Installation Guide & Warranty Model Number | H20J54DT HealthViewTM TV Table of Contents see page 5 Master TV Setup see page 7 Zenith and the lightning Z logo are registered trademarks of Zenith Electronics Corporation © Copyright 2007, LG Electronics U.S.A., Inc.
1-888-865-3026 RECORD THE H20J54DT SERIAL NUMBER The serial number of the HealthViewTM TV is located on the back of the cabinet. For future reference, we suggest that you record the number here: www.lgcommercial.com • www.zenith.com Serial No.___________________________________ For Customer Support/Service, please call: WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
IMPORTANT SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the apparatus. This information shall be given in a language acceptable to the country where the apparatus is intended to be used. The important safety instructions shall be entitled “Important Safety Instructions”.
IMPORTANT SAFETY INSTRUCTIONS 8. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over. PORTABLE CART WARNING 9. Unplug this apparatus during lightning storms or when unused for long periods of time. 10. Refer all servicing to qualified service personnel.
Table of Contents Use this page as a reference for finding the pages or sections to go to and set up the TV’s features for the end user See the Master TV Setup on page 7 This TV functions differently than previous Zenith hospital sets. A Master TV setup must be created and then transferred to the internal TV controller with 2-5-5+Menu. This action will transfer all digital information and add important analog information to the TV controller. Safety Warnings . . . . . . . . . . . . . . . . . . . . .
TV Features Overview A brief overview of the features on this TV Analog and Digital Tuners This TV is equipped with both analog and digital tuners. The analog tuner is used for standard over-the-air antenna and cable type (CATV) sources. The digital tuner is capable of receiving over-the-air digital programming.
H20J54DT Master TV Setup This TV requires a different setup than previous Zenith hospital sets. A Master TV setup must be created and then transferred to the internal TV controller with 2-5-5+Menu. The 2-5-5+Menu action adds to the TV controller important analog setup information and all digital information. (Please refer to the sections mentioned below for more detailed instructions.) Note: The TV is capable of storing in memory up to 140 digital broadcast and 125 analog channels.
Hook Up an Off Air Antenna Connect an over the air signal source to the TV Over-the-Air Antenna 1 Locate the Antenna/Cable and Digital/Antenna jacks on the back of the TV. 2 Connect the RF antenna wires that run from the wall directly to the jacks, according to the connection diagram shown to the right. Typical TV Back Antenna Antenna Cable Antenna If you have a 75 ohm RF cable, then you don’t need any adapters! Digital Antenna TV SPEAKER RF Coaxial Wire (75 ohm) M.P.I. M.P.I.
Hook Up Cable Service (CATV) Connect cable service to the TV Cable Service 1 Locate the RF jacks on the back of the TV set. 2 Connect the CATV cable that runs from the wall to the Antenna/Cable RF jack as shown to the right. Typical TV Back Cable TV Wall Jack The TV digital tuner does not work with a Digital Cable signal source. Antenna Cable Digital Antenna TV SPEAKER RF Coaxial Wire (75 ohm) M.P.I. M.P.I.
Hook Up an Off Air Antenna with VCR Connect an over-the-air signal source to the VCR and TV Over-the-Air Antenna with VCR 1 Locate the Antenna/Cable In jack on the back of the VCR. 2 Connect the antenna that runs from the wall jack directly to this jack, according to the connection diagram shown to the right. Connect a 75 ohm wire to the Digital Antenna input on the TV for digital programming. 3 Make the VCR to TV connections as indicated in the illustration.
Hook Up a Cable Box with VCR Connect a cable box and VCR to the TV Cable TV Wall Jack Cable Service with VCR 1 Locate the In jacks on the cable box and the VCR. 2 Connect a 75 ohm cable between the cable box wall jack and Cable In on the cable box. 3 Connect a 75 ohm cable from the Cable out jack on the cable box to the Ant In jack on the VCR. 4 Connect a 75 ohm cable between the VCR out jack on the VCR and the Antenna/Cable In jack on the TV.
Hook Up Audio/Composite Video Connect the TV to an audio/composite video source Audio/Composite Video 1 Locate the audio/composite video input jacks on the TV. 2 Connect the audio/composite video input jacks to an audio/composite video device as shown in the illustration. Typical TV Back Antenna Cable Composite Audio/Video Device Digital Antenna Left TV SPEAKER M.P.I. M.P.I.
