OWNER’S MANUAL DLP PROJECTOR Please read this manual carefully before operating your set and retain it for future reference. HW300T P/NO : MFL66679803 (1110-REV04) www.lg.
LICENSES LICENSES Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. “Dolby “and the double-D symbol are trademarks of Dolby Laboratories. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. . This is an official DivX Certified® device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video.
SAFETY INSTRUCTIONS 3 SAFETY INSTRUCTIONS Please take note of the safety instructions to prevent any potential accident or misuse of the projector. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions.
SAFETY INSTRUCTIONS Do not place the projector directly on a carpet, rug or place where ventilation is restricted. - This would cause its internal temperature to increase and might create a fire hazard or damage the unit. Ensure good ventilation around the projector. The distance between the projector and the wall should be more than 30 cm. - An excessive increase in its internal temperature may cause a fire hazard or damage to the unit.
SAFETY INSTRUCTIONS NOTES Hold the plug firmly when unplugging. If you pull the cord, it may be damaged. - This may cause a fire hazard. Do not use if the power cord or the plug is damaged or any part of the power outlet is loose. - This may cause a fire or an electric shock hazard or damage to the unit. Ensure the power cord does not come into contact with sharp or hot objects. - This may cause a fire or an electric shock hazard or damage to the unit.
SAFETY INSTRUCTIONS CAUTION concerning the Power Cord It is recommend that most appliances be placed on a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner’s manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous.
SAFETY INSTRUCTIONS Cleaning WARNING Do not use water while cleaning the projector. - This may cause damage to the projector or an electric shock hazard. In the unlikely event of smoke or a strange smell from the projector, switch it off, unplug it from the wall outlet and contact your dealer or service center.
SAFETY INSTRUCTIONS FCC NOTICE ANTENNA Outdoor Antenna Grounding If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
SAFETY INSTRUCTIONS Disposal of your old appliance 1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. 2. All electrical and electronic products should be disposed of separately from the municipal waste stream through designated collection facilities appointed by your government or your local authorities. 3.
TABLE OF CONTENTS TABLE OF CONTENTS LICENSES 2 SAFETY INSTRUCTIONS 3 ASSEMBLING AND PREPARING 12 Unpacking 12 Optional Extras 13 Parts and Buttons 14 Installation 15 - Installation Precautions 15 - Basic Operation of the Projector 16 - How to Install the Projector Using a Tripod 17 - Kensington Security System 17 REMOTE CONTROL 18 WATCHING PROJECTOR 20 Connecting to an Antenna or Cable 20 - Connecting an Antenna or Basic Cable 20 - Connecting a Cable Box 20 Watching Projector 21 - Turning on f
TABLE OF CONTENTS MAKING CONNECTIONS 67 Connecting to a HD receiver, DVD, or VCR player 68 - HDMI Connection 68 - Component Connection 68 - Composite Connection 69 Connecting to a PC 69 - RGB Connection 69 Connecting to a Headphone 70 MAINTENANCE 71 Updating the Projector Firmware Cleaning the Projector - Cleaning the lens - Cleaning the Projector Case How to Fix the Lens Cap 71 72 72 72 73 SPECIFICATIONS 74 11
ASSEMBLING AND PREPARING ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.
ASSEMBLING AND PREPARING Optional Extras Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items.
ASSEMBLING AND PREPARING Parts and Buttons * The projector is manufactured using high-precision technology. You may, however, see on the Projector screen tiny black points and/or bright points (red, blue, or green). This can be a normal result of the manufacturing process and does not always indicate a malfunction.
ASSEMBLING AND PREPARING 15 Installation Installation Precautions Provide proper ventilation for this projector. - The projector is equipped with ventilation holes. Do not block or place anything near these holes. Internal heat build-up may occur, causing picture degradation or damage to the projector. - Do not place the projector on a carpet, rug or other similar surface. It may prevent a adequate ventilation of the projector bottom. This product should be mounted to a wall or ceiling only.
ASSEMBLING AND PREPARING Basic Operation of the Projector 1 Place the projector on a sturdy and horizontal surface. 2 Place the projector with the desired distance from the screen. The distance between the projector and the screen determines the actual size of the image. 3 Position the projector so that the lens is set at a right angle to the screen. If the projector is not set at a right angle, the screen image will be crooked.
ASSEMBLING AND PREPARING 17 How to Install the Projector Using a Tripod * You can install this projector using a camera tripod. * When stabilizing the tripod, we recommend using the locking bolt of standard size 4.5 mm or less.The maximum size allowed for the locking bolt is 5.5 mm.(If it is longer than the maximum allowed size, it may damage the projector.) Projector is connected to this part.
REMOTE CONTROL REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the projector correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED WITH AN INCORRECT TYPE.
REMOTE CONTROL 19 MENU Accesses the menu. NETCAST Select the desired NETCAST menu source. Q.MENU Accesses the quick menu. Navigation buttons (up/down/left/right) Scrolls through menus or options. OK Selects menus or options and confirms your input. BACK Returns to the previous level. AUTO Automatically adjusting of the PC input image. EXIT Clears all on-screen displays and returns to projector viewing. Control buttons Controls the NETCAST or MY MEDIA. BLANK Turns the projector screen on or off.
WATCHING PROJECTOR WATCHING PROJECTOR Connecting to an Antenna or Cable Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations may differ from the actual items and a RF cable is optional. Connecting a Cable Box Connect the projector to a cable box and the cable box to a wall antenna socket with 2 RF cables (75 Ω). Connecting an Antenna or Basic Cable Connect the projector to a wall antenna socket with an RF cable (75 Ω).
WATCHING PROJECTOR 21 Watching Projector Turning on for the First Time 1 Make sure the power cord is connected correctly. 2 After wait for a moment, press the POWER button on the remote control or control panel. (The light on the control panel will be turned on.) Check if the lens cap is removed before turning on the power. Watching Projector 1 In Standby mode, press the POWER to turn the projector on. 2 Press INPUT and select desired input.
WATCHING PROJECTOR Managing Channels Setting Up Channels Storing Channels To store channels automatically, 1 Press MENU to access the menu. 2 Press the Navigation buttons to scroll to CHANNEL and press OK. 3 Press the Navigation buttons to scroll to Auto Tuning and press OK. 4 Select Start to start automatic tuning. The projector scans and saves available channels automatically. 5 When you are finished, press EXIT. To store channels manually, 1 Press MENU to access the menu.
WATCHING PROJECTOR 23 Editing Your Channel List Favorite Channel Setup 1 Press MENU to access the menu. 2 Press the Navigation buttons to 1 3 Press the Navigation buttons to 2 Press FAV. to access the Favorite scroll to CHANNEL and press OK. scroll to Channel Edit and press OK. 4 Edit channels using the following buttons. Channel Edit Favorite Group : DTV 3-1 TV 5-1 A Press CH or Number buttons to access to select your desired channel. List.
WATCHING PROJECTOR Using Additional Options Adjusting Aspect Ratio - Set By Program: Displays images in the same aspect ratio as the original image. - 4:3: Resizes images to the previous standard. - Zoom: Enlarges an image to fit the screen width. The top and bottom of the image may not appear. Adjust proportion of Zoom, press or . Move the image on the screen, press or . - Cinema Zoom: Formats an image to the cinemascope ratio, 2.35:1.
WATCHING PROJECTOR Adding an Input Label Using Keystone Function Use this function when the screen is not at a right angle to the projector and the image is a trapezoid shape. Only use the Keystone function when you can’t get the best angle by moving the projector. •Keystone 0 ◀ Add a label to an input source so that you can easily identify a device connected to each input source. Input Label ꔉ OK 1 Press Key'sꔌ, Key'sꔍ to adjust the screen condition as you want. 2 When you are finished, press EXIT.
WATCHING PROJECTOR Blank Function Using Blank Function This function may be effective if you need to get the attention of the audience during presentations, meetings or briefings. 1 Press the BLANK to turn off the screen. You can choose the background color. (Refer to "Selecting Blank Image") 2 Press any button to cancel the blank function. To temporarily turn off the image on the screen, press BLANK.
