ENGLISH OWNER’S MANUAL LED LCD MONITOR Please read this manual carefully before operating your set and retain it for future reference. LED LCD MONITOR MODELS E2391VR www.lg.
TABLE OF CONTENTS CONTENTS ENGLISH ENG 3 ASSEMBLING AND PREPARING 3 Unpacking 4 Parts and buttons 6 Setting up the Monitor set 6 - Mounting on a table 8 USING THE MONITOR SET 8 Connecting to a PC 8 - D-SUB connection 9 - HDMI connection 9 - DVI to HDMI connection 10 CUSTOMIZING SETTINGS 10 Accessing The Main Menus 11 Customizing Settings 11 - Menu Settings 13 - DUAL MONITOR Settings 13 - DUAL WEB Settings 14 - SUPER+ RESOLUTION Settings 14 - Volume Settings (Only supp
ASSEMBLING AND PREPARING 3 ASSEMBLING AND PREPARING Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. CD(Owner's Manual) / Card D-SUB Cable (This signal cable may be attached to this product before shipping out.) Power Cord HDMI to DVI Cable (This cable is not included in all countries.
ASSEMBLING AND PREPARING Parts and buttons ENGLISH ENG (Power Button) Power Indicator y yLighting On: Turned on y yLighting Off: Turned off DC-IN / D-SUB DC-IN / 䏳㵎幑‣ 䏳㵎幑‣ D-SUB HDMI Button (See p.10) HDMI DVI-D Connection panel (See p.
ASSEMBLING AND PREPARING Button 5 Description Accesses the main menus.(See p.11) Left First Button OSD LOCKED/ UNLOCKED SUPER+ RESOLUTION Use this button to enter SUPER+ RESOLUTION menu. For more information.(See p.14) SUPER ENERGY SAVING Use this button to enter SUPER ENERGY SAVING menu. For more information.(See p.15) AUTO When adjusting your display settings, always press the AUTO button on the MONITOR SETUP OSD.
ASSEMBLING AND PREPARING Setting up the Monitor set ENGLISH ENG Mounting on a table 1 Lift and tilt the Monitor set into its upright position on a table. WARNING When you adjust the angle, do not hold the bottom of the Monitor set frame as shown on the following illustration, as may injure your fingers. Leave a 10 cm (minimum) space from the wall for proper ventilation. 10 cm 10 cm 10 cm 10 cm Do not touch or press the screen when adjusting the angle of the monitor.
ASSEMBLING AND PREPARING 7 Using the Kensington security system Connect the Kensington security system cable between the Monitor set and a table. NOTE The Kensington security system is optional. You can obtain it from most electronics stores. ENG ENGLISH The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com .
USING THE MONITOR SET USING THE MONITOR SET NOTE ENGLISH ENG When using a D-Sub signal input cable yy connector for Macintosh Connecting to a PC Your Monitor set supports Plug & Play*. yy *Plug & Play: A PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention. D-SUB connection Transmits analog video from your PC to the Monitor set.
USING THE MONITOR SET HDMI connection DC-IN / 䏳㵎幑‣ D-SUB HDMI NOTE If you use HDMI PC, it can cause compatibility yy problem. When you want to use two PC in our Monitor, yy please connect the signal cable(D-SUB/ HDMI) respectively in Monitor set. If you turn the Monitor set on while it is cold, yy the screen may flicker. This is normal. Some red, green, or blue spots may appear yy on the screen. This is normal.
CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS ENGLISH ENG Accessing The Main Menus 1 Press any button on the stand base of the Monitor set to display the MONITOR SETUP OSD menu. 2 Press the desired menu item. 3 Change the value of the menu item by pressing the buttons on the stand base of the Monitor set. To return to the upper menu or set other menu items, use the up arrow ( ) button. 4 Select EXIT to leave the OSD menu. Stand base of the Monitor set Buttons MENU (See p.11) Sets the screen options.
CUSTOMIZING SETTINGS Customizing Settings MENU BRIGHTNESS ORIGINAL RATIO COLOR PRESET BLACK LEVEL LANGUAGE SOUND RTC POWER INDICATOR BUTTON INDICATOR DUAL PACKAGE FACTORY RESET 1 Press any button on the stand base of the Monitor set to display the MONITOR SETUP OSD menu. 2 Press the MENU button to display the options in the OSD menu. 3 Set the options by pressing the ◄ or ► or ▼ buttons. 4 Select EXIT to leave the OSD menu.
