ENGLISH DEUTSCH FRANÇAIS NEDERLANDS SLOVENŠČINA PORTUGUÊS HT906TA (HT906TA, SH96TA-S/ W, SH96SB-C) ΕΛΛΗΝΙΚΑ Please read this manual carefully before operating your set and retain it for future reference. ESPAÑOL DVD Home Cinema System ITALIANO OWNER’S MANUAL P/NO : MFL67204903 HT906TA-RH_BDEULL_ENG_4903.
Getting Started Safety Information 1 CAUTION Getting Started RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Getting Started This device is equipped with a portable battery or accumulator. CAUTION: The apparatus shall not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, shall be placed on the apparatus. Copyrights It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyrighted material without permission. This product features the copy protection function developed by Macrovision.
Table of Contents Table of Contents 1 Getting Started 2 6 6 6 6 6 6 6 7 7 7 7 7 8 9 10 11 Safety Information Unique Features – Portable In – USB Direct Recording – Full HD up-scaling – Home Theater Speaker ez Setup – Made for iPod Accessories Introduction – Playable Discs – About the “&” Symbol Display – Symbols Used in this Manual – Regional Codes Playable file Requirement Remote control Front panel Rear panel 2 Connecting 12 14 15 16 16 17 18 18 Assembling the speaker Attaching the speakers to
Table of Contents 39 39 – Enjoying iPod on the screen – Enjoying the iPod IN mode 5 Troubleshooting 41 Troubleshooting 6 Appendix 42 42 42 43 44 45 46 Maintenance – Handling the Unit – Notes on Discs Area Code List Language code List Trademarks and Licenses Specifications 5 1 2 3 4 5 6 HT906TA-RH_BDEULL_ENG_4903.
Getting Started Unique Features 1 Portable In Accessories Please check and identify the supplied accessories. Getting Started Listen to music from your portable device. (MP3, Notebook, etc) USB Direct Recording Records music from CD to your USB device. Remote control (1) Battery (1) FM antenna (1) Speaker cables (6) Full HD up-scaling Views Full HD picture quality with simple setup. Home Theater Speaker ez Setup Listen to sounds from TV, DVD and Digital device with vivid 5.1 (2.1 or 2.
Getting Started Introduction Playable Discs DVD-VIDEO (8 cm / 12 cm disc) Discs such as movies that can be purchased or rented. DVD±R (8 cm / 12 cm disc) Video mode and finalized only. DVD-RW (8 cm / 12 cm disc) Video mode and finalized only. DVD+R: Video mode only Supports the double layer disc also. DVD+RW (8 cm / 12 cm disc) Video mode and finalized only. Audio CD: Music CDs or CD-R/CDRW in music CD format that can be purchased.
Getting Started Playable file Requirement 1 Getting Started MP3/ WMA music file requirement MP3/ WMA file compatibility with this unit is limited as follows : yy Sampling frequency : within 32 to 48 kHz (MP3), within 32 to 48 kHz (WMA) yy Bit rate : within 32 to 320 kbps (MP3), 40 to 192 kbps (WMA) yy Support Version : v2, v7, v8, v9 yy Maximum files : Under 999 yy File extensions : “.mp3”/ “.
Getting Started 9 Remote control m INFO/DISPLAY: Accesses OnScreen Display. n HOME: Displays the [Home Menu]. DISC MENU: Accesses the menu on a DVD disc. • • • • • • b • • • • • • W/S/A/D (up/ down/ left/ right): Used to navigate on-screen displays. PRESET +/-: Selects programme of Radio. Remove the battery cover on the rear of the Remote Control, and insert one (size AAA) battery with 4 and 5 matched correctly. SPEAKER LEVEL: Sets the sound level of desired speaker.
Getting Started Front panel 1 Getting Started a b c l k d jih g f e a 1/! (POWER) Switches the unit ON or OFF. h Z (STOP) Stops playback. b Disc Tray i z/M (PLAY/PAUSE) Starts playback. Pauses playback temporarily, press again to exit pause mode. c iPod Dock d Display window Shows the current status of the unit. e VOLUME Adjusts speaker volume. f F (FUNCTION) Changes the input source or function. g C/V (SKIP) Go to next or previous file/track/chapter.
Getting Started 11 Rear panel 1 b c de ji a Power cord b Speakers connectors Connects the speaker cables. c Cooling Fan d Antenna Connector FM- Connects the FM wired antenna. e VIDEO OUT Connects to a TV with video inputs. Getting Started a h g f f HDMI OUT Connects to TV with HDMI inputs. (Interface for digital audio and video) g HDMI IN 1/2 Connect to an external source with HDMI output. h OPTICAL IN Connects to optical audio equipment.