ENTERTAINMENT 27 ENTERTAINMENT Network Connection Connecting to a Wireless Network The LG Wireless LAN for Broadband/DLNA Adaptor, allows the projector to connect to a wireless LAN network. The network configuration and connection method may vary depending on the equipment in use and the network environment. Refer to the setup instructions supplied with your access point or wireless router for detailed connection steps and network settings.
ENTERTAINMENT Setting to a Wireless Network 6 Press the Number buttons of the remote controller or select the proper buttons on the image to Input the security key of AP and press OK. To set up the network settings, 1 Press MENU to access the menu. 2 Press the Navigation buttons to scroll to NETWORK and press OK. 3 Press the Navigation buttons to select Network Setting and press OK.
ENTERTAINMENT 6 Select IP Auto Setting or IP Manual Setting. 7 - If selecting IP Manual Setting, press the Navigation and Number buttons. IP addresses will need to be input manually. - IP Auto Setting: Select this if there is a DHCP server (Router) on the local area network (LAN) via wired connection, the projector will automatically be allocated an IP address.
ENTERTAINMENT 5 Press the Navigation buttons to type in an IP address and press OK. - PC Setting: Internet Protocol(TCP/ IP) of PC needs to be set manually. IP address, Subnet Mask, and default Gateway can be set with your own discretion. e.g.) IP address: 192.168.0.1 / Subnet Mask: 255.255.255.0 / default Gateway: 192.168.0.10 - Projector Setting: Verify IP address and gateway of PC. Input Gateway address of PC to IP Address, and IP Address of PC to Gateway, and select Enter. e.g.) IP address: 192.
ENTERTAINMENT Some internet connection operations may not be possible due to certain restrictions set by the Internet service provider (ISP) supplying your broadband Internet connection. Any fees charged by an ISP including, without limitation, connection charges are your responsibility. A DSL modem is required to use DSL service and a cable modem is required to use cable modem service.
ENTERTAINMENT When AP is set to include 802.11 n, and if Encryption is designated as WEP(64/128bit) or WPA(TKIP/AES), the connection may not be possible. There may be different connection methods according to the AP manufacturers. Network Status To set up the network settings, 1 Press MENU to access the menu. 2 Press the Navigation buttons to NETCAST Stream movies, Game, SNS, Internet Radio or weather updates directly to your projector. Using the NETCAST 1 Press NETCAST to access the menu option.
ENTERTAINMENT NOTE The videos list searched from the projector may different with the list searched from a web browser on PC. The playback of videos may pause, stop, or buffer depending on your broadband speed. For service that requires log in, join the applicable service on the website using the PC and log in through the projector to enjoy various additional functionalities.
ENTERTAINMENT Should you have any inquiry or problem related to the Content or Services, you may refer to the Service Provider’s website for the most up-to-date information. LGE is neither responsible nor liable for customer service related to the Content and Services. Any question or request for service relating to the Content or Services should be made directly to the respective Content and Service Providers.
ENTERTAINMENT VALIDITY, TIMELINESS, LEGALITY, OR COMPLETENESS OF ANY CONTENT OR SERVICE MADE AVAILABLE THROUGH THIS DEVICE AND DOES NOT WARRANT THAT THE DEVICE OR SERVICES WILL MEET YOUR REQUIREMENTS, OR THAT OPERATION OF THE DEVICE OR SERVICES WILL BE UNINTERRUPTED OR ERROR-FREE.
ENTERTAINMENT MY MEDIA Connecting USB Storage Devices Connect USB storage devices such as a USB flash drive or external hard drive to the projector and use multimedia features. Connect a USB flash drive or USB memory card reader to the projector as shown in the following illustration. To disconnect a USB storage device, make sure to end the connection properly to prevent damages to the projector or files. 1 Press Q.MENU to access the quick menus.
ENTERTAINMENT Tips for Using USB Storage Devices Only a USB storage device is recognizable. USB hubs are not supported. A USB storage device which uses its own driver may not be recognized. The recognition speed of a USB storage device will depend on each device. Please do not turn off the projector or unplug the USB device when the connected USB storage device is operating. When such a device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged.
