ENGLISH OWNER’S MANUAL DVD Player Please read this manual carefully before operating your set and retain it for future reference.
1 Getting Started Getting Started 3 Safety Information CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Getting Started This device is equipped with a portable battery or accumulator. 1 Getting Started Safety way to remove the battery or the battery from the equipment: Remove the old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points.
Table of Contents Table of Contents 4 Operating 14 14 14 14 14 15 15 15 16 16 On-Screen display – Displaying content information onscreen General Playback – Playing Disc – Playing USB Device General operation Advanced Playback – Movie – Music – Photo 5 Troubleshooting 17 Troubleshooting 1 Getting Started 3 6 6 6 6 6 7 8 8 8 9 Safety Information Introduction – Symbols Used in this Manual – About the “&” Symbol Display – Regional Code – Playable Discs – File compatibility Front panel Rear panel S
Getting Started Introduction 1 Symbols Used in this Manual Getting Started A section whose title has one of the following symbols are applicable only to the disc represented by the symbol. r DVD-Video, DVD±R/RW t Audio CDs Playable Discs DVD-VIDEO (8 cm / 12 cm disc) Discs such as movies that can be purchased or rented. DVD±R (8 cm / 12 cm disc) -- Video mode and finalized only -- Supports the dual layer disc also -- DVD±R discs that contain Movie, Music or Photo files.
Getting Started File compatibility 7 PHOTO Recommended size: less than 2 MB Overall yy The file name is limited to 20 characters. yy Depending on the size and number of the files, it may take several minutes to read the contents on the media. Maximum Files/Folder: Less than 600 (total number of files and folders) CD-R/RW, DVD±R/RW Format: ISO 9660+JOLIET MOVIE Available resolution size: 720 x 576 (W x H) pixels Playable subtitle: SubRip (.srt / .txt), SAMI (.smi), SubStation Alpha (.ssa/.
Getting Started Front panel 1 ͦ Getting Started d B (Open / Close) z (Play) C/V (Skip) Z (Stop) 1 (Power) a Disc Tray b Display window c Remote sensor e USB Port Rear panel 5 a Power Cord d Video Out b 2CH Audio Out (Left/Right) e Component Video Out (Y PB PR) c Digital Audio Out (COAXIAL) Supplied Accessories RCA Video/Audio cable (1) Remote control (1) Battery (1)
Getting Started 9 Remote control • • • • • • • • • • c • • • • • • • • • • DVD MENU : Accesses or exits the DVD menu. DISPLAY: Accesses On-Screen Display. x (RETURN): Returns the former menu or exits the menu, and change to the USB mode. wsad (Direction buttons): Selects an option in the menu. b (ENTER): Confirms menu selection. • • • • • • • • • • d • • • • • • • • • • [ (AUDIO): Selects an audio language or audio channel. ] (SUBTITLE): Selects a subtitle language.
Connecting Connecting to your TV Connecting Video / Audio cable 2 Connect the VIDEO/AUDIO OUT on the unit to VIDEO/AUDIO IN on TV with AV cable, such as VIDEO with yellow, AUDIO Left/Right with white/ red. Connecting Component Video cable Connect the COMPONENT VIDEO OUT on the unit to COMPONENT VIDEO IN on TV with COMPONENT cable, such as Y with green, Pb with blue, and Pr with red.
Connecting Connecting to an Amplifier Connecting Audio cable Connect the AUDIO OUT on the unit to 2CH AUDIO IN on amplifier with Audio cable, such as AUDIO Left/Right with white/red 11 Connecting COAXIAL (digital audio) cable Connect the COAXIAL (digital audio out) on the unit to Digital Audio IN (COAXIAL) on amplifier with COAXIAL cable. OPTICAL Amplifier/ Receiver Audio Cable Rear of the Unit Rear of the Unit yy If your TV is not capable of handling 96 kHz sampling frequency, set the [Sample Freq.
3 12 System Setting System Setting Setup When the unit is turned-on at the first time, you have to select the desired language. (optional) Adjust the settings You can change the settings of the player in the [SETUP] menu. 1. Press SETUP. 2. Select the first setup option using ws and press d to move to the second level. 3 3. Select a second setup option using ws and press d to move to the third level. System Setting 4. Select a desired setting using ws and press ENTER to confirm. 5.
System Setting DRC (Dynamic Range Control) [OTHERS] Menu To adjust the volume level by itself when Audio level reaches to more than the specific level (Dolby Digital only). B.L.E (Black Level Expansion) Vocal To mix the vocal with music using the multichannel karaoke DVD. [LOCK] Menu Rating Input the 4-digit password and press ENTER. Select the level from 1(Kids) to 8 (Adult). Change Password Input the former 4-digit password. Input the new 4-digit password and input it again to verify.
4 14 Operating Operating On-Screen display General Playback You can display and adjust various information onscreen about the loaded disc and USB Device. Playing Disc Displaying content information on-screen ry 1. Press DISPLAY to see the various playback information. 2. Select an available contents by pressing wsad and ENTER. 3. Change an available content by pressing the numerical button and ENTER. 4. Press DISPLAY to escape from playback information.
Operating General operation 15 Advanced Playback Movie ry To Do this To Do this Playback Press z Press DVD MENU (DVD Only). Pause Press M Display disc menu Stop Press Z Press REPEAT during playback. Skip to the next or previous Press C or V during playback Play repeatedly Fast / slow playback forward Press v during playback Resume playback Press Z during playback to save the stopped point.
Operating Music tu To Do this Play repeatedly Press REPEAT during playback. Press REPEAT repeatedly. yy Track/ ALL/(REPEAT Off ) Create or Press PROGRAM on stop mode, delete your and then E will be displayed on own program screen. Select the desired one or more files or tracks by pressing ENTER. If you want to delete undesired list, yy One file: Select the file and press CLEAR. yy All file: Select [Clear All] and press ENTER.
5 Troubleshooting Troubleshooting 17 Troubleshooting Symptom Cause Solution The power cord is disconnected. Plug the power cord. The unit does not start playback. An unplayable disc is inserted. Insert a playable disc. (Check the disc type and regional code.) The rating level is set. Change the rating level. The remote control does not work properly. The remote control is not pointed at the remote sensor on the unit. Point the remote control at the remote sensor of the unit.
6 18 Appendix Appendix Area Code List Choose an area code from this list.
Appendix 19 Language Code List Use this list to input your desired language for the following initial settings: [Disc Audio], [Disc Subtitle] and [Disc Menu].
Appendix Specifications Power requirements AC 200 - 240 V, 50/60 Hz Power consumption 11 W Dimensions (W x D x H) Approx. (430 x 200 x 35) mm Net Weight (Approx.) 1.5 kg Operating temperature 0 °C to 40 °C Operating humidity 5 % to 90 % Laser Semiconductor laser Signal system PAL / NTSC Bus Power Supply (USB) 5 V 0 500 mA Video Out 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1 Component Video Out (Y) 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1, (Pb)/(Pr) 0.