Hook Up an External Speaker Connect the TV to an external speaker or amplifier External Speaker 1 2 Locate the Matrix Out jack on the back of the TV. Connect the Matrix Out jack to an external speaker or audio amplifier as indicated in the illustration. Speaker Back Typical TV Back Audio In Antenna Cable Digital Antenna TV SPEAKER M.P.I. M.P.I.
Pillow Speaker Connection & Setup Pillow speaker is not included with the HealthView TV Pillow Speaker Setup 1 Locate the Pillow Speaker output jack on the back of the HealthView TV. 2 Connect an accessory pillow speaker or wired remote control unit to this 6-pin jack. 3 Connect the pillow speaker as shown in the illustration. 4 Set the Pillow Speaker switch to Pillow Speaker setting. Note: Once the switch is set to Pillow Speaker, no audio will be heard from the TV speakers.
Pillow Speaker Setup Connect a pillow speaker to the TV Pillow Speaker Control Pillow Speaker Interface This connector furnishes three control lines and an audio output. A patient-pendant remote control, or entertainment audio and nurse call system may be connected here. All lines are isolated from the AC power line and earth ground. (Opto-isolators isolate the control lines, and a transformer isolates the audio. There are no relays or inductive components in the control lines.) Pin No.
Optional Installer/User Remote Control Keys descriptions and functions for the optional remote MUTE Turns sound Off and On, while the picture remains. CHANNEL PREVIEW* Allows Parental Control access on analog channels: set V-Chip blocks for analog/digital programming. BANK Selects channel banks 1-2-3-4. POWER Turns TV On or Off. GUIDE Not functional. MUTE POWER CH BANK PREVIEW GUIDE INFO SAP SAP Chooses other digital audio languages if available from broadcaster.
Front Panel Controls Using the front panel controls to operate the TV A Power Turns TV on and off. B Channel (Down/Up) Chooses next available channel. C Volume (Down/Up) Decreases/increases sound level. D CC (Captions/Text) Turns selected caption/text option On and Off. (Depending on TV captions setup.) A power B channel C volume D captions Install Batteries into Remote Control AA AA + + Remove the back of the remote control and install two high-quality AA batteries.
On-Screen Menus/Displays Overview Descriptions of the menus and on-screen status displays Using MENU and the other keys indicated on the optional Installer’s remote, the installer can access the menus/displays described below.
Other Menus and On-Screen Displays Press the remote keys indicated below to access these menus and displays CHANNEL PREVIEW Ch 25 - PBS 7:15 PM MONO VOLUME XDS Information As Available LENGTH 00:32 TIME LEFT 00:42 5 9 20 32 AUX - - - 2 ---CH CC Volume Display Press VOLUME. Shows current sound level. Channel/Time/Audio Display Press ENTER. Shows selected channel or source, time if the clock is set, incoming audio signal, and XDS* info if available on program. For XDS wait 5 seconds and press ENTER.
Auto Program (Channel Search) Note: Use item 3-I Band/AFC in Installer menu to select proper analog tuning band (0=CATV, 1=Broadcast etc.) before running Auto Program. SETUP MENU 1 Using the optional Installer’s remote control, press POWER to turn the TV on. 2 Press MENU repeatedly until the Setup menu appears. 3 Use Up or Down ADJ on the remote control to highlight Auto Program on the menu. 4 Press the Right or Left ADJ arrow to begin the Channel Search.
Add/Delete/Blank Feature Fine-tune the channel selection list by blanking certain channels and deleting other unwanted channels. Note: TV can store in memory 140 broadcast digital and 125 analog channels 1 Use MENU key on optional Installer’s remote to access the Setup menu. 2 Use the Up or Down ADJ key to highlight the Add/Del/Blnk option. 3 Using either the NUMBER keypad and OK or the Channel Up/Down arrow on the remote, select a channel. (If adding a deleted channel, use the NUMBER keypad and OK.
Setting Preset Analog Channel Labels Selecting channel names from the preset Channel Labels SETUP MENU 1 Using either the NUMBER keypad or the Channel Up/Down arrows on the optional Installer’s remote, select an analog channel. 2 Press MENU repeatedly on the optional Installer’s remote until the Setup menu appears. 3 Choose the Ch Labels option using the Up or Down ADJ arrow. 4 5 AUTO PROGRAM ADD/DEL/BLNK CH. LABELS CLOCK SET TIMER CAPTIONS AUDIO LANG.