Connecting Assembling the speaker 2. Insert a speaker wire from the bottom of the base. Before connecting the speakers, assemble the speakers. Please check the items for assembling the speakers. 2 Preparation Connecting Pole 3. Attach the speakers to the speaker stands by rotating the screws. Base Screw Speaker Cable 1. Attach the pole to the base, then secure the connection with a supplied screw. HT906TA-RH_BDEULL_ENG_4903.
Connecting 4. Connect the speaker wire to the terminal on the speaker. Make sure the wire marked black goes in to the terminal marked “–” (minus) and the other wire goes in to the terminal marked “+” (plus). 13 >>Caution Be careful that the speaker does not fall down. Otherwise it may result in the speaker malfunctioning and causing personal injury and/ or property damage. 2 Connecting HT906TA-RH_BDEULL_ENG_4903.
Connecting Attaching the speakers to the unit 2 Connecting 1. Connect the wires to the unit. Match each wire’s colored band to the same colored connection terminal on the rear of the unit. To connect the cable to the unit, press each plastic finger pad to open the connection terminal. Insert the wire and release the finger pad.
Connecting Positioning the system The following illustration shows an example of positioning the system. Note that the illustrations in these instructions differ from the actual unit for explanation purposes. For the best possible surround sound, all the speakers other than the subwoofer should be placed at the same distance from the listening B G A A A D Surround left speaker (L)/ Surround right speaker (R): Place these speakers behind your listening position, facing slightly inwards.
Connecting Connections to Your TV Make one of the following connections, depending on the capabilities of your existing equipment. ,,Note 2 Component Video Connection Connect the COMPONENT VIDEO OUTPUT (PROGRESSIVE SCAN) jacks on the unit to the corresponding input jacks on the TV using component cables. You can hear the sound through the system’s speakers. Connecting yy Depending on your TV and other equipment you wish to connect, there are various ways you could connect the player.
Connecting 17 ,,Note HDMI Out Connection If you have a HDMI TV or monitor, you can connect it to this unit using a HDMI cable (Type A, High Speed HDMI™ Cable). Connect the HDMI OUT jack on the unit to the HDMI IN jack on a HDMI compatible TV or monitor. Set the TV’s source to HDMI (refer to TV’s Owner’s manual). yy When you connect a HDMI or DVI compatible device make sure of the following: - Try switching off the HDMI/DVI device and this unit.
Connecting Video Connection Connect the VIDEO OUT jack on the unit to the video in jack on the TV using a video cable. You can hear the sound through the system’s speakers. 2 To connect to a TV with the SCART jack Connect the RCA to SCART cable form the VIDEO OUT on the rear of the unit to the SCART jack on your TV. Unit Connecting Unit TV TV Yellow HT906TA-RH_BDEULL_ENG_4903.
Connecting Resolution Setting The unit provides several output resolutions for HDMI OUT and COMPONENT VIDEO OUT jacks. You can change the resolution using [Setup] menu. 1. Press n HOME. 2. Use A/D to select the [Setup] and press b ENTER. The [Setup] menu appears. 19 Video Output Resolution Displayed resolution in display window and outputted resolution may different according to connection type.
Connecting Optional Equipment Connection HDMI IN connection You can enjoy the pictures and sound of your component with this connection. 2 Connecting Connect the HDMI IN 1 or HDMI IN 2 jack on the unit to the HDMI output jack on your Set-Top box (or Digital Device etc.) using an HDMI cable. Set the external source to HDMI IN 1 or HDMI IN 2 by pressing P RADIO&INPUT. ,,Note yy You cannot change the video resolution at the HDMI IN 1 or HDMI IN 2 mode.
Connecting AUX In Connection Connect an Output of auxiliary device to the AUX (L/R) INPUT Connector. 21 AUDIO (PORT. IN) In Connection Connect an output of portable device (MP3 or PMP etc) to the AUDIO (PORT. IN) input connector. Unit 2 Listening to music from your portable player or external device To the audio output jacks of your component (TV, VCR, etc.) Red White ,,Note Connecting MP3 player, etc...
Connecting USB Connection Compatible USB Devices Connect the USB port of USB Memory (or MP3 player, etc.) to the USB port on the front of the unit. yy MP3 Player : Flash type MP3 player. evices that support USB2.0 or yy USB Flash Drive : D USB1.1. yy The USB function of this unit does not support some USB devices. USB device requirement 2 Connecting yy Devices which require additional program installation connected to a computer, are not supported.
Connecting 23 OPTICAL In connection Connect an optical output of Unit (or Digital Device etc) to the OPTICAL IN connector. Antenna Connection Connect the supplied FM antenna for listening to the radio. Connect the FM Wire antenna to the FM antenna connector. 2 Connecting To the digital optical output jack of your component Home theater speaker ez setup Listen to sound from TV, DVD and Digital Device with 5.1(2.1 or 2)ch mode.
System Setting Adjust the setup settings By using the Setup menu, you can make various adjustments to items such as picture and sound. To display and exit the Setup menu 1. Press n HOME. Displays the [Home Menu]. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 24 to 28.
System Setting 25 Language Menu Language Select a language for the Setup menu and then on screen display. Disc Audio / Disc Subtitle / Disc Menu Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu. [Original] Refers to the original language in which the disc was recorded. To select another language, press numeric buttons and then b ENTER to enter the corresponding 4-digit number according to the language code list on the page 44.
System Setting Audio 5.1 Speaker Setup Make the following settings for the built-in 5.1 channel surround decoder. [Speaker] Select a speaker that you want to adjust. ,,Note Certain speaker settings are prohibited by the Dolby Digital licensing agreement. 1. Select [5.1 Speaker Setup] on the [Audio] menu. 2. Press b ENTER. The [5.1 SPEAKER] appears. [Size] Since the speaker settings are fixed, you cannot change the settings. [Volume] Press AD to adjust the output level of the selected speaker.
System Setting 27 DRC (Dynamic Range Control) Lock (Parental Control) Make the sound clear when the volume is turned down (Dolby Digital only). Set to [On] for this effect. Initial Setting the Area Code: Vocal When you use this unit for the first time, you have to set the Area Code. Select [On] to mix karaoke channels into normal stereo. 1. Select the [Lock] menu and then press D. This function is effective for multi-channel karaoke DVDs only. HD AV Sync 3.
System Setting Password Others You can enter or change password. 1. Select [Password] on the [Lock] menu and then press D. 2. Press b ENTER. 3. Input a password and press b ENTER. To change the password, press b ENTER when the [Change] option is highlighted. Input a password and press b ENTER. Enter it again and press b ENTER to verify. 4. Press n HOME to exit the menu. ,,Note 3 If you forget your password, you can clear it using the following steps: System Setting 1.
Operating 29 Using the Home Menu Basic Operations 1. Press n HOME. Displays the [Home Menu]. 1. Insert the disc by using the B OPEN/CLOSE or Connect the USB device to the USB port. 2. Press n HOME. Displays the [Home Menu]. 2. Select an option by using AD. 3. Press b ENTER then selected option menu. 3. Select an option by using AD. If you select the [Movie], [Photo] or [Music] option when you connect up to two devices, it appears as belows. Select a media then press b ENTER.
Operating To Stop Do this Press Z STOP. Playback Press d PLAY, MONO/ STEREO. Pause Press M PAUSE/STEP. Press M PAUSE/STEP Frame-byrepeatedly to play title FrameFrame playback by-Frame. (DVD, DivX only) During playback, press C/ V SKIP to go to the next Skipping to the chapter/ track/ file or to next/ previous return to the beginning of the chapter/ track/ current chapter/ track/ file. file Press C SKIP twice briefly to step back to the previous chapter/ track/ file.
Operating To display the DVD Menu r When you play a DVD which contains several menu, you can select the menu you want using the Menu. 1. Press DISC MENU. The disc’s menu appears. 2. Select the menu by using WSAD. 3. Press d PLAY, MONO/STEREO to confirm. To display the DVD title r When you play a DVD which contains several title, you can select the title you want using the Menu. 1. Press TITLE. The disc’s title appears. 2. Select the menu by pressing WSAD. 3. Press d PLAY, MONO/STEREO to confirm. r The 1.
Operating Marked Playback ut The mark function enables you to store your favourite files from any disc or USB device in the unit memory. 1. Select [Music] on the [Home Menu]. Returning to the upper folder. (MP3/ WMA only) File information will be displayed according to the ID3TAG information on the appropriate music file. (MP3 only) To delete a Marker 1. Use WS to select the track that you wish to erase from the marked file. 2. Press MARKER.
Operating 33 Viewing a PHOTO file About help menu in the full screen Menu Buttons Operation Menu m INFO/ DISPLAY Displaying the Option menu. a/d Prev./ Next A/D Moving to another file. i This unit can play discs with photo files. 1. Select [Photo] on the [Home Menu] and press b ENTER. Moving to the previous or next file list. x, x RETURN Close Returning to the [Photo] menu. Options while viewing a photo You can use various options during viewing a photo in full screen. 1.
Operating Sleep Timer Setting Press SLEEP one or more times to select delay time between 10 and 180 minutes, after the unit will turn off. To check the remaining time, press SLEEP. To cancel the sleep function, press SLEEP repeatedly until “SLEEP 10” appears, and then press SLEEP once again while “SLEEP 10” is displayed. ,,Note You can check the remaining time before the Unit turns off. Adjust the speaker level settings You can adjust the sound level of each speaker. 1.
Operating 35 Radio Operations Be sure that both FM aerials are connected. (Refer to the page 23.) Listening to the radio 1. Press P RADIO&INPUT until FM appears in the display window. The last received station is tuned in. 2. Press and hold TUNING (-/+) for about two seconds until the frequency indication starts to change, then release. Scanning stops when the unit tunes in a station. or Press TUNING (-/+) repeatedly. 3.
Operating Sound adjustment Setting the surround mode This system has a number of pre-set surround sound fields. You can select a desired sound mode by using SOUND EFFECT. You can change the SOUND EFFECT using AD arrow key while the sound effect information is displayed on. The displayed items for the equalizer maybe different depending on sound sources and effects. 4 Operating On Display Description NAT PLUS The NAT PLUS is Natural Plus sound effect.
Operating 37 Advanced Operations ,,Note Recording to USB yy You can check the recording percentage rate for the USB record on the screen during the recording. (Audio CD or MP3/ WMA CD only) You can record music or sound souce to USB device by connecting in to the port on the unit. yy During recording MP3/WMA, there is no sound. 1. Connect the USB device to the unit. yy When you stop recording during playback, the file that has been recorded at that time will be stored. (Audio CD only) 2.
Operating Playing the iPod yy Connect the iPod firmly. To open the iPod Dock, pull iPod dock. You can enjoy the media files with your iPod. For details about iPod, refer to the iPod’s User Guide. Preparation yy To view iPod’s Videos and Photos on the TV screen. -- Be sure to use the video connection through the VIDEO OUT jack on the rear panel of this unit. Select the appropriate video input mode on the TV.
Operating 39 Enjoying iPod on the screen Enjoying the iPod IN mode You can operate your iPod by controlling menu on the screen. You can operate your iPod by using the supplied remote control and controls on your iPod. 1. Connect the iPod firmly. 1. Connect the iPod firmly. 2. Press n HOME. 2. Press P RADIO&INPUT to select iPod IN mode. 3. Select [Music] or [Movie] using AD, and press b ENTER If you connected the other device (CD or USB), select the iPod on the menu and ENTER.
Operating ,,Note yy An error message “CHECK IPOD” or “Connected iPod model is not supported.” appears when: -- your iPod is not available for the function to be operated. yy An error message “CHECK IPOD” or “Please update iPod’s software.” appears when: -- your iPod has an old software version. > Update your iPod software to latest version. yy Depending on your iPod’s software version, it may not be possible to control your iPod from this unit. We recommend installing the latest software version.
Operating 41 Troubleshooting PROBLEM No power No picture CORRECTION Plug the power cord into the wall outlet securely. Select the appropriate video input mode on the TV so the picture from the unit appears on the TV screen. Connect the video cables securely to both the TV and unit. Select the correct input mode of the unit so you can hear the sound from the unit. There is little or no sound Connect the audio cables into the connection terminals correctly. Replace with a new audio cable.
Troubleshooting Maintenance Handling the Unit When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Keeping the exterior surfaces clean yy Do not use volatile liquids such as insecticide spray near the unit. yy Wiping with strong pressure may damage the surface. yy Do not leave rubber or plastic products in contact with the unit for a long period of time.
Appendix 43 Area Code List Choose an area code from this list.
Appendix Language code List Use this list to input your desired language for the following initial settings: [Disc Audio], [Disc Subtitle] and [Disc Menu].
Appendix 45 Trademarks and Licenses Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks & DTS Digital Surround and the DTS logos are trademarks of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Appendix Specifications General Power requirements 200 - 240 V, 50/60 Hz Power consumption 150 W Dimensions (W x H x D) 430 X 62.5 X 281 mm without foot Net Weight (Approx.) 4.0 kg Operating temperature 41 °F to 95 °F (5 °C to 35 °C) Operating humidity 5 % to 90 % Bus Power Supply (USB) DC 5 V 0 500 mA Inputs/ Outputs VIDEO OUT 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1 COMPONENT VIDEO OUT (Y) 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1 (Pb)/(Pr) 0.
Appendix 47 Front Speaker Type 2 Way 3 speaker Impedance Rated 4Ω Input Power 180 W Max. Input Power 360 W Net Dimensions (W x H x D) 280 X 1 152 X 225 mm Net Weight 3.33 kg Rear Speaker Type 2 Way 3 speaker Impedance Rated 4Ω Input Power 180 W Max. Input Power 360 W Net Dimensions (W x H x D) 280 X 1 152 X 225 mm Net Weight 3.33 kg Centre Speaker Type 2 Way 3 speaker Impedance Rated 4Ω Input Power 180 W Max.
HT906TA-RH_BDEULL_ENG_4903.