CUSTOMIZING SETTINGS ENGLISH ENG Menu Analog HDMI Description ● ● If you set ON, you enable the Response Time Control function and reduce the afterimage of the screen. If you set OFF, you disable the Response Time Control function and operate at panel response time. POWER INDICATOR ● ● Use this function to set the power indicator on the stand base of the monitor to ON or OFF. If you set OFF, it will be turned off.
CUSTOMIZING SETTINGS DUAL MONITOR Settings 13 DAUL PACKAGE ► DUAL MONITOR ENG ENGLISH 1 Press any button on the stand base of the Monitor set to display the MONITOR SETUP OSD menu. 2 Press the MENU button to display the options in the OSD Menu. OFF 3 Select DUAL PACKAGE by pressing the ▼ button. EXTENDED CLONE 4 Enter to DUAL PACKAGE by pressing the ► button. EXIT 5 Set the options by pressing ▼ and then ◄ and ► buttons. 6 Select EXIT to leave the OSD menu.
CUSTOMIZING SETTINGS SUPER+ RESOLUTION Settings SUPER+ RESOLUTION ENGLISH ENG 1 Press any button on the stand base of the Monitor set to display the MONITOR SETUP OSD menu. NORMAL 2 Press the SUPER+ RESOLUTION button to display LOW MEDIUM the options in the OSD menu. HIGH EXIT 3 Set the options by pressing ◄ or ► buttons. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button.
CUSTOMIZING SETTINGS SUPER ENERGY SAVING Settings 15 SUPER ENERGY SAVING ENG ENGLISH 1 Press any button on the stand base of the Monitor set to display the MONITOR SETUP OSD menu. ON 2 Press the SUPER ENERGY SAVING button to display the options in the OSD Menu. 3 Set the options by pressing ◄ or ► buttons. SUPER SAVING : 5 W/h LED SAVING : 12 W/h OFF RESET TOTAL POWER REDUCTION: 20 W TOTAL CO2 REDUCTION: 16 g 4 Select EXIT to leave the OSD menu.
TROUBLESHOOTING ENGLISH ENG TROUBLESHOOTING Check the following before calling for service. No image appears Is the power cord of the display connected? Is the power indicator light on? Is the power indicator red? Do you see an "OUT OF RANGE" message on the screen? Do you see a "CHECK SIGNAL CABLE" message on the screen? y y Check and see if the power cord is connected properly to the power outlet. y y Press the Power button.
TROUBLESHOOTING 17 Is the image not shown in full on the y y Access the MENU and make sure that the ORIGINAL RATIO option is screen? Or is a part of the image set to WIDE. truncated? y y This option can be disabled for some resolutions. In this situation, check the video card's aspect ratio. CAUTION The setting method can differ by computer, O/S (Operating System). yy In this case, please ask to the computer or the video card manufacturer.
SPECIFICATIONS ENGLISH ENG SPECIFICATIONS Display Screen Type Sync Input Pixel Pitch Horizontal Frequency Vertical Frequency Video Input Resolution Plug & Play Power Consumption Input Form Signal Input Input Form Max 58.4 cm (23 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 58.4 cm 0.265 mm x 0.265 mm (Pixel Pitch) 30 kHz to 83 kHz (Automatic) 56Hz to 75Hz (D-SUB, DVI to HDMI) 56Hz to 61Hz (HDMI) Separate Sync.
SPECIFICATIONS 19 Preset Modes (Resolution) ENG ENGLISH PC(D-SUB / HDMI) Timing Display Modes (Resolution) Horizontal Frequency(kHz) Vertical Frequency(Hz) Polarity(H/V) 720 x 400 31.468 70 -/+ 640 x 480 31.469 60 -/- 640 x 480 37.500 75 -/- 800 x 600 37.879 60 +/+ 800 x 600 46.875 75 +/+ 1024 x 768 48.363 60 -/- 1024 x 768 60.123 75 +/+ 1152 x 864 67.500 75 +/+ 1280 x 1024 63.981 60 +/+ 1280 x 1024 79.976 75 +/+ 1680 x 1050 65.290 60 -/+ 1920 x 1080 67.
PROPER POSTURE ENGLISH ENG PROPER POSTURE Proper posture for using the Monitor set. Adjust the Monitor set and your posture to allow you to view images at the optimal viewing angle. Place your hands gently on the keyboard, keeping your arms bent at the elbows and horizontally outright. Adjust the location of the Monitor set to avoid it reflecting light.
Make sure to read the Safety Precautions before using the product. Keep the Owner’s Manual (CD) in an accessible place for future reference. The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service. MODEL SERIAL ENERGY STAR is a set of power-saving guidelines issued by the U.S.Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc.