User guide

A7
Using the Auto Pivot and Auto Mirror functions
Notice
The Forte Manager software requires Microsoft Explorer 6.0 or later.
When the Auto Mirror function is engaged, the direction of the OSD
(On Screen Display) menu will not change if it is rotated by 180°. (See the figure below)
The response time (speed) for the Auto Pivot and Auto Mirror functions may vary
depending on the video card and the PC's performance, None of these functions is
supported in DOS mode.
Update the video card driver on your PC to the latest version when the Forte
Manager does not work properly or is out of order.
This model supports Auto Pivot (automatic rotation) and Auto Mirror
(automatic up/down reverse) functions.
To use these functions, first install the provided Forte Manager software, and then set to
Automatic.(Manual is the default setting when you initially purchase the product.)
- Refer to the installation guide, which is included on the CD for more details on the installation
-To set to Automatic, select Forte Manager -> Option -> Pivot -> Enable Auto Pivot.
Auto Pivot
Screen rotation : You can rotate the monitor clockwise by 180 degrees.
<When rotated by 90
degrees>
<When rotated by 180
degrees>
❉ Caution : Do not touch the screen while you rotate the panel.
<Pushing the screen
backwards>
<Rotating clockwise>
➪ Refer to the next page for Auto Mirror function.
➪ This rear view represents a typical model. Your display model may differ from the illustration below.
Tilt the screen
while rotating
it so that the monitor
does not touch
the floor.
Do not hold the
screen area as
shown in the picture
when rotating it,
otherwise your
fingers might get
hurt or get stuck.