Analog Preset Channel Labels Typical Analog preset Channel Label options A&E DISC MAX TMC ABC E! ME/U TNN ACTS ENC MMT TNT ADC ESPN MTV TRAV AMC ESP2 NBC TSN BCC ET NICK TVA BET EWTN NOS TWC BRAV FAM PBS UPN CA FNN PLAY USA CBC FOX PTL UC CBN F&V QVC VCR CBS FX RDS VH-1 CMTV GALA REQ VISN CNBC HBO SC VJN CNN HN SCFI WB COM HSE SHOW WGN CSPN HSN SIN WTBS CSP2 IC TBS WWOR CTN INSP TBN YTV CTV JCN TELE DIS LIFE TLC 206-4065 Pag
Setting Custom Labels for Digital Channels Setting channel names for Channel Labels SETUP MENU 1 Using either the NUMBER keypad or the Channel Up/Down arrows on the optional Installer’s remote, select a digital channel. 2 Press MENU repeatedly on the optional Installer’s remote until the Setup menu appears. 3 Choose the Ch Labels option using the Up or Down ADJ arrow. 4 Press Vol right to select the first character space. 5 Use Ch Up/Down to select the character.
Clock Setup (Auto or Manual) Have the TV set the clock time or use Manual Clock Set SETUP MENU AUTO PROGRAM ADD/DEL/BLNK CH. LABELS CLOCK SET TIMER CAPTIONS AUDIO LANG. LANGUAGE TO SET CLOCK CLOCK MENU CLOCK SET TIME ZONE DAY. SAVING USE ADJ USE ADJ SETUP MENU AUTO PROGRAM ADD/DEL/BLNK CH. LABELS CLOCK SET TIMER CAPTIONS AUDIO LANG.
On-Off Timers Setup Set up On/Off Timers Note: On/Off Timers operate independently TIMER SETUP MENU AUTO PROGRAM ADD/DEL/BLNK CH. LABELS CLOCK SET TIMER CAPTIONS AUDIO LANG. LANGUAGE 1 ON TIME 9:00 AM TIMER OFF TIME 7:00 PM TIMER TO SET TIMER On the optional Installer’s remote, press MENU repeatedly until the Setup menu appears. 2 Use Up or Down ADJ to highlight the Timer option then press the Left or Right ADJ arrow. 3 Use Up or Down ADJ to choose an option.
Captions: Analog-Digital (Caption/Text) Setup Overview Set up Closed Caption/Text options for the end user Analog-Digital Closed Captions/Text Overview, End-user Setup The caption/text feature is designed to be available to the end user on either an analog or digital channel. For the end user to get analog captions, all the user needs to do is press CC on the remote and select On - - same for digital channels, select On and pick a language.
Captions: Analog-Digital Menu Structures Review Analog and Digital Captions options available Note: Digital captions are only available on some digital channels. Analog Captions Menu Structure SETUP MENU AUTO PROGRAM ADD/DEL/BLNK CH. LABELS CLOCK SET TIMER CAPTIONS AUDIO LANG. LANGUAGE TO SET CAPTIONS CAPTION SETUP OPER. MODE SEL.
Audio Language for Digital Channels Choose English, Spanish, (Español) or French (Francais) for Digital channels Default Audio: If you select an alternate language, the TV tries to find it. If the alternate language is not available, the TV audio will be the default audio from the program. Typically, if you select Spanish and it is not available, English will be heard. SETUP MENU 1 On the optional Installer’s remote, press MENU repeatedly until the Setup menu appears.
Language for the On-Screen Menus Choose English, Spanish, (Español) or French (Francais) for the on-screen menus SETUP MENU 1 On the optional Installer’s remote, press MENU repeatedly until the Setup menu appears. 2 Use Up or Down ADJ arrow on the remote control to highlight the Language option on the menu. 3 Use the Left or Right ADJ arrow to choose one of the following options: • English • Spanish (Español) • French (Francais) 4 AUTO PROGRAM ADD/DEL/BLNK CH.
Alarm Menu Use the Alarm menu to set a time for the TV to automatically turn itself On ALARM MENU TIME NOW 1 Press Alarm on the optional remote control. 2 Using the NUMBER keypad, set the time you want the TV to turn On. For example, to set 7:30 AM, key in 0, 7, 3, 0. 3 Use TIMER to choose AM or PM, as shown on the menu. 4 3:11 6:10 AM PM TIMER PRESS DIGITS TO SET TIME TIMER TO SELECT AM/PM MUTE POWER CH BANK PREVIEW GUIDE Press OK to remove menu from screen.
Video Menu Use the Video Menu to customize the picture’s appearance 1 On the optional installer’s remote, press the MENU key repeatedly until the Video menu appears. Your options are: VIDEO MENU CONTRAST BRIGHTNESS COLOR TINT SHARPNESS PICTURE PREF • Contrast: Adjusts the level of difference between white and black in the TV picture. The more contrast, the brighter the picture appears. CUSTOM Analog Channel Display • Brightness: Increases or decreases amount of white in the TV picture.
SAP: Additional Digital Audio Program Selection SAP can be used to select other additional digital audio programs, if available News and local programming Thu Jan 19, 2007 4:00 PM Multi-lingual 16:9 1080i 5:50 PM DTV 66-1 Dolby Digital 6:00 PM HD TV-PG Indicates the broadcast may have additional audio programs available. Note: The broadcaster has control of any additional audio programs available. If a program display shows another audio is being broadcast, use the SAP button to select that audio.
Parental Control Menu Overview Use V-Chip to restrict undesirable programming This feature can “block” undesirable programming from appearing on the TV. Set restrictions using Age Block for all programming, TV and movies. Overview Parental Control offers the user a wide variety of options and settings that restrict or “block” the programming that can appear on the TV.
Installer Menu Options For V-Chip Operation V-Chip functionality can be disabled if the password is not known Reset Parental Control Block Hours to Zero and Cancel Password This provides the institution staff and the installer a means to reset the TV to normal operation; if a user has either forgotten the password or has left Parental Control blocks active. (Installer Menu item 0-I Installer Seq must be set to 0 for this to work.
Parental Control Menu After you have read the preceding page, follow instructions below to set up and activate Parental Control Unblocked Blocked 1 TO BLOCK Unblocked G and Above PG and Above PG-13 and Above R and Above NC-17 and Above X Unblocked TV-G and Above TV-PG and Above TV-14 and Above TV-MA Unblocked TV-Y and Above TV-Y7 General Children Dialog Language Sex Scenes Violence F Violence No Rating 00 Hours Unblocked TV-PG and Above TV-14 and Above TV-MA Unblocked TV-Y7 Unblocked Blocked To Se
Parental Control TV/Movie Rating Guidelines TV Parental Guidelines Rating System TV-G General Audience Considered suitable for all audiences; children may watch unattended. TV-PG Parental Guidance Suggested Unsuitable for younger children, may contain: Suggestive Dialog, Foul Language, Sex and Violence Scenes. TV-14 Parents Strongly Cautioned Unsuitable for children under 14, may contain: Strong Dialog, Foul Language, Sex and Violence Scenes.
Channel Banks Setup Use the Channel Banks to customize the channel offerings to the end user The TV has four channel banks, where the administrator or installer can store groups of TV channels. Note: Channel banks set up requires an installer’s remote with “Source” or “Bank” keys. Planning The Channel Banks Generally, TV channels are grouped into “program packages” with terms that are proposed to the end user. The user then opts for a package. Below is an example of how TV channels may be grouped.
Channel Banks Setup Use the Channel Banks to customize the channels available to the end user Each channel bank is capable of storing up to 140 broadcast digital plus 125 analog channels Figure 1.
Channel Banks Setup Use the Channel Banks form below to plan your program packages Date _____________ Installer __________________________________ PLAN YOUR CHANNEL BANKS BY FILLING IN THESE CHARTS B Purpose A N K (or use photocopies) Channel Number 1 2 3 4 5 6 7 8 9 10 11 1 2 13 14 15 16 17 18 19 2 0 21 22 23 24 2 5 1 2 3 4 B A N K Purpose Chann el Number 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 1 2 3 4 B A N K Purpose Chann el Number 51 52 53 54 55 56 5
Installer Menu Use the Installer Menu to set up or change operational settings. See detailed descriptions of the Installer Menu items on the following pages Installer menu items can be accessed by using the optional installer’s remote control. Just press and hold MENU (about 8 seconds) until the menu disappears, then press 9, 8, 7, 6, then OK (Enter). To remove the Installer’s Menu, press OK repeatedly. Any changes you make will be stored in nonvolatile memory. The Installer menu opens with the main menu.
