OWNER’S MANUAL DVD Receiver System Please read this manual carefully before operating your set and retain it for future reference. FOR THE WARRANTY TERMS & CONDITIONS, PLEASE REFER TO BACK COVER OF THIS MANUAL. MODEL HT44S (HT44S, SH85S-F/ W) P/NO : MFL63284290 HT805S-D0_BGBRLL_ENG_4290.
1 Safety Information Safety Information 1 Safety Information CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USERSERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Safety Information 1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. 2. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. 3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health.
Safety Information This device is equipped with a portable battery or accumulator. 1 Safe way to remove the battery or the battery from the equipment: Safety Information Remove the old battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put in the appropriate container at designated collection points.
Safety Information HT805S-D0_BGBRLL_ENG_4290.indd 5 1 Safety Information POWER: This unit operates on a mains supply of 200-240V~, 50/60Hz. WIRING: This unit is supplied with a BSI 1363 approved 13 amp mains plug, fused at 5 amp. When replacing the fuse always use a 5 amp BS 1362, BSI or ASTA approved type. Never use this plug with the fuse cover omitted. To obtain a replacement fuse cover contact your dealer.
Contents Contents 20 AUX IN Connection 20 AUDIO (PORT.
Contents 31 Changing subtitle code page 42 Trademarks and Licenses 32 Viewing a PHOTO file 43 Specifications 32 Options while viewing a photo 33 Sleep Timer Setting 33 Dimmer 33 Turn off the sound temporarily 33 Last Scene Memory 33 System Select - Optional 33 Adjust the speaker level Warranty 44 1 Warranty 2 settings 34 34 Radio Operations Presetting the Radio Stations 34 Deleting all the saved stations 34 Deleting a saved station 34 Improving poor FM reception 35 See
Preparation 2 Preparation 2 Preparation Unique Features Accessories Portable In Please check and identify the supplied accessories. Listens to music from your portable device. (MP3, Notebook, etc) USB Direct Recording Records music from CD to your USB device. Remote control (1) Battery (1) FM antenna (1) Speaker cables (3) Full HD up-scaling Views Full HD picture quality with simple setup. Home Theater Speaker ez Setup listens sound form TV, DVD and Digital device with vivid 2.1 or 2.
Preparation Playable Discs This unit plays DVD±R/RW and CD-R/RW that contains audio titles, DivX, MP3, WMA and/or JPEG files. Some DVD±RW/DVD±R or CDRW/CD-R cannot be played on this unit due to the recording quality or physical condition of the disc, or the characteristics of the recording device and authoring software. DVD-VIDEO (8 cm / 12 cm disc) Discs such as movies that can be purchased or rented.
Preparation Playable file Requirement DivX file compatibility with this unit is limited as follows : • Available resolution: within 720x576 (W x H) pixels. • The file name of the DivX subtitle should be entered within 45 characters. • If there is impossible code to express in the DivX file, it may be displayed as " _ " mark on the display. • Frame rate : less than 30 fps. • If the video and audio structure of recorded files is not interleaved, either video or audio is outputted.
Preparation Remote control Remote control 11 1 POWER : Switches the unit ON or OFF. Z OPEN/CLOSE : Opens and closes the disc Drawer. SLEEP : Sets the System to turn off automatically at a specified time. (Dimmer : The display window will be darken by half.) INFO/DISPLAY : Accesses On-Screen Display. HOME: Displays the [Home] menu. DISC MENU : Accesses the menu on a DVD disc.
Preparation Remote control a • • • • • • • • • • e • • • • • • • • • 0-9 numerical buttons : Selects numbered options in a menu. CLEAR : Removes a number when setting the password. s REPEAT : Selects a play mode. (Repeat/ Random) • • • • • • • • • • f • • • • • • • • • 2 Preparation b TV Control buttons : Controls the TV. (LG TV only) z REC : USB Direct Recording. : This button is not available. c RDS : Radio Data System.
Preparation 13 Front panel b c d 2 Preparation a k j ih g f e a 1/\ (POWER) Switches the unit ON or OFF. g x (STOP) Stops playback. b Disc Tray h N/X (PLAY / PAUSE) Starts playback. Pause playback temporarily, press again to exit pause mode. c Display window Shows the current status of the unit. d VOLUME Adjusts speaker volume. e F (FUNCTION) Changes the input source or function. f ./> (SKIP) Go to next or previous file/track/chapter.
Preparation Rear panel a b c d e f 2 Preparation jih a Power cord b Speakers connectors Connect the speaker cables. c Cooling Fan d Antenna Connector FM- Connects the FM wired antenna e SCART connetcor f VIDEO OUT Connects to a TV with video inputs. HT805S-D0_BGBRLL_ENG_4290.indd 14 g g HDMI OUT (type A) Connects to TV with HDMI inputs. (Interface for digital audio and video) h OPTICAL IN Connects to optical audio equipment.
Installation 15 3 Installation 1. Connect the wires to the unit. Match each wire’s colored band to the same colored connection terminal on the rear of the unit. To connect the cable to the unit, press each plastic finger pad to open the connection terminal. Insert the wire and release the finger pad.
Installation Connections to Your TV Component Video Connection Make one of the following connections, depending on the capabilities of your existing equipment. You can hear the sound through the system’s speakers. Connect the COMPONENT VIDEO OUTPUT (PROGRESSIVE SCAN) jacks on the unit to the corresponding input jacks on the TV using component cables.
Installation HDMI Out Connection If you have a HDMI TV or monitor, you can connect it to this unit using a HDMI cable. Connect the HDMI OUT jack on the unit to the HDMI IN jack on a HDMI compatible TV or monitor. Set the TV’s source to HDMI (refer to TV’s Owner’s manual). HDMI Connection 17 NOTE • If a connected HDMI device does not accept the audio output of the unit, the HDMI device ’s audio sound may be distorted or may not output.
Installation Video Connection SCART Connection Connect the VIDEO OUT jack on the unit to the video in jack on the TV using a video cable. Connect the SCART jack on the unit to the SCART in jack on the TV using a SCART cable. You can hear the sound through the system’s speakers. You can hear the sound through the system’s speakers. Video Connection SCART Connection Unit Unit 3 Installation TV TV Yellow HT805S-D0_BGBRLL_ENG_4290.
Installation Resolution Setting The unit provides several output resolutions for HDMI OUT and COMPONENT VIDEO OUT jacks. You can change the resolution using [Setup] menu. 1. Press HOME. 2. Use I/i to select the [Setup] and press ENTER. The [Setup] menu appears. 19 Video Output Resolution Displayed resolution in display window and outputted resolution may different according to connection type.
Installation Optional Equipment Connection AUDIO (PORT. IN) In Connection Connect an output of portable device (MP3 or PMP etc) to the AUDIO (PORT. IN) input connector. PORT.IN Connection AUX IN Connection Connect an Output of auxiliary device to the AUX (L/R) INPUT Connector. AUX IN Connection 3 Installation Unit MP3 player, etc... Listening to music from your portable player or external device The unit can be used to play the music from many types of portable player or external devices.
Installation USB Connection Connect the USB port of USB Memory (or MP3 player, etc.) to the USB port on the front of the unit. 21 Compatible USB Devices • MP3 Player : Flash type MP3 player. • USB Flash Drive : Devices that support USB2.0 or USB1.1. • The USB function of this unit does not support some USB devices. USB Connection USB device requirement Devices which require additional program installation connected to a computer, are not supported.
Installation OPTICAL IN connection Antenna Connection Connect an optical output of Unit (or Digital Device etc) to the OPTICAL IN connector. OPTICAL IN Connection Connect the supplied FM antenna for listening to the radio. Connect the FM Wire antenna to the FM antenna connector. Antenna Connection 3 Installation To the digital optical output jack of your component Home theater speaker ez setup Listen to sound from TV, DVD and Digital Device with 2.1 or 2 ch mode.
Installation By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 23 to 27. OSD Initial language settings During the first use of this unit, the initial language setup menu appears on your TV screen. You must complete initial language selection before using the unit. English will be selected as the initial language. 1.
Installation Language Menu Language Select a language for the Setup menu and then on screen display. Disc Audio / Disc Subtitle / Disc Menu Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu. 3 [Original] Refers to the original language in which the disc was recorded. Installation [Other] To select another language, press numeric buttons and then ENTER to enter the corresponding 4-digit number according to the language code list on the page 40.
Installation [720p] Outputs 720 lines of progressive video. [480p (or 576p)] Outputs 480 (or 576) lines of progressive video. [480i (or 576i)] Outputs 480 (or (576) lines of interlaced video. Audio 2.1 Speaker setup Make the following settings for the built-in 2.1 channel surround decoder. 1. Select [2.1 Speaker setup] on the [Audio] menu. 2. Press ENTER. The [2.1 Speaker setup] appears. [Speaker selection] Select a speaker that you want to adjust.
Installation DRC (Dynamic Range Control) Make the sound clear when the volume is turned down (Dolby Digital only). Set to [On] for this effect. Vocal Select [On] to mix karaoke channels into normal stereo. This function is effective for multi-channel karaoke DVDs only. HD AV Sync 3 Installation Sometimes Digital TV encounters a delay between picture and sound.
Installation You can enter or change password. 1. Select [Password] on the [Lock] menu and then press i. 2. Press ENTER. 3. Input a password and press ENTER. To change the password, press ENTER when the [Change] option is highlighted. Input a password and press ENTER. Enter it again and press ENTER to verify. 4. Press HOME to exit the menu. NOTE If you forget your password, you can clear it using the following steps: 1. Select the [Setup] menu on the [Home] menu.
Operation 4 Operation Using the Home Menu Basic Operations 1. Press HOME. Displays the [Home] menu. 1. Insert the disc by using the Z OPEN/ CLOSE or Connect the USB device to the USB port. 2. Press HOME. Displays the [Home] Menu. 4 Operation 2. Select an option by using I i. 3. Press ENTER then selected option menu. [Music] – Displays [MUSIC] menu. 3. Select an option by using I i. If you select the [Movie], [Photo] or [Music] option when you connect up to two devices, it appears as belows.
Operation To Press x (STOP) Playback Press B (PLAY), MONO/ STEREO. Pause Press X (PAUSE/STEP). Frameby-Frame playback Press X (PAUSE/STEP) repeatedly to play title Frame-by-Frame. (DVD, DivX only) During playback, press ./> SKIP to go to Skipping to the next chapter/ track/ the next/ file or to return to the previous beginning of the current chapter/ track/ chapter/ track/ file. file Press . SKIP twice briefly to step back to the previous chapter/ track/ file.
Operation To display the DVD Menu DVD When you play a DVD which contains several menu, you can select the menu you want using the Menu. 1. Press DISC MENU. The disc’s menu appears. 2. Press U u to select the time clock icon and “--:--:--” appears. 3. Press B (PLAY), MONO/STEREO to confirm. DVD When you play a DVD which contains several title, you can select the title you want using the Menu. 4 1. Press TITLE. The disc’s title appears. Operation 2. Select the menu by pressing U u I i. 3.
Operation ACD MP3 NOTE WMA The mark function enables you to store your favourite files from any disc or USB device in the unit memory. 1. Select [Music] on the [Home] menu. Music menu Returning to the upper folder. (MP3/ WMA only) File information will be displayed according to the ID3TAG information on the appropriate music file. (MP3 only) If you want to select all files on the list, select [Select All] and press ENTER. To delete a Marker 1.
Operation Viewing a PHOTO file JPG About help menu in the full screen. This unit can play discs with photo files. Menu 1. Select [Photo] on the [Home] menu and press ENTER. Menu Photo menu Moving to the previous or next file list. Buttons INFO/ DISPLAY Operation Displaying the Option menu. b/B Prev./ Next I/i Moving to another file O Close O RETURN Returning to the [Photo] menu. Options while viewing a photo You can use various options during viewing a photo in full screen. 4 1.
Operation Sleep Timer Setting System Select - Optional Press SLEEP one or more times to select delay time between 10 and 180 minutes, after the unit will turn off. You must select the appropriate system mode for your TV system. Press and hold X (PAUSE/ STEP) for more than five seconds to be able to select a system in the [Home] menu. (PAL/ NTSC) To check the remaining time, press SLEEP.
Operation Radio Operations Presetting the Radio Stations You can preset 50 stations for FM. Be sure that both FM aerials are connected. (Refer to the page 22) Listening to the radio 1. Press t RADIO&INPUT until FM appears in the display window. The last received station is tuned in. 4 Before tuning, make sure that you have turned down the volume. 1. Press t RADIO&INPUT until FM appears in the display window. 2. Select the desired frequency by using TUNING (-/+) 3.
Operation 35 Seeing information about a radio station The FM tuner is supplied with the RDS (Radio Data System) facility. This shows information about the radio station being listened to. Press RDS repeatedly to cycle through the various data types. : PS (Programme Service Name) The name of the channel will appear in the display PTY (Programme Type Recognition) The programme type (e.g. Jazz or News) will appear in the display.
Operation Sound adjustment On Display Description MP3 OPT This function is optimized for compressible MP3, WMA file. It improves the treble sound. Setting the surround mode This system has a number of pre-set surround sound fields. You can select a desired sound mode by using SOUND EFFECT. You can change the SOUND EFFECT using I i arrow key while the sound effect information is displayed on. The displayed items for the equalizer maybe different depending on sound sources and effects.
Operation Recording to USB You can record music or sound souce to USB device by connecting in to the port on the unit. 1. Connect the USB device to the unit. 2. Select a mode in which you want to record. Play back a sound source first. 3. Start the recording by pressing z REC. 4. To stop recording, press x (STOP). [All tracks/ files recording] Record to USB in stop or play mode. [Program list recording] After marking desired file(s) and you can record it to USB (Refer to the page 31).
Maintenance 5 Maintenance Notes on Discs Handling the Unit Handling Discs When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Never stick paper or tape on the disc. Keeping the exterior surfaces clean • Do not use volatile liquids such as insecticide spray near the unit. • Wiping with strong pressure may damage the surface.
Troubleshooting 39 6 Troubleshooting PROBLEM CAUSE CORRECTION Plug the power cord into the wall outlet No power The power cord is disconnected. securely. Select the appropriate video input mode The TV is not set to receive the DVD signal. on the TV so the picture from the unit appears on the TV screen. No picture The video cables are not connected Connect the video cables securely to both securely. the TV and unit.
Appendix 7 Appendix Language Codes Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Appendix 41 Area Codes Area Afghanistan Argentina Australia Austria Belgium Bhutan Bolivia Brazil Cambodia Canada Chile China Colombia Congo Costa Rica Croatia Czech Republic Denmark Ecuador Egypt El Salvador Ethiopia Fiji Finland France Germany Great Britain Greece Code AF AR AU AT BE BT BO BR KH CA CL CN CO CG CR HR CZ DK EC EG SV ET FJ FI FR DE GB GR Area Greenland Hong Kong Hungary India Indonesia Israel Italy Jamaica Japan Kenya Kuwait Libya Luxembourg Malaysia Maldives Mexico Monaco Mongolia Moro
Appendix Trademarks and Licenses Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. What is SIMPLINK? Some functions of this unit are controlled by TV’s remote control when this unit and LG TV with SIMPLINK are connected through HDMI connection. Controllable functions by LG TV’s remote control; Play, Pause, Scan, Skip, Stop, Power Off, etc. • Refer to the TV owner’s manual for the details of SIMPLINK function.
Appendix Specifications Amplifier • Stereo mode: 135 W + 135 W (4 Ω at 1 KHz) • Subwoofer General • Power requirements: 200 - 240 V, 50/60 Hz • Power consumption: 55 W • Dimensions (W x H x D): 360 x 62.5 x 312.3 mm without foot • Net Weight (Approx.): 2.8 kg • Operating temperature: 41 °F to 95 °F (5 °C to 35 °C) • Operating humidity: 5 % to 90 % • Bus Power supply (USB): DC 5 V 500 mA 43 170 W (3 Ω at 60 Hz) Speakers • Front speaker Type: Impedance : Rated Input Power: Max.
Warranty Technology with the human touch GUARANTEE • LG Electronics U.K. Ltd. will provide the following services in order toexpedite this Guarantee. 1. A ll faulty components which fail due to defective manufacture will be replaced free of charge for a period of 12 months from the original date of purchase. 2.
HT805S-D0_BGBRLL_ENG_4290.
