Insert a disc here. k Remote Sensor Point the recorder remote control here. c Display window Shows the current status of the recorder. l MEMORY CARD Slot 1 Insert a memory card (CF/MD/ST1 MD). TV: Indicates when the recorder is in TV tuner mode. REC: The recorder is recording. : Indicates when the recorder is in timer recording or a timer recording is programmed.
Remote Control a b c d a POWER: Switches the recorder ON or OFF. OPEN/CLOSE (Z): Opens and closes the disc tray. TV/DVD: To view channels selected by the recorder tuner or by the TV tuner. INPUT: Changes the input to use for recording (Tuner, AV1-2, or DV IN). 0-9 numerical buttons: Selects numbered options in a menu. I.SKIP (INSTANT SKIP): Skips 30 seconds forward during playback. TV Control Buttons: See page 48. b SCAN (m / M): Search backward or forward.
Hookup and Settings Rear Panel i b c d j e f g h Hookup and Settings a k a ANT. IN Connect the antenna to this terminal. h AC Power Cord Plug into the power source. b HDMI Connector (Type A) HDMI output providing a high quality interface for digital audio and video. i RF. OUT Connect to a TV with RF coaxial inputs. c VIDEO / AUDIO OUT (Left/Right) Connect to a TV with video/audio inputs.
Connecting an Antenna or Cable TV a Antenna Antenna Cable TV Wall Jack a Antenna: Disconnect the antenna from the rear of the TV and identify the antenna cable. If it is a round 75 ohm coaxial cable connect it directly to the jack marked ANT. IN on your Recorder. If your antenna cable is flat connect it to a 300-ohm to 75-ohm antenna adaptor (not supplied) and slip the adaptor over the ANT. IN jack. Don’t attempt to screw it into to the Recorder.
Make one of the following connections, depending on the capabilities of your existing equipment. Tips Depending on your TV and other equipment you wish to connect, there are various ways you could connect the recorder. Use only one of the connections described below. Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections. Caution – Make sure the recorder is connected directly to the TV. Tune the TV to the correct video input channel.
HDMI connection HDMI compatible TV HDMI If you have a HDMI TV or monitor, you can connect it to this recorder using a HDMI cable. 1. Connect the HDMI jack on the recorder to the HDMI jack on a HDMI compatible TV or monitor (H). H 2. Set the TV’s source to HDMI (refer to TV’s Owner’s manual). Notes: If your TV is NOT capable of handling 96 kHz sampling frequency, set the [Sampling Freq.] option to [48 kHz] on the setup menu (See page 20).
Connecting to an Amplifier Rear of the recorder Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic ll/ Pro Logic Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/ Video receiver equipped with a multi-channel decoder (Dolby Digital™, MPEG 2, or DTS) A X Hookup and Settings Connect the Left and Right AUDIO OUT jacks on the recorder to the audio left and right in jacks on your amplifier, receiver, or stereo system, using the audi
Accessory Audio/Video (A/V) Connections Connecting to the AV IN 1 or AV IN 2 Jacks Connect the input jacks (AV1, AV2) on the recorder to the audio/video out jacks on your accessory component, using audio/video cables. Note: If you use the S-VIDEO IN jack on the front panel, the VIDEO IN jack on the front panel is not available. Jack panel of Accessory Component (VCR, Camcorder, etc.
Auto Set Up Using the Home Menu After the POWER is pressed for the first time to turn on the unit or resetting the unit, the Initial Setup Wizard function sets the language, clock and tuner channels automatically. From the Home Menu screen you can access all the Media for playback and recording of the recorder. 2. Use b / B buttons to select a main option you want. Sub options appears. Hookup and Settings 1. Select a language for the Setup menu and onscreen display.
Initial Settings In this menu system, there are several ways to customize the settings provided. Most menus consist of three levels to set up the options, but some require greater depth for the variety of settings. General Operation 1. Press HOME and select [Setup] option. 2. Select [Start] option then press ENTER. The Setup menu appears. Auto Channel Set Connect the Recorder to the desired type of antenna or cable TV system as shown on page 12.
TV Aspect In the Auto option, the Recorder looks for a channel carrying XDS (Extended Data Services) information. XDS updates the clock using the Coordinated Universal Time. Selects the aspect ratio of the connected TV (4:3 standard or wide). [4:3 Letter Box] Select this when connecting to a 4:3 screen TV. Displays a wide picture with bands on the upper and lower portions of the screen. [4:3 Pan Scan] Select this when connecting to a 4:3 screen TV.
