ENGLISH OWNER’S MANUAL IPS LED MONITOR Please read this manual carefully before operating your set and retain it for future reference. IPS LED MONITOR MODEL IPS237L IPS277L www.lg.
TABLE OF CONTENTS Contents ENGLISH ENG 3 ASSEMBLING AND PREPARING 3 Unpacking 4 Parts and buttons 5 Setting up the Monitor set 5 - Attaching the Stand Base 6 - Detaching the Stand Base 6 - Mounting on a table 7 22 TROUBLESHOOTING 24 SPECIFICATIONS 24 IPS237L 25 IPS277L 26 Preset Modes (Resolution) - Using the cable holder 26 Indicator 9 USING THE MONITOR SET 27 Proper posture 9 Connecting to a PC 27 Proper posture for using the Monitor set.
ASSEMBLING AND PREPARING 3 ASSEMBLING AND PREPARING Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. or CD(Owner's Manual) / Card D-SUB Cable (This cable is not included in all countries.) MHL Cable (This cable is not included in all countries.
ASSEMBLING AND PREPARING Parts and buttons ENGLISH ENG Power Indicator yyLighting On: Turned on yyLighting Off: Turned off (Power Button) Button (See p.12) Connection panel (See p.
ASSEMBLING AND PREPARING Setting up the Monitor set 5 3 Secure the monitor and the Stand Body with Attaching the Stand Base 1 Place the Monitor set with the screen side down on a flat and cushioned surface. CAUTION Lay a foam mat or soft protective cloth on the surface to protect the screen from damage. 2 Attach the Stand Body to the monitor. Insert the two Lockers of the Stand Body right into the groove of the monitor head and secure them by pressing the left and right bottom sides.
ASSEMBLING AND PREPARING ENGLISH ENG Detaching the Stand Base Mounting on a table 1 Place the monitor with the screen side down on 1 Lift and tilt the Monitor set into its upright a flat and cushioned surface. position on a table. Leave a 10 cm (minimum) space from the wall for proper ventilation. 2 Turn the screw to the left, and then pull out the Stand Base from the Stand Body. 10 cm 10 cm 10 cm 10 cm 3 Remove 2 screws and pull out the Stand Body from the monitor.
ASSEMBLING AND PREPARING 3 Press (Power) button on the bottom switch panel to turn the power on. 7 Using the cable holder ENG ENGLISH CAUTION Unplug the power cord before moving the Monitor to another location. Otherwise electric shock may occur.
ASSEMBLING AND PREPARING warning Using the Kensington security system ENGLISH ENG When you adjust the angle, do not hold the bottom of the Monitor set frame as shown on the following illustration, as may injure your fingers. The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com .
USING THE MONITOR SET 9 USING THE MONITOR SET Your Monitor set supports Plug & Play*. yy *Plug & Play: A PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention. HDMI connection Transmits the digital video and audio signals from your PC or A/V to the Monitor set. Connect the PC or A/V and the Monitor set with the HDMI cable as shown in the following illustrations. D-SUB connection Transmits analog video from your PC to the Monitor set.
USING THE MONITOR SET Connecting to a Mobile Phone ENGLISH ENG MHL(Mobile High-definition Link) connection Transmits the digital audiovisual signals from your mobile phone to the monitor set. Connect the mobile phone to the monitor set with the MHL cable as shown in the following illustrations. HDMI2/MHL HDMI1 NOTE Connect the mobile phone to the HDMI2/MHL port yy to view the phone screen on the monitor set. This only works for the MHL supported phone.
USING THE MONITOR SET CAUTION NOTE When you want to use two PC in our Monitor, yy please connect the signal cable(D-SUB/ HDMI) respectively in Monitor set. If you turn the Monitor set on while it is cold, yy the screen may flicker. This is normal. Some red, green, or blue spots may appear yy on the screen. This is normal. Self Image Setting Function Press the power button on the bottom panel to turn the power on.
CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS ENGLISH ENG 1 Press the desired button on the bottom of the Monitor set. 2 Change the value of the menu item by pressing the buttons on the bottom of the Monitor set. To return to the upper menu or set other menu items, use the up arrow ( ) button. 3 Select EXIT to leave the OSD menu. MENU MY KEY FUNC. AUTO INPUT EXIT Monitor set Buttons Button Description Accesses the main menus.(See p.
CUSTOMIZING SETTINGS 13 Customizing Settings ENG ENGLISH Menu Settings 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Set the options by pressing the ◄ or ► or ▼ buttons. 3 Select the "NEXT MENU" button to enter the more option settings. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.
CUSTOMIZING SETTINGS PICTURE ENGLISH ENG 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the "NEXT MENU" button to enter the more option settings. 3 Enter to PICTURE by pressing the ▼ button. 4 Set the options by pressing the ◄ or ► or ▼ buttons. 5 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.
CUSTOMIZING SETTINGS 15 COLOR ENG ENGLISH 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the "NEXT MENU" button to enter the more option settings. 3 Select COLOR by pressing the ► button. 4 Enter to COLOR by pressing the ▼ button. 5 Set the options by pressing the ◄ or ► or ▼ buttons. 6 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.
CUSTOMIZING SETTINGS DISPLAY ENGLISH ENG 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the "NEXT MENU" button to enter the more option settings. 3 Select DISPLAY by pressing the ► button. 4 Enter to DISPLAY by pressing the ▼ button. 5 Set the options by pressing the ◄ or ► or ▼ buttons. 6 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.
CUSTOMIZING SETTINGS 17 OTHERS ENG ENGLISH 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the "NEXT MENU" button to enter the more option settings. 3 Select OTHERS by pressing the ► button. 4 Enter to OTHERS by pressing the ▼ button. 5 Set the options by pressing the ◄ or ► or ▼ buttons. 6 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.
CUSTOMIZING SETTINGS MY KEY Setting ENGLISH ENG 1 Press MY KEY button on the bottom of the Monitor set to display the MY KEY OSD. 2 Set the options by pressing the ◄or►or▼buttons. 3 Select EXIT to leave the OSD menu. Each option is explained below. MY KEY MY KEY SETTING Description MY KEY is short key. You can select one of FUNC. (SUPER ENERGY SAVING, DUAL DISPLAY, DUAL WEB, TRUE COLOR FINDER) as your favorite feature.
CUSTOMIZING SETTINGS 19 FUNC. Setting ENG ENGLISH SUPER ENERGY SAVING 1 Press FUNC. button on the bottom of the Monitor set to display the FUNC. OSD. 2 Enter to SUPER ENERGY SAVING by pressing the ▼ button. 3 Set the options by pressing the ◄ or ► or ▼buttons. 4 Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.
CUSTOMIZING SETTINGS * Before using below functions, please install DUAL PACKAGE programme. ENGLISH ENG DUAL DISPLAY 1 Press FUNC. button on the bottom of the Monitor set to display the FUNC. OSD. 2 Select DUAL DISPLAY by pressing the ► button. 3 Enter to DUAL DISPLAY by pressing the ▼ button. 4 Set the options by pressing the ◄ or ► buttons. 5 Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.
CUSTOMIZING SETTINGS 21 TRUE COLOR FINDER ENG ENGLISH 1 Press FUNC. button on the bottom of the Monitor set to display the FUNC. OSD. 2 Select TRUE COLOR FINDER by pressing the ► button. 3 Enter to TRUE COLOR FINDER by pressing the ▼ button. 4 Set the options by pressing the ◄ or ► buttons. 5 Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.
TROUBLESHOOTING ENGLISH ENG TROUBLESHOOTING Check the following before calling for service. No image appears Is the power cord of the display connected? yy Check and see if the power cord is connected properly to the power outlet. Is the power indicator light on? yy Press the Power button. yy Adjust the brightness and the contrast.
TROUBLESHOOTING 23 CAUTION Display image is incorrect The screen color is mono or abnormal. yy Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. yy Make sure the video card is properly inserted in the slot. yy Set the color setting higher than 24 bits (true color) at Control Panel ► Settings. The screen blinks. yy Check if the screen is set to interlace mode and if yes, change it to the recommend resolution.
SPECIFICATIONS ENGLISH ENG SPECIFICATIONS IPS237L Display Screen Type 58.4 cm (23 inch) Flat Panel Active matrix-TFT LCDAntiGlare coating Visible diagonal size: 58.4 cm Sync Input Pixel Pitch Horizontal Frequency Vertical Frequency 0.265 mm x 0.265 mm (Pixel Pitch) 30 kHz to 83 kHz (Automatic) 56Hz to 75Hz (D-SUB) 56Hz to 61Hz(HDMI) Separate Sync. HDMI 15 pin D-SUB Connector / HDMI Connector RGB Analog (0.
SPECIFICATIONS 25 ENG ENGLISH SPECIFICATIONS IPS277L Display Screen Type 68.6 cm (27 inch) Flat Panel Active matrix-TFT LCDAntiGlare coating Visible diagonal size: 68.6 cm Sync Input Pixel Pitch Horizontal Frequency Vertical Frequency 0.3114 mm x 0.3114 mm (Pixel Pitch) 30 kHz to 83 kHz (Automatic) 56Hz to 75Hz (D-SUB) 56Hz to 61Hz(HDMI) Separate Sync. HDMI 15 pin D-SUB Connector / HDMI Connector RGB Analog (0.
SPECIFICATIONS Preset Modes (Resolution) ENGLISH ENG IPS237L/IPS277L Display Modes (Resolution) Horizontal Frequency(kHz) Vertical Frequency(Hz) Polarity(H/V) 720 x 400 31.468 70 -/+ 640 x 480 31.469 60 -/- 640 x 480 37.500 75 -/- 800 x 600 37.879 60 +/+ 800 x 600 46.875 75 +/+ 1024 x 768 48.363 60 -/- 1024 x 768 60.023 75 +/+ 1152 x 864 67.500 75 +/+ 1280 x 1024 63.981 60 +/+ 1280 x 1024 79.976 75 +/+ 1680 x 1050 65.290 60 -/+ 1920 x 1080 67.
Proper posture 27 ENG ENGLISH Proper posture Proper posture for using the Monitor set. Adjust the Monitor set and your posture to allow you to view images at the optimal viewing angle. Place your hands gently on the keyboard, keeping your arms bent at the elbows and horizontally outright. Adjust the location of the Monitor set to avoid it reflecting light.
Make sure to read the Safety Precautions before using the product. Keep the Owner’s Manual (CD) in an accessible place for future reference. The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service. MODEL SERIAL ENERGY STAR is a set of power-saving guidelines issued by the U.S.Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc.