ENTERTAINMENT Connecting DLNA DMP (Digital Living Network Alliance, Digital Media Player) This projector can display and play many types of movie, photo and music files from your DLNA server. The Digital Living Network Alliance (DLNA) is a cross-industry organization of consumer electronics, computing industry and mobile device companies. DLNA provides consumers with easy sharing of digital media through a wired or wireless network in the home.
ENTERTAINMENT 39 Installing Nero MediaHome 4 Essentials Nero MediaHome 4 Essentials is easy to use DLNA server software for Windows.
ENTERTAINMENT Sharing Files and Folders After installing Nero MediaHome, you must add folders you wish to share. 1 Double-click the Nero MediaHome 4 Essentials icon on the desktop. Playing Shared contents You can display and play movie, photo and music content stored on your computer or other DLNA media servers. 2 Click Network icon on the left and 1 3 Click Shares icon on the left. 4 Click Local Folders tab on the 2.
ENTERTAINMENT 41 Tips for using DLNA DMP To play the file on the media server, the projector and the media server must be connected to the same access point. Because the compatibility and available playback functions on the MY MEDIA menu are tested on the bundle DLNA server (Nero MediaHome 4 Essentials) environment, file requirements and playback functions on the MY MEDIA may differ depending on media servers. Even the files that are not supported can be displayed in photo thumbnail or music thumbnail.
ENTERTAINMENT Connecting DLNA DMR (Digital Living Network Alliance, Digital Media Render) This supports remote playing of media files. Media from a compatible device (Windows 7, Mobile Phone with PlayTo, or other compatible DLNADMC device) can be “pushed” to the projector. The DMR function only works properly when the projector and PC are on the same local network. 1 To play a file, select the file by using the “Remote Play” feature in Windows 7. To do this, right-click on the file you want to play.
ENTERTAINMENT 43 MOVIE LIST * The movie list is activated once USB is detected. It is used when playing movie files on projector. Tips for playing video files Some user-created subtitles may not work properly. Some special characters are not supported in subtitles. HTML tags are not supported in subtitles. Time information in an external subtitle file should be arranged in ascending order to be played. Changing font and color in subtitles is not supported.
ENTERTAINMENT DivX supported mode File Extensions .asf .wmv Audio/ Video Video Audio Codec Profile/Level Support Explanation VC-1 Advanced Profile Advanced Profile @ Level 3 (e.g. 720p 60, 1080i 60, 1080p 30) VC-1 Simple and Main Profiles Simple Profile @ Medium Level (e.g. CIF, QVGA) Main Profile @ High Level (e.g. 1080p 30) Only streams compliant to SMPTE 421M VC-1 standard are supported. WMA Standard WMA 9 Professional DivX3.11 Video .divx .avi Audio .mp4 .
ENTERTAINMENT 45 Browsing Movie List Play video files on the screen. Your screen can display video files from a USB storage device. No. Description ❶ Thumbnail Abnormal files 1 Connect a USB storage device. 2 Press USB to access the Home Non-supported files menu. 3 Press the Navigation buttons to scroll to Movie List and press OK. 4 Press the Navigation buttons to scroll to the device you want and press OK. 5 Press Navigation buttons to select a folder or file you want and press OK.
ENTERTAINMENT 6 Play a movie by using the following menus/buttons. Options for Movie List 1 Press Q.MENU. A pop-up window will appears. 2 Press the Navigation buttons to scroll to the option and press OK. 3 Press the Navigation buttons ꔊꔋ ꕖ ꕗ ꕖ ꕘ 01:02:30 / 02:30:25 ꕚ ꕙ ꘩ Option ꕉ Hide ꕯ Exit Button Description ＜, ＞ Move to a specific frame forward or backward while playing a video. A cursor indicating the position can be viewed on the screen.
ENTERTAINMENT Option Description Subtitle The subtitles can be Language turned on or off. Language: Activated for SMI subtitles and can select the language within the subtitle. Code Page: Subtitle font selection. When set to default, contents are displayed in the language set in OPTION - Menu Language. Sync: When the video is not synchronized with the captions, it can be adjusted by 0.5 second. Position: Move the location of the subtitles. Size: Changes the subtitle font size.
ENTERTAINMENT Registering the DivX code - The DivX registration code allows you to rent or purchase the latest movies at www.divx.com/vod. To play a rented or purchased DivX file, the file’s registration code should be same as your projector’s DivX registration code. 1 Press USB to access the Home menu and press Blue. DivX(R) VOD Registration DivX(R) Deregistration ꕉ Previous 2 Press the Navigation buttons to scroll to DivX(R) VOD Registration and press OK.
ENTERTAINMENT PHOTO LIST * The projector can display JPEG files. Photo Supported File Formats PHOTO(*.JPEG) supporting file Baseline: 64 pixel (width) x 64 pixel (height) to 15360 pixel (width) x 8640 pixel (height) Progressive: 64 pixel (width) x 64 pixel (height) to 1920 pixel (width) x 1440 pixel (height) You can play JPEG files only. Non-supported files are displayed in the form of predefined icon. An error message occurs for corrupted files or file formats that cannot be played.
ENTERTAINMENT No. Description ❽ Allows you to mark certain files. Select files you want and press Color buttons. Press Red. Display the selected photo. Press Green. Mark all files in the folder. Unmark All Press Yellow. Deselect all marked files. Exit Mark Press Blue. Enter or Mode exit the Mark Mode. Option ꘤ Rotate photos. Rotates the photo 90°, 180°, 270°, 360° clockwise. Photos cannot be rotated if its width is greater than the available supported resolution height.
ENTERTAINMENT Options for Photo List 1 Press Q.MENU. A pop-up window will appears. 2 Press the Navigation buttons to scroll to the option and press OK. 3 Press the Navigation buttons to scroll to one of the following options and press OK. Set Photo View. Option Slide Speed BGM Description Selects a slideshow speed (Fast, Medium, Slow). Selects a music folder for the background music. Select Repeat or Random option. You cannot change the music folder while the background music is playing.
ENTERTAINMENT Option Description ＜, ＞ A cursor indicating the position can be played. No. Description ❶ Thumbnail Abnormal files Non-supported files Play Marked Mark All Press Red.Play the selected songs.. Press Green. Mark all files in the folder. Unmark All Press Yellow. Deselect all marked files. Exit Mark Press Blue. Enter or exit Mode the Mark Mode. ❾ Exit. following buttons. Page 1/1 Drive1 Page 1/1 001. - B01.mp3 002. - B02.mp3 003. - B03.mp3 004. - B04.
ENTERTAINMENT FILE VIEWER ❶ Supported File Formats ❷ ❸ File Viewer Supported File : XLS, DOC, PPT, TXT, XLSX, PPTX, DOCX, PDF Microsoft Office Version 97 / 2000 / 2002 / 2003 / 2007 Adobe PDF Version 1.0 / 1.1 / 1.2 / 1.3 / 1.4 File Viewer realigns the document, so it may look different than when viewed on a PC. For the documents that include images, the resolution may look lower during the realigning process. If the document volume is big or it has many pages, loading may take long time.
ENTERTAINMENT 6 Control playback by using the following buttons. ꔈPress CH to move the previous or next page. ꔈPress VOL to Zoom in or zoom out. ꔈ1. Press MENU. 2. Press the Navigation buttons to scroll to Go Page or Zoom press ∧. PLAY GAME Allows you to enjoy the games installed on the projector. 1 Press MENU to access the menu. 2 Press the Navigation buttons to scroll to OPTION and press OK. 3 Press the Navigation buttons to scroll to GAME and press OK.
CUSTOMIZING SETTINGS 55 CUSTOMIZING SETTINGS The SETUP Menu 1 Press MENU to access the menu. 2 Press the Navigation buttons to scroll to one of the following menus and press OK. 3 Press the Navigation buttons to scroll to the setting or option you want and press OK. 4 When you are finished, press OK. Menu Description CHANNEL Sets up and edit channels. PICTURE Adjusts the image quality or effect. SCREEN Adjusts the screen size, or keystone.