Installer Menu Installer Menu Items 24-I through 61-I Menu Function Item Value Range Default Value Brief Description of Function and Comments 24-I. TEXT MODE 0/1 1 Set to 1 to add Text option to closed caption menu. 27-I. HOSPITAL MODE 0-2 2 Leave default set to 2. 28-I. CH OVER RIDE 0/1 1 When set to 0, limits direct access to only channels in memory and locks out Auto Program function. 29-I. OLD OCV 0/1 0 OCV should set to 1. 30-I. ACK MASK 0/1 0 M.P.I. communication parameter.
Installer Menu Installer Menu Items 62-I through 88-I Menu Function Item Value Range Default Value Brief Description of Function and Comments 62-I. BCK VIDEO M 0-7 7 Custom background color for the Video menu. 63-I. EN PTL COL 0/1 0 Set to 1 to enable custom color for the V-Chip (Parental Control) menu. 64-I. FOR PTL M 0-7 6 Custom foreground color for the V-Chip (Parental Control) menu. 65-I. BCK PTL M 0-7 4 Custom background color for the V-Chip (Parental Control) menu. 69-I.
Installer Menu Installer Menu Items 89-I through 117-I Menu Function Item Value Range Default Value Brief Description of Function and Comments 89-I. POKE ENABLE 0/1 0 If set to 1, writing to Non - volatile memory through *M.P.I. is enabled. 90-I. KEY LOCK 0/1 0 If set to 1, front keyboard functionality is disabled. 0 - 255 0 Selects Minor start channel. Set 0 for NTSC. Not 0, sets Minor channel number. 0/1 0 To retain set aspect ratio on power cycle, set to 1.
Installer Menu Detailed Descriptions for Installer Menu Items 2-I through 9-I 2-I. AC ON (AC Power Switchable) Allows the TV to turn ON just by applying AC power. Pressing the POWER button is not necessary. This is desirable if the TV is plugged into a cable box or a power outlet controlled by a wall switch. Use Left or Right ADJ to select 0 or 1, where 0 is the default is OFF, and 1 is ON.
Installer Menu Detailed Descriptions for Installer Menu Items 10-I through 25-I Change values with ADJ (Adjust) Left/Right keys. It may be best to set the same value on every TV. Note: The maximum volume level cannot have a value setting lower than the MIN VOLUME level (See Item 8 -I). 10-I. MUTE DISABLE Enables or disables sound mute function. If set to 1, sound cannot be muted. If set to 0, sound can be muted. 11-I. NOT USED 12-I.
Installer Menu Detailed Descriptions for Installer Menu Items 26-I through 53-I 26-I. NOT USED 35-I. NOT USED 27-I. HOSPITAL MODE The default is 2 (which favors most hospitals). With this setting two things are affected: Channel Banks 1, 2 and 3 are accessible, while Bank 4 can be made inactive by removing all the channels from Channel Bank 4. Then, if Channel Bank 4 is selected when the TV is turned on, the TV screen will show “Inactive TV”.
Installer Menu Detailed Descriptions for Installer Menu Items 54-I through 70-I Notes: For Items 55-I to 71-I. Foreground Color 0 (Black), will only show highlighted option in black on menu, regardless of the background color chosen. Other Setup menu options will be blue. If Foreground and Background numbers are 0, background color will be transparent and all menu text will be Blue. 54-I. EN SET COL (Enable Setup Menu Color) Set to 1 to enable custom color settings for the Setup menu.
Installer Menu Detailed Descriptions for Installer Menu Items 71-I through 90-I 71-I. BCK CH-T COL (Channel-Time Display Background Color) See Notes on page 48. 0 = Black 3 = Yellow 6 = Cyan 80-I. UPN MSB-2 User programmable number, most significant byte-2 readable by M.P.I. command. 1 = Red 81-I. UPN LSB User programmable number, least significant byte readable by M.P.I. command.
Installer Menu Detailed Descriptions for Installer Menu Items 91-I through 117-I 91-I. NOT USED 105-I. NOT USED 92-I. NOT USED 106-I. A RATIO LOCK (Aspect Ratio Lock) If set to 1, current picture aspect ratio is retained at power off. At power on, previous aspect ratio will be used. If set to 0, resets aspect ratio to default setting at TV turn on. 93-I. NOT USED 94-I. NOT USED 95-I. NOT USED 96-I. NOT USED 97-I. NOT USED 98-I. NOT USED 99-I. NOT USED 100-I. NOT USED 101-I. NOT USED 102-I. NOT USED.