Language Settings Display Menu Select a language for the Setup menu and on-screen display. Disc Menu/Audio/Subtitle [Original]Refers to the original language in which the disc was recorded. [Others] To select another language, press number buttons then ENTER to enter the corresponding 4-digit number according to the language code list in the reference chapter (see page 47). If you make a mistake while entering number, press CLEAR repeatedly to delete numbers one by one then correct it.
Lock (Parental Control) Settings Set Password Hookup and Settings 1. Select [Set Password] option then press B. 2. Follow step 2 as shown “Rating” on left. To change the password, select the [Change], press ENTER and input the new 4-digit code. Input it again to verify. To delete the password, select [Delete] then press ENTER. If you forget your 4-digit code If you forget your password, to clear the current password, follow the procedure below.
Recording Settings Disc Settings Initialize Disc Record Mode If you load a completely blank disc, the recorder will initialize the disc. DVD-R: The recorder initialize the disc to Video mode. The recording mode will always be Video mode. DVD-RW/DVD+RW/DVD+R (DL)/DVD-RAM: The Initialize menu will appears. Select [OK] then press ENTER. DVD-RW disc is initialized to Video mode. Also, you can reformat the DVD-RW/DVD+RW/ DVD-RAM from the Setup menu as below.
Finalize Finalizing ‘fixes’ the recordings in place so that the disc can be played on a regular DVD player or computer equipped with a suitable DVD-ROM drive. Finalizing a Video mode disc creates a menu screen for navigating the disc. This is accessed by pressing MENU/LIST or TITLE. Caution Once you have finalized a DVD-R and DVD+R disc, you cannot edit or record anything else on that disc except DVD+RW. However, you can record and edit a DVD-RW disc by choosing [Unfinalize] option.
General Explanation of On-Screen Display This manual gives basic instructions for operating the recorder. Some DVDs require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, indicating that the operation is not permitted by the recorder or is not available on the disc. Displaying Information While Watching TV During viewing the TV, press DISPLAY to display/remove the information displayed on-screen.
Playback General Playback Features 1. Load your chosen disc in the tray, with the playback side down. 2. Starts playback using HOME menu (see page 17). 3. To stop the playback, press STOP (x). The unit records the stopped point, depending on the disc. “Xx” appears on the screen briefly. Press PLAY (N) to resume playback (from the scene point). If you press STOP (x) again or unload the disc (“x” appears on the screen.), the unit will clear the stopped point. 4. Press OPEN/CLOSE (Z) to remove the disc.
General Playback Features (Continued) Buttons Operations PLAY MODE For repeat playback During playback, press PLAY MODE repeatedly to select a desired repeat mode. DVD (Chapter/Title/Off) VR mode DVD-RW (Chapter/Title/All/Off) Video CD, Audio CD (Track/All/Off) MP3/WMA (Track/Folder/Off) Notes: On a Video CD with PBC, you must set PBC to [OFF] in the Setup menu to use the Repeat function. See page 23. If you press SKIP (>) once during Repeat Chapter (Track) playback, the repeat playback cancels.
VCD The menu screen may be displayed first after loading a DVD or Video CD which contains a menu. DVD Use the b / B / v / V buttons to select the title/chapter you want to view, then press ENTER to start playback. Press TITLE or MENU/LIST to return to the menu screen. VCD Use the number buttons to select the track you want to view. Press RETURN (O) to return to the menu screen. Menu setting and the exact operating procedures for using the menu may differ depending on the disc.
3D Surround -RWVR -R +R DVD -RWVideo VCD RAM +RW DivX This unit can produce a 3D Surround effect, which simulates multi-channel audio playback from two conventional stereo speakers, instead of the five or more speakers normally required to listen to multichannel audio from a home theater system. PIP (Picture in Picture) -RWVR RAM +RW -R +R DVD -RWVideo VCD This function enables you to view the stored stations in sub picture during playback. 1. Press DISPLAY during playback.
Playing a DivX Movie File Movie List menu options The recorder can play DivX files. Before playing DivX files, read “DivX file requirement” on right. 1. Press v / V to select a folder/file on the [Movie List] menu then press ENTER. [Movie List] menu options appear. The menu options displayed differ depending on the selected media. Note: This recorder cannot play back the DivX file(s) in the Memory Card. 1. Press HOME. 2. Select [Movie] option. 3.
