DV276-E3M.NA3GLLS_ENG DVD PLAYER OWNER’S MANUAL MODEL : DVX276 Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus. CAUTION concerning the Power Cord CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 .4 .4 .4 .4 .4 .4 .5 .5 .6 .7 .7 .7 Installation and Setup . . . . . . . . .8-13 Setting up the Player . . . . . . . . . . . . . . . . . . .8 DVD Player Connections . . . . . . . . . . . . . . . .8 Video and Audio Connections to Your TV . . .8 Audio Connection to Optional Equipment . . .9 Displaying Disc Information on-screen . . .10 Initial Settings . . . . . . . . . . . . . . . . . . .
Introduction To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. This manual provides information on the operation and maintenance of your DVD player. Should the unit require service, contact an authorized service location. About the Cleaning Discs Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center out.
DVD (8 cm / 12 cm disc) Video CD (VCD/SVCD) (8 cm / 12 cm disc) Audio CD (8 cm / 12 cm disc) In addition, this unit plays DVD±R/RW and CD-R/RW, Dual disc that contains audio titles, DivX, MP3, WMA, and/or JPEG files. This indicates a product feature that is capable of playing DVD-RW discs recorded with Video Recording format. Notes: • Depending on the conditions of the recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some CD-R/RW (or DVD±R/RW) discs may not be played on the unit.
Front Panel a b c e f a POWER Switches the unit ON or OFF. c Disc Tray Insert a disc here. b • N (PLAY) Starts playback. d Display window Shows the current status of the unit. • x (STOP) Stops playback. e Remote Sensor Point the remote control here. • . (SKIP) Returns to the beginning of current chapter or track or go to the previous chapter or track. f Z (OPEN / CLOSE) Opens or closes the disc tray. • > (SKIP) Go to the next chapter or track.
Remote Control OPEN/CLOSE (Z) Opens and closes the disc tray. 0-9 numerical buttons Selects numbered options in a menu. CLEAR Removes a track number on the Program List or a mark on the Marker Search menu. TV Control Buttons POWER: Turns the TV on or off. AV: Selects the TV’s source. PR/CH +/–: Selects TV’s channel. VOL +/–: Adjusts TV’s volume. DVD MENU Accesses menu on a DVD disc. TITLE Displays title menu, if available. b / B / v / V (left/right/up/down) Selects an option in the menu.
Installation and Setup Setting up the Player The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. If this occurs, position the player away from the TV, VCR, or radio, or turn off the unit after removing the disc. DVD Player Connections Depending on your TV and other equipment there are various ways you can connect the player. Please refer to the manuals of your TV, stereo system or other devices as necessary for additional connection information.
Audio Connection to Optional Equipment Connect the DVD player to your optional equipment for audio output. Rear of DVD player Amplifier equipped with 2-channel digital stereo (PCM) or audio / video receiver equipped with a multi-channel decoder (Dolby Digital™, MPEG 2, or DTS): Connect one of the DVD Player’s DIGITAL AUDIO OUT jacks ( COAXIAL X) to the corresponding jack on your amplifier. Use an optional digital (COAXIAL X) audio cable.
Displaying Disc Information on-screen You can display various information about the disc loaded on-screen. 1. Press DISPLAY to show various playback information. The displayed items differ depending on the disc type or playing status. Initial Settings By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see the pages 11 to 13.
LANGUAGE Progressive Scan Progressive Scan Video provides the highest quality pictures with less flickering. If you are using the Component Video jacks for connection to a TV or a monitor that is compatible with a progressive scan signal, set Progressive Scan to On. To Turn ON progressive scan: Select a language for the Setup menu and then onscreen display. 1. Select “Progressive Scan” on the DISPLAY menu then press B. Disc Audio / Subtitle / Menu 2. Select “On” using the v / V buttons.
AUDIO LOCK (Parental Control) Each DVD disc has a variety of audio output options. Set the player’s AUDIO options according to the type of audio system you use. Rating Blocks playback of rated DVDs based on their contents. Not all discs are rated. Dolby Digital / DTS / MPEG Bitstream – Select “Bitstream” if you connect this DVD player’s DIGITAL OUT jack to an amplifier or other equipment with a Dolby Digital, DTS or MPEG decoder.
