ENGLISH OWNER’S MANUAL LCD MONITOR Please read this manual carefully before operating your set and retain it for future reference. LCD MONITOR MODEL IPS225P IPS235P www.lg.
TABLE OF CONTENTS CONTENTS ENGLISH ENG 3 ASSEMBLING AND PREPARING 21 TROUBLESHOOTING 3 Unpacking 4 Parts and buttons 23 SPECIFICATIONS 6 Setting up the Monitor set 23 IPS225P 6 - Attaching the Stand Base 24 IPS235P 6 - Detaching the Stand Base 25 Preset Modes (Resolution) 7 - Mounting on a table 25 Indicator 9 - Using the Pivot function 10 - Mounting on a wall 11 USING THE MONITOR SET 11 Connecting to a PC 11 - D-SUB connection 11 - DVI-D connection 11 - HDMI conn
ASSEMBLING AND PREPARING 3 ASSEMBLING AND PREPARING Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. CD(Owner's Manual) / Card D-SUB Cable (This signal cable may be attached to this product before shipping out.) Stand Base Power Cord DVI-D Cable (This cable is not included in all countries.
ASSEMBLING AND PREPARING Parts and buttons ENGLISH ENG Power Indicator yyLighting On: Turned on yyLighting Off: Turned off (Power Button) Button (See p.13) Connection panel (See p.
ASSEMBLING AND PREPARING Button Description Accesses the main menus.(See p.13) OSD LOCKED/ UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for several seconds. The message "OSD LOCKED" should appear. You can unlock the OSD controls at any time by pushing the MENU button for several seconds. The message "OSD UNLOCKED" should appear. MODE Use this button to enter USER, MOVIE,TEXT,PHOTO,sRGB menus.(See p.
ASSEMBLING AND PREPARING ENGLISH ENG Setting up the Monitor set Detaching the Stand Base Attaching the Stand Base 1 Place the Monitor set with the screen side down on a flat and cushioned surface. 1 Place the Monitor set with the screen side down on a flat and cushioned surface. CAUTION Lay a foam mat or soft protective cloth on the surface to protect the screen from damage. 2 Turn the screw to the left, and then pull out the Stand Base from the Stand Body.
ASSEMBLING AND PREPARING Mounting on a table NOTE position on a table. Tilt from +15 to -5 degrees up or down to adjust the angle of the Monitor set to suit your view. -5 Leave a 10 cm (minimum) space from the wall for proper ventilation. 15 10 cm 10 cm 10 cm 10 cm Front Rear • Swivel Range : -45°~45°(+/- 2°) 2 Connect the Power Cord to a wall outlet. -45° ~ 45°(+/- 2°) • Height Range : maximum 5.12 inch (130.0 mm) 130.
ASSEMBLING AND PREPARING Using the Kensington security system WARNING ENGLISH ENG The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com . • When adjusting the angle of the screen, do not put your finger(s) in between the head of the monitor and the stand body. You can hurt your finger(s).
ASSEMBLING AND PREPARING 9 Using the Pivot function 1. Lift the monitor to its highest height to utilize the Pivot function. 2. Landscape & Portrait : You can rotate the panel 90°clockwise. Please be cautious and avoid contact between the monitor head and the Stand Base when rotating the screen to access the Pivot function. If the monitor head touches the Stand Base, then the Stand Base could crack. Head section ....... Stand section ..... 3. Be careful with the cables when rotating the screen.
ASSEMBLING AND PREPARING Mounting on a wall Model ENGLISH ENG For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.
USING THE MONITOR SET 11 USING THE MONITOR SET Your Monitor set supports Plug & Play*. yy *Plug & Play: A PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention. DVI-D connection Transmits a digital video signal from your PC to the Monitor set. Connect the PC and the Monitor set with a DVI cable as shown in the following illustrations. D-SUB connection Transmits analog video from your PC to the Monitor set.
USING THE MONITOR SET CAUTION ENGLISH ENG Connect the signal yy input cable and tighten it by turning the screws clockwise. Do not press the screen with your finger for yy a long time as this may result in temporary distortion on the screen. Avoid displaying a fixed image on the yy screen for a long period of time to prevent image burn. Use a screensaver if possible. NOTE When you want to use two PC in our Monitor, yy please connect the signal cable(D-SUB/ DVI-D/HDMI) respectively in Monitor set.
CUSTOMIZING SETTINGS 13 CUSTOMIZING SETTINGS ENG ENGLISH Accessing The Main Menus 1 Press any button on the bottom of the Monitor set to display the MONITOR SETUP OSD menu. 2 Press the desired menu item. 3 Change the value of the menu item by pressing the buttons on the bottom of the Monitor set. To return to the upper menu or set other menu items, use the up arrow ( ) button. 4 Select EXIT to leave the OSD menu. Monitor set Buttons MENU (See p.14) Sets the screen options. DUAL (See p.
CUSTOMIZING SETTINGS Customizing Settings ENGLISH ENG Menu Settings 1 Press any button on the bottom of the Monitor set to display the MONITOR SETUP OSD menu. 2 Press the MENU button to display the options in the OSD menu. 3 Set the options by pressing the buttons on the bottom of the Monitor set. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. The available program settings are described below.
