LG-Nortel GDC-400 User manual 3
The purpose of this manual is to give a user the right way to use a GDC-400H wireless terminal and its accessories. This manual lists the matters that a user has to avoid for right use and explains the features of the wireless terminal as a terminal of ipLDK24/100/300/300E systems. The features which are explained in this manual describe the user-interface for ipLDK series DECT key system of local sale. Also it illustrates the specifications of the terminal and its accessories.
Table of Contents 1. UNPACKING ........................................................................... 16 2. PHONE OVERVIEW................................................................ 17 2.1 FRONT AND BACK VIEW OF HANDSET ....................................................... 17 2.2 DESCRIPTION OF BUTTON ......................................................................... 18 2.3 LCD DISPLAY .......................................................................................... 20 2.
Table of Contents 4.8 GO TO DTMF FUNCTION .......................................................................... 31 4.9 ADJUST EARPIECE VOLUME ..................................................................... 31 4.10 MICROPHONE MUTING ............................................................................ 32 4.11 ADJUST RINGER VOLUME ....................................................................... 32 4.12 HANDSET POWER ON POWER OFF ........................................................
Table of Contents 6.5.9 Edit Co Code ...................................................................................46 6.5.10 Missed Call Mode ..........................................................................46 6.5.11 Range Out beep ............................................................................46 6.5.12 Clock Display.................................................................................46 6.6 DIRECT CALL...................................................................
Table of Contents 7.13 ANSWERING A CALL WAIT WITH VOICE OVER ......................................... 53 7.14 WAKE-UP CALL ...................................................................................... 54 7.14.1 To Register Wake-up Call ..............................................................54 7.14.2 To Register Wake-up Time ............................................................54 7.14.3 To Cancel Wake-up Call ................................................................54 7.
Table of Contents 10.2 HAND-HELD TYPE WIRELESS TERMINAL (GDC-400H) SPECIFICATION ... 67 10.3 CHARGER(400-SSC) SPECIFICATION ................................................... 67 11. TROUBLESHOOTING GUIDE ............................................. 68 APPENDIX A. USER MENU TREE ............................................ 70 APPENDIX B. FUNCTION SHORT-KEY TABLE...................... 71 APPENDIX C.
Important Safety Information 10
Important Safety Information 11
Important Safety Information 12
Important Safety Information 13
Important Safety Information 14
Important Safety Information 15
1.Unpacking 1. Unpacking At first, make sure that you have all the parts shown below. 1 2 3 4 5 6 1. Handset 2. Base Unit 3. AC Adapter 4. Battery 2ea 5. User’s Manual 6. Belt Clip Warning This equipment is not designed for making emergency calls when the power fails. Make alternative arrangements for access to emergency services.
2.Phone Overview 2. Phone Overview Descriptions of the important phone components. 2.1 Front and Back View of Handset 1. Earpiece 2. Ring LED 3. Left Soft Button 4. Left Button 5. Talk Button 6. Flash/Clear Button 7. Call Back/Message Button 8. Microphone 9. LCD(Liquid Crystal Display) 10. Up/Down Button 11. Right Soft Button 12. Right/Transfer/Internal Button 13. END/Power Button 14. Speed/Program Button 15. Battery Cover 16.
2.Phone Overview 2.2 Description of Button Button Function [TALK] Try to make a call Î Redial number saved in handset. [END/POWER] Pressing longer than 1 second : Power Off Î Pressing shorter than 1 second :Leave a call back or a message Pressing shorter than 1 second: Ignore an call during incoming. [LEFT SOFT / RIGHT SOFT] You can access to the current functions by pressing the soft button directly below this symbol.
2.Phone Overview Button Function [CALL BACK] Pressing shorter than 1 second : Leave a call back or a message 0~9 [UP/DOWN] Talking Mode : Up / Down the level of Rx volume, Call by name, CLIP Standby Mode : Î In Menu: Navigate and select among function items in a menu or submenu.
2.Phone Overview 2.3 LCD Display The LCD of GDC-400H GAP has 128 x 128 pixels that are capable to display 10 icons and 7 lines x 18 characters per line. The LCD shows different wireless states and displays visual feedback for the actions performed by user. Icon / Description & RSSI Icon ] [Antenna Icon The terminal is locked to a base station and the location registration is finished. Location registration is finished. Even though user may make a call or receive a call, may hear very severe noise.
2.Phone Overview 2.
2.Phone Overview 2.5 Front and Back View of Base Unit 1 Charging terminal Keep the charging terminal clean; Use cotton swab to remove stain from the terminal. 2 Charge / In use lamp Illuminates when the handset is on the base. Blinking when the phone is in use. 1. Adapter jack Connect the adapter to the base.
3.Setting Up 3. Setting Up 3.1 Installing the Battery Before inserting the battery, make sure the polarity is in correct position.(See figure below) Then close the battery cover and push upward until it clicks into place. When you replace the battery, press the latch on the cover and slide down to open. After then replace the new battery. You can purchase new battery in LG-Nortel SVC Center. 3.2 Put the Beltclip into Handset Note You can hang the handset on your belt or pocket using the beltclip.
3.Setting Up 3.3 Connecting the Charger Warning Use only the mains power adaptor supplied. Any other adaptor could damage your GDC-400H and invalid your warranty 1. Adapter 2. To AC OUTLET 3.4 Charging the Handset Please charge the battery for about 12 hours before initial use. The battery charge level is shown at the top right of the LCD screen. Display Icon Battery Status Description Battery is empty Need to be charged(Low) Battery is partially charged(Medium) Battery is fully charged(High) Bat.
3.Setting Up 3.5 Wireless Terminal (GDC-400H) Rubber lid for ear-microphone ♣ A general ear-microphone can be used. Warning Do not insert any external substance except ear-microphone for GDC-400H in the hole. Inserting anything except for ear-microphone provided by general maker may cause severe damage to the terminal.
4.BASIC FUNCTIONS 4. BASIC FUNCTIONS 4.1 Making a Call To make a call by entering numbers on your keypad. 4.1.1 Making a External Call 1) 2) 3) 4) 5) Press button. ” and “EXT” symbol are displayed and you can hear the dial tone. “ Enter the dialing number. Press button again to end the call. The call duration and the current time are displayed. 4.1.2 Making a Internal Call 1) 2) 3) 4) 5) Press the button. “ “ and “INT” symbol are displayed and you can hear the dial tone. Enter the dialing number.
4.BASIC FUNCTIONS 4.2.4 Dialing from Phonebook You can dial the dialing number from Phone book (60 locations). 1) Press the Names ( ) button. 2) Select Find in the Phonebook menu. 3) Search the desired name by the name searching method. 4) Press the OK ( ) button, then “Enter Name: “ is displayed. 5) Enter the desired name. (Ex : “KE” for KENNY). 6) Press the Find ( ) button to search it.
4.BASIC FUNCTIONS 4.3.2 Post Dial 1) ipLDK-24/100 → CO Line Access Code (9, 8+XX or 88+XX) → Phone number → Connection ; (XX means CO line number). 2) ipLDK-300/300E → CO Line Access Code (9,8+XX or 88+XXX) → Phone number →Connection ; (XX means CO Group Number, XXX means CO line number). You may dial telephone number after pressing TALK ( ) button. When pressing CO line access code (9, 8 + XX, or 88 + XX), CO line dial tone is heard. Every time pressing each button, it is displayed on the LCD.
4.BASIC FUNCTIONS 4.4 Answering a Call Receive a phone call using the handset. 1) When the phone is ringing, the “EXT” or “INT” symbol related to the incoming call flashes. In the LCD Message area from system, message from system is displayed. At the same time, in the Local message area, name and CID is displayed. The name is displayed only when there is matched telephone number in the phonebook. The user can accept an incoming internal or external call by pressing the button.
4.BASIC FUNCTIONS 4.5.1 Screened Transfer When the called station answers, inform the transfer. 1) Press END ( ) button to complete the transfer. 4.5.2 Unscreened Transfer When the called station begins to ring, 1) Press END ( ) button to complete the transfer after ring back tone is heard. Then, a message is displayed on the LCD of the called station. If the call is not answered within 30 seconds, recall ring is ringing at both stations.
4.BASIC FUNCTIONS 4.7 Flash During conversation (through CO line or intercom), releasing current call and entering dialing mode can be done at once by Flash. The FLASH button is also used to transfer a CO line call through a PABX. 1) 2) 3) If you are talking with intercom line, press FLASH ( ) button to release a call. Then, dial tone will be heard and you may make another call or do the other operation, for example, programming using system function and so on.
4.BASIC FUNCTIONS 4.10 Microphone Muting During a call, you can mute the microphone. 1) Press the Option ( ) button during a call. The handset displays Call Options menu. 2) Select Mute in the Call Options menu and press the OK ( ) button. 3) The handset displays “MUTED” on the center of the LCD. 4) When you press Enable ( ) button the function is deactivated. 4.11 Adjust Ringer Volume The user can adjust ringer volume in the range 1 ~ 9. 1) Press the Menu ( ) button to enter the menu.
5.Phonebook 5. Phonebook z In the Off-Hook Mode (reference 5.1 Phonebook Menu) While talking, press Option ( ) button and select Phone Book in Call Options menu. In the On-Hook Mode z Press Names ( z Press the DOWN( ) button (reference 5.1 Phonebook Menu) ) button (reference 5.2 Find Phonebook Direct Menu) 5.1 Phonebook Menu There are 4 sub menu. Use UP/DOWN( ) button to select sub menu.
5.Phonebook 5.1.3 Modify z z Search directory to modify (reference 5.1.1 Find). Modify name and number, to use or cancel CO access code or saved position. z English Mode KEY z Number to Repeat 1 2 3 4 5 6 7 8 1 @ : / < > ( ) 1 2 a b c 2 A B C 3 d e f 3 D E F 4 g h i 4 G H I 5 j k l 5 J K L 6 m n o 6 M N O 7 p q r s 7 P Q 8 t u v 8 T U V 9 w x y Z 9 W 0 & $ .
5.Phonebook z Spanish Mode KEY Number to Repeat 1 2 3 4 5 6 7 8 1 @ : / < > ( ) 1 2 a b c 2 A B C á à 3 d e f 3 D E F é è 4 g h i 4 G H I í ì 5 j k l 5 J K L Ç 6 m n o 6 M N O ñ ó 7 p q r s 7 P Q R S 8 t u v 8 T U V ú ù 9 w x y Z 9 W X Y Z 0 .
5.Phonebook 5.1.4 Delete 5.1.4.1 Delete One 1) 2) Search directory to delete (reference 5.1.1 Find). Press Delete ( ) button to delete selected phonebook. 5.1.4.2 Delete All 1) All Phone Book directories will be deleted. 5.2 Find Phonebook Direct menu Press DOWN ( ) button. All Phone Book directory list showed. Using UP/DOWN ( button select phone book and enter option sub menu.
6.Programming Features 6. Programming Features To enter the programming features menu, the user has to press the Menu ( ) button during Idle Mode or during Not Subscribed Mode. During a call, either internal or external, no access to the programming feature is possible. The following list shows the programming features menu structures.
6.Programming Features 6.1.1.3 Delete The user can delete call. 1) In Option mode, select Delete menu press the OK ( ) button. 2) Press the OK ( ) button to delete the selected number. z Selected number is deleted and goes back to the previous menu. 6.1.1.4 Call The user can make a call with the selected number. 1) In Option mode, select Call menu press the OK ( ) button. z Loop is occupied and call is made with the selected number. 6.1.
6.Programming Features 6.1.4.1 Missed Calls The user can delete all Missed Calls. 1) In Option mode, select Missed Calls menu press the OK ( ) button. 2) Press the OK ( ) button to delete all Missed Calls. z All Missed Calls are deleted and goes back to the previous menu. 6.1.4.2 Received Calls The user can delete all Received Calls. 1) In Option mode, select Received Calls menu press the OK ( 2) Press the OK ( ) button to delete all Received Calls. z ) button.