If you forget your password DivX(R) VOD If you forget your password, you can clear it using the following steps: We provide you the DivX® VOD (Video On Demand) registration code that allows you to rent and purchase videos based on the DivX® VOD service. For more information, visit www.divx.com/vod. 2. Input the 6-digit number “210499” and the security code is cleared. Area Code Enter the code of the area whose standards were used to rate the DVD video disc, based on the list on page 21. 1.
Operations General Features Buttons Operations Discs OPEN / CLOSE (Z) Opens or closes the disc tray. PAUSE/STEP (X) During playback, press X to pause playback. ALL Press X repeatedly to play Frame-by-Frame. DVD During playback, press SKIP (. or >) to go to the next chapter/track or to return to the beginning of the current chapter/track. ALL SKIP (. / >) ALL VCD DivX Press SKIP . twice briefly to step back to the previous chapter/track.
Notes on general features: Last Scene Memory • On a Video CD with PBC, you must set PBC to Off on the setup menu to use the repeat function (See “PBC” on page 13). This player memorizes last scene from the last disc that is viewed. The last scene remains in memory even if you remove the disc from the player or switch off the player. If you load a disc that has the scene memorized, the scene is automatically recalled.
Playing an Audio CD or MP3/WMA file This unit can play Audio CDs or MP3/WMA files. MP3/ WMA/ Audio CD Once you insert an MP3/WMA files recorded media or Audio CD, a menu appears on the TV screen. Press v / V to select a track/file and then press PLAY or ENTER and playback starts. You can use variable playback functions. Refer to page 14-15. ID3 TAG • When playing a file containing information such as track titles, you can see the information by pressing DISPLAY.
Programmed Playback The program function enables you to store your favorite tracks from any disc in the player memory. A program can contain 30 tracks. 1. Insert an Audio CD or MP3/WMA files recorded media. AUDIO CD or MUSIC menu appears. 2. Press PROGRAM. The E Playing a DVD VR format Disc This unit will play DVD-R/RW disc that are recorded using the DVD-Video format that have been finalized using a DVD-recorder. This unit will play DVD-RW disc that are recorded using the Video Recording (VR) format.
Moving to another File Viewing a JPEG file This unit can play JPEG files. 1. Insert a JPEG files recording media. The PHOTO menu appears on the TV screen. Press SKIP (. or >) or cursor (b or B) once during viewing a picture to advance to the next or previous file. Zoom During watching pictures, press ZOOM to enlarge the video image (3 steps). You can move through the zoomed picture using b B v V buttons. Rotating the picture 2. Press v / V to select a folder and then press ENTER.
Playing a DivX Movie file Using this DVD Player you can play DivX file. 1. Insert a DivX file recording media. The MOVIE menu appears on the TV screen. DivX disc compatibility with this player is limited as follows: • Available resolution size of the DivX file is under 720x576 (W x H) pixel. • The file name of the DivX subtitle is available by 56 characters. 2. Press v / V to select a folder and then press ENTER. A list of files in the folder appears.
Reference Controlling other TVs with the remote control You can control the sound level, input source, and power switch of your LG TV with the supplied remote control. You can control the sound level, input source, and power switch of non-LG TVs as well. If your TV is listed in the table below, set the appropriate manufacturer code. 1. While holding down TV POWER button, press the number buttons to select the manufacturer code for your TV (see the table below).
Language Codes Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Troubleshooting Possible Cause Symptom Correction No power. • The power cord is disconnected. • Plug the power cord into the wall outlet securely. The power is on, but the DVD player does not work. • No disc is inserted. • Insert a disc. (Check the disc indicator in the display window is lit.) No picture. • The TV is not set to receive DVD signal output. • Select the appropriate video input mode on the TV. • The video cable is not connected securely. • Connect the video cable securely.
DV276-E3M.NA3GLLS_DEU DVD-SPIELER Bedienungsanleitung MODELL : DVX276 Lesen Sie diese Anleitung bitte vor dem Anschluss, der Inbetriebnahme oder der Einstellung des Produktes sorgfältig und vollständig durch.