LT2000/LT2002 QuickSet Clone Programmer Use the QuickSet II “Clone” Programmer to copy the setup from a “master” TV then quickly transfer the setup to duplicate TV's; must be the same model number as the master TV. THE CLONE HAS CONTROL OF THE TV THE CLONE IS VERSION THE TV IS VERSION THE SW IS REVISION CLONE CLOCK TV CLOCK XX XX XX = XX:XX = XX:XX -PRESS ANY KEY TO CONTINUE. -DISCONNECT CLONE WHEN DONE.
LT2000/LT2002 QuickSet Programmer Cloning Preparations Before You Begin Cloning... • Only use one MPI port for connecting to MPI equipment. • Do not run Auto Program while TV is connected to clone programmer. • The “master TV” should be connected to a good, stable signal from an overthe-air antenna or cable service and turned on. • Teaching and Learning is only possible between identical model Zenith TV's. (However, the Clone programmer can store 3 different master TV setups.
LT2000/LT2002 QuickSet Programmer Cloning CLONE SELECTION MENU THE CLONE HAS CONTROL OF THE TV THE CLONE IS VERSION THE TV IS VERSION THE SW IS REVISION CLONE CLOCK TV CLOCK XX XX XX = XX:XX = XX:XX -PRESS ANY KEY TO CONTINUE. -DISCONNECT CLONE WHEN DONE. C. Learn Setup from Master TV Press 1 to select the “Learn From TV” option, then press ON/OFF, POWER, or ENTER to go to the Memory Bank Selection Menu.
LT2000/LT2002 Clone Programmer Clone Operation Notes Disconnect the Clone from the TV when you are finished; automatically switching it off. The realtime clock continues to run after the main circuits are switched off. Reset Clone After Static Shock After replacing exhausted batteries, or if the programmer behaves strangely after a static shock, use a paper clip or similar instrument inserted through the small hole marked ”RESET” to activate the internal reset switch and restore normal operation.
Troubleshooting Some Quick and Easy Tips for Resolving Problems Installer Menu Settings and TV Problems Installer menu item settings dictate how the TV functions. If a feature is not available or a problem can not be solved, check the installer menu settings to assure feature and functional items are set to appropriate levels, etc. Symptom(s) Possible Cause(s) Possible Solution(s) Page(s) • AC Power Cord not connected or power outlet doesn’t work. Connect power cord. Try a different power outlet.
Troubleshooting Some Quick and Easy Tips for Resolving Problems Symptoms Possible Cause(s) Possible Solution(s) • Channel Blanked. Set channel to ‘Add’ in Add/Del/Blnk menu. • TV station problems. Try a different channel. Page(s) Picture Reception Poor or no picture. 21 16/17 • Video menu not adjusted properly. Check Video menu option settings. Local interference. 32 • Check for disturbing source.
Troubleshooting Some Quick and Easy Tips for Resolving Problems Symptom(s) Possible Cause(s) Possible Solution(s) Page(s) • Parental Control needs to be reset. Press and hold down MENU key until menu disappears. 16 Key in 9-8-7-6 and press CC. (For this to work, Installer menu item 0-1 Installer Seq needs to be set to 0.) 41 Parental Control Problems Patient has left Parental Control active, password is not known. Protected/blocked • Program content is restricted. message shows on-screen.
Glossary A list of definitions for some of the words found in this guide 75 OHM RF CABLE The wire that comes from an off-air antenna or cable service provider. The end looks like a hex-shaped nut with a wire sticking through the middle. It screws onto the threaded jack on the back of the TV. 300 TO 75 OHM ADAPTER A small device that connects a two-wire 300 ohm antenna to a 75 ohm RF jack.
Notes This page is available for the Installer to make notes as they relate to this TV set up 206-4065 Page 59
Zenith HealthView TV Warranty HealthView Color TV Welcome to the LG family! We believe that you will be pleased with your new Zenith TV. Please read this warranty carefully, it is a “LIMITED WARRANTY” as defined under Federal Law. This warranty gives you specific legal rights, and you may also have other rights that vary from state-tostate within the U.S.A.