Playing an Audio CD or MP3/WMA file Audio CD and Music List menu options The recorder can play audio CDs and MP3/WMA files. Before playing MP3/WMA files, read “MP3/WMA audio file requirement” on right. 1. Press v / V to select a folder/file on the [Music List] menu then press ENTER. The menu options appear. The menu options displayed differ depending on the selected media. 1. Press HOME. The HOME menu appears. 2. Press v / V / b / B to select an option, and press ENTER. 2. Select [Music] option.
Viewing a JPEG File Photo List menu options The recorder can play JPEG files. Before playing JPEG recordings, read “Photo file requirement” on right. 1. Press v / V to select a file on the [Photo List] menu then press ENTER. The menu options appear. The menu options displayed differ depending on the selected media. 2. Select [Photo] option. 3. Select a media that contains JPEG file then press ENTER. The [Photo List] menu appears on the TV screen. 2.
View Slide Shows 1. Select [Slide Show] option on the [Photo List] menu (Refer to “Photo List menu options” on page 31). 2. Press ENTER. The Slide Show menu appears. Copying a JPEG file(s) from a disc to a memory card 1. Select a file you wish to copy on the menu. 2. Press ENTER. The menu options appear on the menu. 3. Select [Copy] option then press ENTER. Copy menu appears. 3. Use b / B / v / V to set the options. [Object] option: [Selected] Views slide show only selected files.
Notes for recording About DVD recording Notes: This recorder cannot make recordings on CD-R or CD-RW discs. Our company takes no responsibility for recording failure due to power outages, defective discs, or damage to the Recorder. Fingerprints and small scratches on a disc can affect playback and/or recording performance. Please take proper care of your discs.
Restrictions on copying Some video material is copy-once protected: If you want to record copy-once protected material to DVD, you must use a VR mode DVD-RW disc compatible with CPRM Ver. 1.1. You can identify copy-once protected material during playback by displaying disc information on-screen. PAL format signals from the analog or the DV inputs is not recorded correctly with this recorder.
Basic Recording from a TV Instant Timer Recording Follow the instructions below to record a TV program. Recording starts immediately and continues until the disc is full or you stop the recording. Instant Timer Recording allows you to make a recording easily of a preset length without using the program timer. Note: You must load a recordable disc for DVD recording. 1. Follow steps 1-2 as shown left (Basic Recording from a TV). 2. Press REC (z) repeatedly to select the recording time length. 1.
Timer Recording This recorder can be programmed to record up to 16 programs within a period of 1 month. For unattended recording, the timer needs to know the channels to be recorded, the starting and ending time. Note: If you use a completely blank disc for timer recording, you must format the disc before starting timer recording. (Refer to “Initialize” on page 22.) 1. Press HOME and select [TV] option. 2. Press v / V to select [Timer Record] option then press ENTER. The [Timer Record List] will appear. 3.
Checking Timer Recording Details Programming can be checked whenever the recorder is turned on. 1. Press HOME and select [TV] option. 2. Press v / V to select [Timer Record] option then press ENTER. The [Timer Record List] will appear. Use v / V to select a timer recording. Press ENTER to edit the selected program. Timer Record menu appears. Press CLEAR to delete the selected program from the Timer Record List. If two or more timer programs overlap: The earlier program takes priority.
Recording from DV Input 1. Make sure your digital camcorder is connected to the front panel DV IN jack. See page 16. Before DV dubbing 2. Check that the DV audio input is as you require. You can choose between Audio 1 (original audio) and Audio 2 (overdubbed audio). You can connect a DV-equipped camcorder to this recorder using a single DV cable for input and output of audio, video, data and control signals. This recorder is only compatible with DV-format (DVC-SD, DV25) camcorders.
Editing 12 3 4 5 6 Title List and Chapter List Menu Overview Using the Title List menu you can edit video content. The editing features available in the Title List menu depend on whether you are editing video on DVD, and whether you’re editing Original content, or a Playlist. There are two ways to edit VR mode DVD-RW discs. You can directly edit the Original content of the disc, or you can create and edit a Playlist.
VR Mode: Original and Playlist Editing Titles, Chapters and Parts Titles in the disc’s original content contain one or more chapters. When you insert a disc’s title into the Playlist, all the chapters within that title also appear. In other words, chapters in the Playlist behave exactly as chapters on a DVD-Video disc do. Parts are sections of Original or Playlist titles. From the Original and Playlist menu you can add or delete parts.
Making a New Playlist -RWVR RAM Use this function to add an Original title or chapter to the Playlist. When you do this, the whole title is put into the Playlist (you can delete bits you don’t need later — see Deleting an Original or Playlist title/chapter on page 42). The title appears in the Playlist complete with the chapter markers that appear in the Original. However, if you add more chapter markers to the Original later, these are not automatically copied over into the Playlist title.
Deleting an Original or Playlist Title/Chapter When you erase a title or chapter from the Playlist menu, you only remove it from the Playlist; the title/chapter remains in the Original menu. If you choose to delete a title or chapter from the Original (title/chapter) menu, the title or chapter is actually deleted from the disc and the remaining time available for recording increases. Titles/chapters deleted from the Original are also removed from the Playlist.
Naming a Title You can name Original and Playlist titles independently. Names can be up to 32 characters long. 1. Choose the title you want to name on the Title List menu, then press ENTER. The menu options appears on the left side of the menu. 2. Use v/V to select [Title Name] option then press ENTER. Keyboard menu appears. Time Search -RWVR -RWVideo RAM +RW -R +R You can select start point of the title. 1. Use b / B / v / V to choose a title on the Title List menu then press ENTER.
Divide One Titles Into Two +RW Combining Two Chapters Into One -RWVR +RW +R RAM Use this command to split a title up into two new titles. Use this function to combine two adjacent Playlist or Original chapters into one. 1. On the Title List menu, select a title you want to divide then press ENTER. The menu options appears on the left side of the screen. Note: This function is not available if there is only one chapter within the title. 1.
-RWVR RAM Use this function to re-arrange the playing order of Playlist chapters on the Title List-Playlist menu. Note: This function is not available if there is only one chapter. 1. Select a chapter on the Chapter List-Playlist menu. 2. Press ENTER. The menu options appears on the left side of the menu. 3. Use v / V to select [Move] option from Playlist options then press ENTER. 4. Use b / B / v / V to choose the place you want to move the chapter to then press ENTER.
Reference Additional Information Overwriting Recording +RW 2. Press TITLE in play or stop mode. Title List menu will appear as shown below. Tip You can remove the Title List menu by pressing STOP (x). To overwrite a new video recording on a previously recorded title, follow these steps. This feature is not available for DVD+Rs, that always record at the end of the Disc. 1. Select input source you want to record (TV channel, AV1-2, DV). 2. Press MENU/LIST to display the Title List menu. 3.
Language Codes Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Code numbers of controllable TVs Reference Controlling Your TV with the Supplied Universal Remote Control If more than one code number is listed, try entering them one at a time until you find the one that works with your TV. You can control the sound level, input source, and power switch of your LG TV with the supplied Universal Remote Control. You can control your TV using the buttons below.
Troubleshooting Check the following guide for the possible cause of a problem before contacting service. Cause Solution The power cord is disconnected. Plug the power cord into the wall outlet securely. No picture. The TV is not set to receive recorder signal output. Select the appropriate video input mode on the TV so the picture from the recorder appears on the TV screen. The video cable is not connected securely. Connect the video cable securely.
Cause Symptom Cannot play a disc recorded using this recorder on another player. Cannot record or did not record successfully. Timer recording is not possible. Stereo Audio Record and/or Playback is not present. The remote control does not work properly. The disc was recorded in Video mode. Finalize the disc. (page 23) Some players will not play even a finalized disc recorded in Video mode. No solution.
Specifications General Power requirements Power consumption Dimensions (approx.) Mass (approx.) Operating temperature Operating humidity Television system Recording format AC 120 V, 60 Hz 22W 430 X 54 X 275 mm (w x h x d) without foot 4.
LG Electronics, Inc. Limited Warranty - USA This LG Electronics product, will be repaired or replaced, at LG’s option, if it proves to be defective in material or workmanship, under normal use, during the warranty period (“Warranty Period”) listed below, effective from the date (“Date of Purchase”) of original consumer purchase of the product. This warranty is good only to the original purchaser of the product and effective only when used in the United States, excluding U.S. Territories.