ACHTUNG STROMSCHLAGGEFAHR NICHT ÖFFNEN ACHTUNG: UM DIE GEFAHR VON STROMSCHLÄGEN ZU VERMEIDEN, DAS GEHÄUSE (BZW. DIE RÜCKSEITE) NICHT ABNEHMEN ES BEFINDEN SI CH KEINE BAUTEILE IM GERÄT, IE VOM BENUTZER REPARIERTWERDEN KÖNNEN. REPARATUREN STETS VOM FACHMANN AUSFÜHREN LASSEN.
Inhalt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 .4 .4 .4 .4 .4 .5 .5 .6 .7 .7 . . . . .7 Installation und Einrichtung . . . .8-13 Einrichtung des Players . . . . . . . . . . . . . . . . .8 DVD-Player-Anschlüsse . . . . . . . . . . . . . . . . .8 Video- und Audioanschlüsse an Ihrem Fernsehgerät . . . . . . . . . . . . . . . . . . . . . . . .8 Audioanschluss an Zusatzgeräte . . . . . . . . . .9 Anzeige von Disc-Informationen auf dem Bildschirm . . . . . . . . . . . . . . . .
Einführung Lesen Sie zur richtigen Bedienung des Gerätes dieses Benutzerhandbuch sorgfältig durch und bewahren Sie es zum späteren Nachschlagen auf. Dieses Handbuch enthält Informationen über die Bedienung und Wartung Ihres DVD-Players. Wenn dieses Gerät repariert werden muss, wenden Sie sich an einen autorisierten Fachhändler. Info über das Symbol dem Bildschirm auf Aufbewahrung von Discs Legen Sie die Disc nach der Wiedergabe wieder in die zugehörige Hülle.
DVD (8 cm / 12 cm-Disc) Video CD (VCD/SVCD) (8 cm / 12 cm-Disc) Audio CD (8 cm / 12 cm-Disc) Zusätzlich können auf diesem Gerät DVD±R/RW-, CD-R/RW- und Dual-Discs mit Audiotiteln, DivX-, MP3-, WMA- und/oder JPEG-Dateien wiedergegeben werden. Dies ist ein Hinweis auf eine Produktfunktion, die im Video-RecordingFormat aufgezeichnete DVD-RW-Discs abspielen kann. Hinweise: • Abhängig von den Voraussetzungen des Aufnahmegerätes oder der CD-R/RW- (bzw. DVD±R/RW-) Disc können bestimmte CD-R/RW- (bzw.
Vorderes Bedienfeld a b c e f a POWER Schaltet das Gerät EIN und AUS. c Disc-Fach Legen Sie die Disc hier ein. b • N (PLAY) Startet die Wiedergabe. d Anzeigefenster Der derzeitige Betriebsmodus des Players. • x (STOP) Hält die Wiedergabe an. e Empfangssensor für das Fernbedienungssignal Richten Sie die Fernbedienung auf diesen Punkt. • . (SKIP) Zum Anfang des aktuellen Kapitels oder Tracks bzw. zurück zum vorherigen Kapitel oder Track. f Z (OPEN / CLOSE) Öffnet und schließt das Disc-Fach.
POWER-Taste Schaltet den DVD-Player ein und aus. OPEN/CLOSE-Taste (Z) Öffnet und schließt das Disc-Fach. Nummerntasten 0-9 Wählt nummerierte Menüpunkte aus. CLEAR-Taste Entfernt eine Track-Nummer aus der Programmliste oder eine Markierung aus dem Menü Markierungssuche. TV-Steuerungstasten POWER: TV-Gerät ein- oder ausschalten. AV: Auswahl TV-Quelle. PR/CH +/–: Auswahl TV-Kanal. VOL +/–: Einstellung der TV-Lautstärke. DVD MENU Zugriff auf das Menü einer DVD-Disc.