CUSTOMIZING SETTINGS CHANNEL Settings 1 Press MENU to access the menu. 2 Press the Navigation buttons to scroll to CHANNEL CHANNEL and press OK. 3 Press the Navigation buttons to scroll to the ꔂ Move ꔉ OK • Auto Tuning • Manual Tuning • Channel Edit setting or option you want and press OK. - To return to the previous level, press BACK. 4 When you are finished, press EXIT. The available channel settings are described in the following.
CUSTOMIZING SETTINGS Setting Picture Mode 57 Description Selects one of the preset image or customizes options in each mode for the best screen performance. You are also able to customize advanced options of each mode. You can also use this function through the PICTURE button. Mode Vivid Adjusts the video image for the retail environment by enhancing the contrast, brightness, color, and sharpness. Standard Adjusts the image for the normal environment.
CUSTOMIZING SETTINGS Advanced / Expert Control Options Setting Description Dynamic Contrast Adjusts the contrast to keep it at the best level according to the brightness of the screen. The picture is improved by making bright parts brighter and dark parts darker. Dynamic Color Adjusts screen colors so that they look livelier, richer and clearer. This feature enhances hue, saturation and luminance so that red, blue, green and white look more vivid.
CUSTOMIZING SETTINGS Setting Color Temperature 59 Description This is the function to adjust the overall color of the screen to the feeling you want. Select Cool, Medium, Warm. When Expert mode, customizes the options of each mode. Gamma: Select 1.9, 2.2, 2.4 a. Method: 2 Points - Pattern: Inner, Outer - Red/Green/Blue Contrast, Red/Green/Blue Brightness: The adjustment range is -50 - +50. b.
CUSTOMIZING SETTINGS SCREEN Settings 1 Press MENU to access the menu. 2 Press the Navigation buttons to scroll to SCREEN and press OK. 3 Press the Navigation buttons to scroll to the setting or option you want and press OK. - To return to the previous level, press BACK. SCREEN ꔂ Move ꔉ OK • PJT Mode : Front • Aspect Ratio : 16:9 • Keystone • RGB Config. 0 L R 4 When you are finished, press EXIT. The available screen settings are described in the following.
CUSTOMIZING SETTINGS AUDIO Settings 1 Press MENU to access the menu. 2 Press the Navigation buttons to scroll to AUDIO AUDIO and press OK. 3 Press the Navigation buttons to scroll to the setting or option you want and press OK. - To return to the previous level, press BACK. • Volume • Balance • Treble • Volume Booster(DTV) ꔂ Move ꔉ OK 40 0 R G 50 : Off 4 When you are finished, press EXIT. The available audio settings are described in the following.
CUSTOMIZING SETTINGS TIME Settings 1 Press MENU to access the menu. 2 Press the Navigation buttons to scroll to TIME and press OK. 3 Press the Navigation buttons to scroll to the setting or option you want and press OK. - To return to the previous level, press BACK. TIME ꔂ Move ꔉ OK • Clock • Off Time : Off • On Time : Off • Sleep Timer : Off • Auto Off : 60 min. 4 When you are finished, press EXIT. The available time settings are described in the following.
CUSTOMIZING SETTINGS 63 LOCK Settings 1 Press MENU to access the menu. 2 Press the Navigation buttons to scroll to LOCK LOCK and press OK. • Set Password • Lock System 3 Press the Navigation buttons to scroll to the setting or option you want and press OK. - To return to the previous level, press BACK. 4 When you are finished, press EXIT.
CUSTOMIZING SETTINGS Setting TV RatingChildren Description Blocks the children’s TV programs that parents do not want their children to watch. To block other TV programs, you should set the TV Rating-General feature. Rating Age Applies to TV-Y, TV-Y7 Fantasy Violence Applies to TV-Y7 TV RatingGeneral Blocks the TV programs that you want based on the ratings by using the Parental Control Function (V-Chip).