6.Programming Features Î Ringing Type You can hear melodies.(9 melodies) You can choose Ring by pressing the LEFT/RIGHT( ) button. You can set as External/ Internal Ring by pressing the SET ( ) button. Î Volume 9 volumes. You can choose volume by pressing the LEFT/RIGHT( ) button. Display “volume set” in LCD. 2) External Ring There are 2 menus in this menu. z Ringing Type z Volume Î These menus operate in same 6.2.2.1 Ringing Set – 1) Internal Ring menu.
6.Programming Features 6.3.2 Base Choice The wireless terminal, GDC-400H(GAP), can be subscribed to up to 4 GAP systems. However, the wireless terminal can’t use all systems at the same time. Only one system selected by a user is available for using the wireless terminal. This function is to select system that a user wants to use. Please refer to ‘9.6 Change of Subscribed System’ for details.
6.Programming Features 6.3.5.2 Reset Settings 1) 2) 3) 4) Select Reset menu and press OK ( ) button. “HS PIN : ” is displayed. Input “HS PIN” and press OK ( ) button to move into Reset submenus. Select Settings menu and press OK ( ) button. Press OK ( ) button to reset settings. 6.3.5.3 Reset Handset 1) 2) 3) 4) Select Reset menu and press OK ( ) button. “HS PIN : ” is displayed. Input “HS PIN” and press OK ( ) button to move into Reset submenus. Select Handset menu and press OK ( ) button.
6.Programming Features 6.4.2 Modify Text 1) 2) 3) Select Modify Text and press the OK ( ) button. And then you can modify the text. If you finish modifying text, press the OK ( ) button. 6.4.3 Delete 1) 2) 3) Select Delete and press the OK ( ) button. And then “Delete the Appointment” is displayed. If you are sure to delete, press the OK ( ) button. If you don’t want to delete the appointment, press the Back ( ) button. 6.4.4 View Text 1) Select View Text and press the OK ( ) button.
6.Programming Features 6.5 Phone Settings There are 9 menus in this menu. Clock Alarm clock Keypad Tones Display Language Silent Mode Keypad Lock S/W Version Edit CO Code Missed Call Mode RangeOut beep You can enter the desired menu by pressing the OK ( ) button. 6.5.1 Clock You should enter the present time to see the correct time in the phone. 1) Select Clock and press the OK ( ) button. 2) Enter the date as day, month and year.
6.Programming Features 3) 4) 5) 6) 7) Dialing color When you set this function each number is displayed on screen with a different color. If you want to change the contrast, select Contrast Set and press the OK ( ) button. And then change the contrast with the LEFT/RIGHT( ) buttons, and press the OK ( ) button. If you want to change the lighting, select Lighting Set and press the OK ( ) button.
6.Programming Features 6.5.8 S/W Version Selecting this sub-menu displays current software version on the LCD. 6.5.9 Edit Co Code A user can edit 4 CO access codes for each system. This means CODE-1 is for Base 1, CODE-2 is for Base 2 and CODE-4 is for Base 4. It is used when you select CO code to “yes” in phonebook. In the case of “yes”, you need not insert CO access code like ‘0’ in a telephone number. Automatically, this code number will be added for outgoing call.
7.Key System Functions 7. Key System Functions 7.1 Call Park A user can park using intercom call or CO line to CO line parking location. 7.1.1 Call Park While connected to an outside call; 1) Press TRANS ( ) button shorter than 1 second. 2) Dial a parking location. 3) The intercom call or CO line being used is on hold and the wireless terminal goes to an idle state. 7.1.2 Retrieving a parked call 1) 2) Press TALK ( ) or Accept ( Dial the parked location. ) button. 7.1.
7.Key System Functions 7.3 Answering a Message Waiting Indication If a message is displayed on the LCD, it indicates that a message is left to you. The first left message will be answered at first. 1) Press TALK ( ) button. 2) Press CALL BACK ( ) button. 3) The station that has left a message will be ringing if a station message has left. 4) If VMIB message has left, the first left VMIB message is heard.
7.Key System Functions 3) 4) Press SPEED ( ) button shorter than 1second. Dial speed bin number. (ipLDK-24/100/300/300E: 000~099) (Only available speed bin is displayed on the LCD. And only one speed bin number is displayed at every time using this function.) 5) Dial a phone number to be stored. 6) Press PROGRAM ( ) button longer than 1 second. 7) Enter the dial name. ( Refer to “programming a name into display”) 8) Press PROGRAM ( ) button longer than 1 second. 9) Press END ( ) button.
7.Key System Functions 7.6 System Redial 7.6.1 To Redial Saved Number 1) 2) 3) Press TALK ( Press SPEED ( Press . ) button. ) button shorter than 1 second. Caution This feature doesn’t work at the intercom call. 7.6.2 To Redial Last Number The last dialed number to outside lines is saved automatically. To redial the number, 1) Press TALK ( ) button. 2) Press SPEED ( ) button shorter than 1 second and press . 3) Press UP/DOWN ( ) to find a phone number. (Max.
7.Key System Functions 7.7 Call Forward When a user can’t receive calls, a user can forward all user’s calls to another subscriber’s station. 1) 2) Press TALK ( Press 3) Press the call forward type: Call Forward Type Call Forward Condition 0 Follow me 1 Unconditional 4) 5) ) button. . 2 Busy calls 3 No answer calls 4 Busy/No answer calls Call Forward Destination Station No.
7.Key System Functions 7.9 Authorization Code 7.9.1 To Register Access Authorization Code To prevent unauthorized outside call (DISA access or Trunk Access), a user can lock/unlock a station with an access authorization code. 1) Press TALK ( ) button. 2) Press PROGRAM ( ) button longer than 1 second and press . 3) Dial the station’s 5-digit Access Authorization code. 4) Press PROGRAM ( ) button longer than 1 second. (Confirmation tone will be heard.
7.Key System Functions 7.10.2 Restoring Outside Calls 1) 2) 3) 4) Press TALK ( ) button. Press PROGRAM ( ) button longer than 1 second and press . Dial the current Access Authorization code. Press PROGRAM ( ) button longer than 1 second (Confirmation tone will be heard). Note An access authorization code should be registered. STOP! ; If a user forgets the access authorization code, only the admin station can restore it. 7.
7.Key System Functions 7.14 Wake-up Call 7.14.1 To Register Wake-up Call The system automatically sends ring signal to a station that already registered a wake-up time. Two kinds of wake-up call exist; effective for one-day or effective until canceled. 7.14.2 To Register Wake-up Time 1) 2) 3) 4) 5) Press TALK ( ) button. Press PROGRAM ( ) button longer than 1 second. Press and 4 digits wake-up time (HHMM) in 24-hour mode. (HH = 00~23, MM = 00~59) Press for permanent use.
7.Key System Functions 7.16 Paging 7.16.1 To page 1) 2) 3) 4) Press TALK ( ) button. Dial page zone. (See the below table. Confirmation tone will be heard.) After the tone, speak in a normal tone of voice. Press TALK ( ) button.
7.Key System Functions 7.18 Station Program Recovery This function is to recover the previously programmed data. It will be certified by LCD display. The followings are programmed data to be recovered. Station number. Idle LCD message. Message icon. FORWARD message format. DND message format. 1) Press TALK ( ) button. 2) Press PROGRAM ( ) button longer than 1 second. z Press - Confirmation tone will be heard. - Station number and idle message will be displayed on the LCD.
7.Key System Functions 7.20 Programming User Custom Message A user may program a custom message to be displayed on the LCD of calling terminal. 1) Press TALK ( ) button. 2) Press PROGRAM ( ) button longer than 1 second. 3) Press . 4) 5) 6) (Confirmation tone will be heard.) Enter the message. (Up to 10 letters can be entered by using codes shown in the above “Programming A Name Into Display”) Press PROGRAM ( ) button longer than 1 second. (Confirmation tone will be heard.) 7.
7.Key System Functions 7.21.5 To delete the greeting 1) 2) 3) Press TALK ( ) button. Press PROGRAM ( ) button longer than 1 second. Press . 7.21.6 To record a paging message 1) 2) 3) Press TALK ( ) button. Press PROGRAM ( ) button longer than 1 second. Press . 4) 5) Press # to start recording. Press PROGRAM ( ) button longer than 1 second or END ( ) button. Caution This feature should be programmed at the admin station before using. 7.21.7 To delete a paging message 1) 2) 3) Press TALK ( ) button.
8. DECT Functions 8. DECT Functions 8.1 MOBILITY MANAGEMENT FUNCTION 8.1.1 Hand-Over Once a call has been made, it is still necessary to change physical channels without release of the call. Frequency band or time slot can be changed due to quality degradation or interference, the associated base stations can be changed due to the mobility of a user in a multi-cell environment. 8.1.
9. Installation of Wireless Terminal 9. Installation of Wireless Terminal A user should do subscription procedure to use a wireless terminal with key system. The procedure is an auto mode subscription. A user has to get only AC from the system before subscription processing. The details are described in ‘9.2 Subscription’. The wireless terminal is allowed to be subscribed to up to 4 GAP systems.
9. Installation of Wireless Terminal 9.2 Subscription This procedure is for subscribing the wireless terminal to ipLDK-24/100/300/300E WOTS system. To subscribe GDC-400H, you should follow two steps. The First step is making the system be in subscription enabled state. While the system is in subscription enabled state, you should second step. The second step is making GDC-400H to try to subscribe onto the system. At the Attendant Station TRANS/PGM HOLD/SAVE + 0# + Flex. Button 1 + Station No.
9. Installation of Wireless Terminal At the Wireless Terminal Menu ( ) + Select Phone Register menu + Select Subscription + Select empty BASE + AC code + OK ( ) 1) 2) 3) Press Menu ( ) button. Main Menu is displayed on the LCD. Select Phone Register menu by pressing Navigation ( ) button and OK ( ) button. 4) Phone Register menu is displayed on the LCD. 5) Select “Subscription” by pressing UP/ DOWN( ) button and OK ( ) button. 6) Select empty BASE number and press OK ( ) button.
9. Installation of Wireless Terminal 9.3 De-subscription I De-subscription makes a wireless terminal loose access right to the ipLDK-24/100/300/300E WOTS. To de-subscribe the wireless terminal, it should be in an idle state. To De-subscribe At the Attendant Station TRANS/PGM 1) 2) 3) 4) 5) 6) 7) + 0# + Flex. Button 2 + Station No. + HOLD/SAVE Press [TRANS/PGM] button. ([TRANS/PGM] LED flashes and [MON] LED lights steady.) Press 0#. Press Flexible button 2. Enter the station number.
9. Installation of Wireless Terminal 9.4 De-subscription II There is another way to de-subscribe locally. The subscription data of the phone (stored in MPB and WTIB or the wireless terminal) should be erased separately at both sides by 9.3 desubscriptionⅠ procedure. But you lost a phone or MPB and WTIB by accident, you can use this procedure. Then, you should be more careful in doing this procedure. It is because this procedure is for abnormal case.
9. Installation of Wireless Terminal 9.5 Authentication The process by which the identity of a user of the wireless terminal is checked by the system. The User Personal Identification (UPI), manually entered by a user, is used for user authentication. To Authenticate a User At the Attendant Station TRANS/PGM 1) 2) 3) 4) 5) + 0# + Flex.
10. Useful Information 10. Useful Information 10.1 System Specification Standard Frequency band Typical distance from a base station to a wireless terminal Items 1. Board Name System Name ipLDK-24 ipLDK-100 ipLDK300/300E Items System Name ipLDK-24 ipLDK-100 ipLDK300/300E ∗ 2. Max. Cell Number (Base Station Num.) DECT/GAP 1880~1900MHz 70meters 3. Channels/Cell WTIB 3 2 WTIBE 4 4 WTIB (MAX. 2) 4(x2) 5 With WTIU (MAX. 2) 8(x2) 5 WTIBE (MAX.2) 4(x2) 4 With WTIUE (MAX.