Installation und Einrichtung Einrichtung des Players Bild und Ton eines Fernsehgerätes, eines Videorekorders oder eines Radios in der Nähe können verzerrt wiedergegeben werden. Ist dies der Fall, stellen Sie den Player nicht in der Nähe eines Fernsehgerätes, Videorekorders oder Radios auf, oder schalten Sie das Gerät nach der Entnahme der Disc aus. DVD-Player-Anschlüsse Die Anschlussmöglichkeiten des Players richten sich nach Ihrem Fernsehgerät und anderen Geräten.
Audioanschluss an Zusatzgeräte Sie haben die Möglichkeit, den DVD-Player zur Audioausgabe an Ihre Zusatzgeräte anzuschließen. Digitaler Mehrkanal-Ton Ein digitaler Mehrkanal-Anschluss bietet die beste Tonqualität. Sie benötigen dafür einen MehrkanalAudio-/Video-Empfänger, der eines oder mehrere der von Ihrem DVD-Player unterstützten Audioformate, z. B. MPEG 2, Dolby Digital und DTS, unterstützt. Hinweise finden Sie in der Begleitdokumentation des Receivers und auf den Logos auf seiner Vorderseite.
Anzeige von Disc-Informationen auf dem Bildschirm Auf dem Bildschirm können verschiedene Informationen über die eingelegte Disc angezeigt werden. 1. Drücken Sie auf DISPLAY, um verschiedene Wiedergabeinformationen einzublenden. Je nach eingelegter Disc oder Wiedergabeart werden unterschiedliche Informationen angezeigt. Grundeinstellungen Mit Hilfe des Setup-Menüs können Sie beispielsweise das Bild und den Ton einstellen. Außerdem können Sie eine Sprache für die Untertitel und das Setup-Menü einstellen.
SPRACHE Progressive Scan Progressive Scan-Video liefert die bestmögliche Bildqualität mit geringerem Flimmern. Wenn die Component Video-Buchsen zum Anschluss an ein Progressive Scan-kompatibles TV- oder Monitor-Gerät verwendet werden, ist Progressive Scan eingestellt. So schalten Sie Progressive Scan ein: Wählen Sie eine Sprache für das Setup-Menü und die Bildschirmmenüs aus. 1. Wählen Sie “Progressive Scan” im Menü ANZEIGE und drücken Sie B. Disc Audio / Untertitel / Menü 2.
AUDIO BLOCK (Kindersicherung) Jede DVD-Disc hat mehrere Audio-Ausgabeoptionen. Legen Sie die AUDIO-Optionen des Players in Übereinstimmung mit dem Typ des Audiosystems fest, das Sie einsetzen. Einstufung Verhindert die Wiedergabe von nicht jugendfreien DVDs. Es sind jedoch nicht alle DVDs eingestuft.
Wenn Sie das Kennwort vergessen haben DivX(R) VOD Falls Sie das Kennwort vergessen haben, kann es mit folgenden Schritten gelöscht werden: Sie erhalten von uns einen DivX® VODRegistrierungscode (Video On Demand), mit dem Sie Filme über den DivX® VOD-Dienst ausleihen oder kaufen können. Weitere Infos erhalten Sie unter www.divx.com/vod. 2. Geben Sie die sechsstellige Nummer “210499” ein und drücken Sie ENTER. Das Kennwort wird gelöscht.
Betrieb Allgemeine Funktionen Tasten Funktionen OPEN / CLOSE (Z) Disc-Fach öffnen und schließen. (ÖFFNEN/SCHLIESSEN) Discs ALL PAUSE/STEP (X) (PAUSE/EINZELBILD) Drücken Sie zum Unterbrechen der Wiedergabe auf X. ALL Drücken Sie zur Einzelbildwiedergabe mehrmals auf X. DVD SKIP (. / >) (ÜBERSPRINGEN) Drücken Sie während der Wiedergabe auf SKIP (. oder >), um zum nächsten Kapitel/Track bzw. zum Anfang des aktuellen Kapitels/Tracks zu gelangen. ALL VCD DivX Drücken Sie zweimal kurz auf SKIP .
Speicher für letzte Szene DVD ACD VCD1.1 Der Player speichert die letzte Szene der letzten Disc, die wiedergegeben wird. Die Szene bleibt so lange gespeichert, bis Sie die Disc aus dem Player nehmen oder ihn ausschalten. Wenn Sie eine Disc mit der gespeicherten Szene laden, wird sie automatisch aufgerufen. Hinweis: Dieser Player speichert die Einstellung nicht auf einer Disc, wenn Sie den Player ausschalten, bevor Sie die Wiedergabe der Disc starten.
Wiedergabe einer Audio-CD oder MP3-/WMA-Datei Mit diesem Player können Audio-CDs oder MP3-/ WMA-Dateien wiedergegeben werden. MP3/ WMA/ Audio-CD Bei eingelegter MP3-/WMA-Disc oder Audio-CD wird ein Menü eingeblendet. Wählen Sie mit v / V einen Track/eine Datei und drücken Sie zur Wiedergabe auf PLAY bzw. ENTER. Dabei stehen verschiedene Wiedergabefunktionen zur Verfügung (siehe Seite 14-15). ID3 TAG • Beim Abspielen einer Datei, die z. B.
Programmierte Wiedergabe Mit der Programmfunktion können Sie Ihre Lieblingstracks beliebiger Discs im DVD-Player speichern. Es können 30 Tracks programmiert werden. 1. Legen Sie die Audio CD-bzw. MP3-/WMA-Disc ein. Daraufhin erscheint das AUDIO CD- bzw. das Musikmenü. 2. Drücken Sie auf PROGRAM. Daraufhin erscheint das Symbol E . Hinweis: Drücken Sie zum Verlassen des Programmierungsmodus erneut auf PROGRAM. Daraufhin wird das Symbol E ausgeblendet.
Anzeige von JPEG-Dateien Zu einer anderen Datei wechseln Mit diesem Gerät können JPEG-Dateien angezeigt werden. Drücken Sie während Bildanzeige einmal auf SKIP (. oder >) bzw. die Taste (b oder B), um zur nächsten bzw. vorherigen Datei zu springen. 1. Legen Sie die Disc mit den enthaltenen JPEGDateien ein. Das Fotomenü wird auf dem Fernsehbildschirm angezeigt. Zoom Drücken Sie während der Wiedergabe auf ZOOM, um das Videobild zu vergrößern (3 Stufen).
Wiedergabe von DivX-Filmen Mit diesem DVD-Player können DivX-Dateien wiedergegeben werden. 1. Legen Sie die Disc mit der enthaltenen DivXAufnahme ein. Daraufhin wird das Menü FILM auf dem Bildschirm angezeigt. Die Kompatibilität dieses DVD-Players mit DivXDiscs unterliegt folgenden Einschränkungen: • Die Auflösung einer DivX-Datei muss unterhalb von 720 x 576 (BxH) Bildpunkten liegen. • Die Länge des Dateinamens des DivX-Untertitels darf 56 Zeichen nicht überschreiten.
Referenzinformationen Andere TV-Geräte über die Fernbedienung bedienen Lautstärke, Eingangsquelle und das Ein-/Ausschalten des LG TV-Gerätes können über die mitgelieferte Fernbedienung bedient werden. Lautstärke, Eingangsquelle und das Ein-/Ausschalten von Nicht-LG TV-Geräten können ebenfalls bedient werden. Wenn Ihr TV-Gerät in der folgenden Liste aufgeführt wird, stellen Sie den entsprechenden Herstellercode ein. 1.
Sprachcodes Geben Sie die Codenummer der gewünschten Sprache für die folgenden Grundeinstellungen ein: Disc Audio, Disc Untertitel, Disc Menü.
Störungsbehebung Lösung Mögliche Ursache Störung Kein Strom. • Netzkabel nicht eingesteckt. • Stecken Sie das Netzkabel in eine Steckdose. DVD-Player ist eingeschaltet, funktioniert aber nicht. • Keine Disc eingelegt. • Legen Sie eine Disc ein. (Die Disc-Anzeige im Anzeigefenster muss leuchten.) Kein Bild. • Fernseher nicht auf DVD-Betrieb umgeschaltet. • Wählen Sie den entsprechenden Videomodus am Fernseher aus. • Das Videokabel wurde nicht richtig angeschlossen.