CUSTOMIZING SETTINGS 65 OPTION Settings 1 Press MENU to access the menu. 2 Press the Navigation buttons to scroll to OPTION and press OK. 3 Press the Navigation buttons to scroll to the setting or option you want and press OK. - To return to the previous level, press BACK. OPTION ꔂ Move ꔉ OK • Language • Caption : English : Service1 • Blank Image : Blue • LED Mode : Normal • Auto Power : Off • GAME 4 When you are finished, press EXIT.
CUSTOMIZING SETTINGS Setting LED Mode Description To adjust the brightness of the screen. LED Mode changes into Dimming mode automatically if use a portable battery. LED Mode changeds into Dimming mode automatically if there is no input signal. You can also use this function through the Q.MENU button. Auto Power To make projector turned on automatically when the plug of adapter is inserted. Option GAME On When connect DC plug to the projector, projector turns on automatically.
MAKING CONNECTIONS 67 MAKING CONNECTIONS Connect various external devices to the ports on the projector. Computer/Notebook DVD VCR Digital Device USB Headphone HDMI – See p.68 Component – See p.68 Composite – See p.69 RGB – See p.69 Memory storage – See p.36 Audio - See p.
MAKING CONNECTIONS Connecting to a HD receiver, DVD, or VCR player Connect a HD receiver, DVD, or VCR player to the projector and select an appropriate input mode. Component Connection Transmits the analog video and audio signals from an external device to the projector. Connect the external device and the projector with the component cable as shown in the following illustration. HDMI Connection Transmits the digital video and audio signals from an external device to the projector.
MAKING CONNECTIONS Composite Connection Transmits the analog video and audio signals from an external device to the projector. Connect the external device and the projector with the composite cable as shown in the following illustration. 69 Connecting to a PC This projector supports the Plug & Play. A PC will automatically recognize the projector and requires no driver to be installed. RGB Connection RGB IN A/V IN CO Transmits the analog video signal from your PC to the projector.
MAKING CONNECTIONS Connecting to a Headphone Listen to the sound through a headphone.
MAINTENANCE MAINTENANCE Update and clean your projector regularly to keep the best performance and to extend the product lifespan. Updating the Projector Firmware Download and install the latest firmware by connecting to the firmware update server to enhance or change the product function, or add new features. The firmware update may not work properly depending on the Internet environment. If so, you may obtain the latest firmware update from the authorized LG Electronics service center.
MAINTENANCE NOTE The software downloading time will vary depending on the software size and network conditions. During the software update procedure, do not turn off the projector or disconnect AC power, or disconnect the network. After software update, you can confirm the update software version at software Update menu. When update is completed, the projector will restart automatically in 5 seconds. The projector functions may be improved or changed by software update.
MAINTENANCE How to Fix the Lens Cap 1 Prepare the lens cap and the strap supplied as accessories. 2 Insert the end of the strap into the hole at the bottom of the lens section of the projector. 3 Fix the strap at the hole of the projector into the hole of the lens cap, and then pass the lens cap through the strp lasso.
SPECIFICATIONS SPECIFICATIONS MODEL HW300T (HW300T-JE) Resolution (Pixel) 1280 (Horizontal) × 800 (Vertical) Ratio 16:10 (Horizontal:Vertical) Panel size (mm) 11.623 Projection distance (Screen size) 0.59 m - 3.00 m (50.8 cm - 254.0 cm) Projection Offset 100 % Remote control distance 6m Video compatibility NTSC AC-DC Adapter , 5.64 A 19.
SPECIFICATIONS RGB-PC supported mode 640X350 Vertical Freq. (Hz) 70.090 Horizontal Freq.(kHz) 31.468 720X400 70.080 31.469 640X480 59.940 31.469 800X600 60.310 37.879 1024X768 60.000 48.363 1152X864 60.053 54.348 1280X768 59.870 47.776 1280X800 60.000 49.680 1360X768 60.015 47.712 1280X1024 60.020 63.981 1400X1050 59.979 65.317 1680X1050 60.000 65.300 Format If the projector does not support the input signal, “Invalid Format” message appears on the screen.
The model and serial number of the projector is located on the back or one side of the projector. Record it below should you ever need service.