10. Useful Information 10.2 Hand-held Type Wireless Terminal (GDC-400H) Specification Item Size: Weight: Color: Maximum power: Modulation method: Battery Talking Mode: Standby Mode: Type: Programmable Ring Type: Display feature Icon: Type: Dialing mode: Phonebook Speed dial numbers: Re-dial numbers: Operating temperature: Spec 133mm ×44mm ×20mm(H ×W ×D) 92g Warm gray 250mW GFSK 15 hours 150 hours DC 2.
11. Troubleshooting Guide 11. Troubleshooting Guide Problem Reason Solution Check the battery then, press the POWER button. Wait until a free channel is released. While connected to a call, z Press UP button. Adjust Ring volume level; z Refer to ‘HS Setting’. Subscribe the terminal. z Refer to ‘9.2 Subscription’. LCD is empty. No power “NO CHANNEL” is displayed when pressing TALK button.
11. Troubleshooting Guide Problem Reason When pressing TALK button, Phone icon ( ) is blinking several times and disappeared. Subscription Disagreement When pressing TALK button, nothing is happened. Out of Range 69 Solution Do desubscribe locally in both sides, the system and the terminal and subscribe the terminal in the system again. 1. Be sure the terminal is locked to a base station. 2. Be sure the system is operating properly.
Appendix Appendix A. USER MENU TREE 1. Call Register 1_1 Missed Call 1_4_1 Missed Calls 1_2 Received Call 1_4_2 Received Calls 1_3 Dialed Call 1_4 Delete Call 2. Images & Sounds 1_4_3 Dialed Calls 1_4_4 All Calls 2_1_1 Wallpaper 1 2_2_1_1 Ringing Type Tone 1 ~ 9 2_1_2 Wallpaper 2 2_2_1_2 Volume Volume 1 ~ 9 2_1 Images 2_1_3 Wallpaper 3 2_2 Sounds 2_1_4 Blank By Ring No Sound 2_2_1 Internal Ring 2_2_2 External Ring 2_2_3 Ring Mode 3.
Appendix Appendix B. Function Short-Key Table 1. Function Short-Key Table related to Key System Call Service * ipLDK-24/100/300/300E FEATURE INPUT KEY Call Transfer (During a call) [TRANS] + STA # + END( Call Waiting/Camp On TALK( ) + STA # + (if busy tone is heard) Call Back TALK( ) + STA # + [CALL BACK] Attendant Call TALK( ) + 0 or Paging DND (Do Not Disturb) Call Forward TALK( ) )+9 Internal Zone ) + 5 + digit ( TALK( Paging’.
Appendix FEATURE INPUT KEY Delete Greeting TALK( ) + [PROGRAM] + 6 + 6 Delete Paging Message TALK( ) + [PROGRAM] + 6 + 7 Universal Night Answer TALK( CO Line Access TALK( )+8+digit(ipLDK-300/300E : 01~72.
Appendix Appendix C. The LCD Messages Related To a Call The followings describe messages displayed on the LCD of an attendant station and the wireless terminal in Talking Mode. At the DKTU 1. NO RESPONSE 1) Description: After key system requests a call to the wireless terminal, if there is no response from the wireless terminal, this message is displayed on the LCD of DKTU. ① Called station: Power-off ② Called station: Out-of-svc area 2. NO CHANNEL 1) Description: There is not enough system resource.
Appendix At the Wireless Terminal 1. NO CHANNEL 1) Description: There is not enough system resource. If the message is displayed frequently on the LCD of DKTU, the system should be installed more. ① There is no available RF channel. ② There is no available PCM Hi-way; MPB side The reason is brought by MPB. 2. INVALID 1) Description: When a not subscribed station is called. The reason is brought by MPB. 3.