CUSTOMIZING SETTINGS 15 PICTURE the MONITOR SETUP OSD menu. 2 Press the MENU button to display the options in the OSD menu. 3 Select PICTURE by pressing the buttons on the bottom of the Monitor set and set the options. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. The available picture settings are described below. Menu Description BRIGHTNESS To adjust the brightness of the screen.
CUSTOMIZING SETTINGS COLOR ENGLISH ENG 1 Press any button on the bottom of the Monitor set to display the MONITOR SETUP OSD menu. 2 Press the MENU button to display the options in the OSD menu. 3 Select COLOR by pressing the buttons on the bottom of the Monitor set and set the options. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. The available picture settings are described below.
CUSTOMIZING SETTINGS 17 DISPLAY the MONITOR SETUP OSD menu. 2 Press the MENU button to display the options in the OSD menu. 3 Select DISPLAY by pressing the buttons on the bottom of the Monitor set and set the options. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. The available picture settings are described below. Menu Description HORIZONTAL To move image left and right. VERTICAL To move image up and down.
CUSTOMIZING SETTINGS OTHERS ENGLISH ENG 1 Press any button on the bottom of the Monitor set to display the MONITOR SETUP OSD menu. 2 Press the MENU button to display the options in the OSD menu. 3 Select OTHERS by pressing the buttons on the bottom of the Monitor set and set the options. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. The available picture settings are described below.
CUSTOMIZING SETTINGS 19 MODE Setting 2 Press the MODE button to display the options in the OSD menu. 3 Set the options by pressing the buttons on the bottom of the Monitor set. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. The available picture settings are described below. Menu Description USER It is a mode that the user can adjust each element. It can adjust the color mode of the Main Menu.
CUSTOMIZING SETTINGS DUAL PACKAGE Setting ENGLISH ENG * Before using below functions, please install DUAL PACKAGE programme. * Only for D-SUB/DVI-D input. 1 Press any button on the bottom of the Monitor set to display the MONITOR SETUP OSD menu. 2 Press the DUAL button to display the options in the OSD menu. 3 Set the options by pressing the buttons on the bottom of the Monitor set. 4 Select EXIT to leave the OSD menu.
TROUBLESHOOTING 21 Check the following before calling for service. No image appears Is the power cord of the display connected? Is the power indicator light on? Is the power on and the power indicator blue or green? Is the power indicator flickering? Do you see an "OUT OF RANGE" message on the screen? Do you see a "CHECK SIGNAL CABLE" message on the screen? yy Check and see if the power cord is connected properly to the power outlet. yy Press the Power button. yy Adjust the brightness and the contrast.
TROUBLESHOOTING CAUTION ENGLISH ENG Check Control Panel ► Display ► Settings and see if the frequency or the resolution were yy changed. If yes, readjust the video card to the recommend resolution. If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the yy screen may be dimmed, truncated or biased. Make sure to select the recommend resolution.
SPECIFICATIONS 23 IPS225P Display Screen Type Weight 5.45 kg Range Tilt -5° to 15° Swivel -45° ~ 45°(+/- 2°) Height 130.0 mm(5.12 inch) 54.5 cm (21.5 inch) Flat Panel Active matrix-TFT LCDAnti-Glare coating Visible diagonal size: 54.5 cm Pixel Pitch 0.247 mm x 0.247 mm (Pixel Pitch) Sync Input Horizontal Frequency 30 kHz to 83 kHz (Automatic) Vertical Frequency 56Hz to 75Hz (D-SUB, DVI-D) 56Hz to 61Hz (HDMI) Input Form Separate Sync.
SPECIFICATIONS ENGLISH ENG SPECIFICATIONS IPS235P Display Screen Type Weight 5.75 kg Range Tilt -5° to 15° Swivel -45° ~ 45°(+/- 2°) Height 130.0 mm(5.12 inch) 58.4 cm (23 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 58.4 cm Pixel Pitch 0.265 mm x 0.265 mm (Pixel Pitch) Sync Input Horizontal Frequency 30 kHz to 83 kHz (Automatic) Vertical Frequency 56Hz to 75Hz (D-SUB, DVI-D) 56Hz to 61Hz (HDMI) Input Form Separate Sync.
SPECIFICATIONS 25 Preset Modes (Resolution) Horizontal Frequency(kHz) Vertical Frequency(Hz) Polarity(H/V) 720 x 400 31.468 70 -/+ 640 x 480 31.469 60 -/- 640 x 480 37.500 75 -/- 800 x 600 37.879 60 +/+ 800 x 600 46.875 75 +/+ 1024 x 768 48.363 60 -/- 1024 x 768 60.123 75 -/- 1152 x 864 67.500 75 +/+ 1280 x 1024 63.981 60 +/+ 1280 x 1024 79.976 75 +/+ 1680 x 1050 65.290 60 -/+ 1920 x 1080 67.
Make sure to read the Safety Precautions before using the product. Keep the Owner’s Manual (CD) in an accessible place for future reference. The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service. MODEL SERIAL ENERGY STAR is a set of power-saving guidelines issued by the U.S.Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc.